LLG Catalogue
b.safe-Caps, GL 45, PPS, Starter box C
Initial equipment for HPLC with b.safe-Caps for bottles with thread GL 45. Furthermore fittings for easy connection of capillary tubing, blind fittings for closing unused connections and air valves for a trouble-free withdrawal of solvents are included. For up to 4 storage bottles. Scope of supply: 4 x b.safe-cap GL 45 with 3 connections UNF ¼" 28G, 4 x air valve with service life indicator, 12 x fittings yellow for tubing O.D. 3.2 mm, 8 x blind fittings
b.safe-Caps, GL45, PPS
Screw cap for thread GL 45 made of PPS, freely turnable distributor body made of PTFE with female threads UNF ¼" 28 G for connecting capillary tubing (O. D. 3.2 mm) or a b.safe air valve with service life indicator.Scope of supply:Connections, fittings (PFA), blind fittings (PFA), air valve
Baffled flasks DURAN®
With GL 45 threadOxygen introduction is often a limiting factor for cell growth.Baffled flasks cause a turbulent flow, increase the gas exchange surface and produce a higher oxygen transfer.Automated one-step production enables a reproducible and comparable result.Complete with membrane screw cap (gas exchange).
Baffled flasks, Pyrex®borosilicate glass
Manufactured from Pyrex® borosilicate glassExhibits 4 baffle indents to provide optimal and consistant agitation
Baffled Wide-mouth bottles, GLS 80®, DURAN®, with screw cap
Baffled Wide-mouth bottle with three vertical baffles in the inner surface of the GLS 80® bottles which disrupt a swirling motion. The baffles improve the top-to-bottom circulation and produce a greater radial mixing. The baffles also offer other advantages such as suppressing the formation of a central vortex, and reducing dead-zones where mixing does not occur.Compatible with both the DURAN® GLS 80® magnetic stirrers, and other magnetic stir barsManufactured from DURAN® borosilicate 3.3 glassFully autoclavableThe wide 65 mm inner diameter of the GLS 80® wide mouth provides easy access to the contents, or for cleaningThe baffles are moulded into the glass side wall of the bottles and form a continuous, smooth inner surface making clean up easyCompatible with full range of wide mouth GLS 80® connection cap systems for liquid addition or removal when mixing with stir bars.The bottles feature an easy-to-read graduated volume scaleWith pouring ringApplicationsAeratingDissolvingEmulsifyingHomogenizingMixingSuspending
Bag for Half Masks
Carrying and Storage Bag for Half Masksoffers space for all common half masks and filtersstable, due to integrated support-boundwith shoulder strap and belt loopvery tough and washablewater resistance and dust proofvery light only 150g approx.
Bag mounting strips
Magnetic bag mounting strips made of stainless steel. For attaching vessels to the magnetic platform.
Balance bench with granite slab
Constructed to absorb vibrations and oscillations, which would otherwise distort the weighing result. With a granite slab positioned on absorbing rubber components as surface for placing the analytical balance. The work surface surrounds the slab and offers many storage options. The sturdy aluminium frame has four height-adjustable feet, which can be used to accurately level the balance bench on an uneven floor. The inlet on front of the table offers the possibility to work at the bench in an ergonomic standing or seated position without touching the table. All surfaces are easy and hygienic to clean.
Balance benches
The balance benches are available in heights of 750 mm and 900 mm. The balance benches are designed to attenuate external vibrations.Thanks to its large mass and oscillation-damped mounting, the balance block is ideal for low-vibration balance platform.The balance block is mechanically separated from the outer chassis of the balance bench, so vibrations caused by impact on the edge of the bench are not transferred directly to the balance block.
Balance brush
Split quill brushes, oval, fine hair mixture, wooden handle.*consisting of one brush each size 2 / 6 mm, size 4 / 9 mm and size 6 / 12 mm
Balances, electronic, analytical, ABT series
Analytical and semi-microbalances which are suitable for verification.All models have automatic calibration adjustment function by internal, motor-driven, calibration weight. It is possible to log ISO / GLP-compliant weighing or calibration data at any time via an accessory printer (not supplied) or data interface (bi-directional RS232-C).Additionally, the balances have formulation, piece counting and percentage determination functions, as well as a flush-mounted weighing platform. All models are supplied with a modern, all-glass draught shield with sliding doors to the left, right and top.Also available with DKD certified, ionizer, thermal printer, statistic printer at additional cost.Single-cell advanced technology:Fully automatic manufactured weighing cell from one piece of materialStable temperature behaviorShort stabilisation time: Steady weight values within approx. 4 sec under laboratory conditionsShock proof constructionHigh corner load performance
Balances, electronic, compact, 440 series
With features including formulation, piece counting programmes and high accuracy these balances are ideal for routine laboratory tasks. Safety cover for keyboard and housing standard. Calibration adjustment programme maintains accuracy. LCD display with digit height 15 mm. Can be battery operated (9 V Block). With stainless steel balance platform, except 440-21A.
Balances, electronic, precision, 572 series
Weighing speed adjustable in two stages. Unit transfer to bullion and non-metric units of weight. With calibration adjustment programme. With net / total weighing. Piece counting: 1, 5, 10 or 20 reference pieces. Percentage weighing. Bi-directional RS232C data output supplied. Ultra low-profile, metal casing (W x D x H): 150 x 310 x 60mm. Supplied with mains adapter for 230V 50/60Hz. Balances can be alternatively operated by accessory batteries.Also available with DKD certified calibration weight, thermal printer, statistic printer, rechargeable battery pack or label printer at additional cost.
Ball members, DURAN® tubing
Made of DURAN® tubing. DIN 12264 and in addition to DIN standard.
Ball mills with lid, porcelain
Metal lock and sealing rings, glazed inside and outside.
Balls, PTFE
PTFE balls minimize "bumping" during boiling. They are inert and can be used up to 288°C. 100 balls per package.For column packing and mixing bedsResistant to most chemicalsNon-contaminating
Bandages aluderm® DIN, sterile
aluderm® compress with aluminium vapour coating and strong suction, sealed onto an elastic WS-fixing bandage. Bandages with SÖHNGEN® no-touch-winding.Low risk of stranglingDIN 13151Individually sterile packed
Barrel funnels, HDPE
Transparent. Rapid flow due to a steep 60° angle. Practical handle for hanging. Suitable for filling large amounts of liquids.