Accessories for water baths Optima™ series
Drain syphon SY1: For the rapid draining of baths.Heat exchange coil CW5: For use with precision and general purpose stirred baths. Temperature range 2 °C above coolant temperature. Coil diameter/l mm 77/55, pipe bore inlet/outlet 7mm.PP spheres PS20: Between operating temperatures 60 °C and 100 °C and below room temperature a lid or layers of polypropylene spheres can be used. Above 100 °C a lid must be used.
Bath tanks for Temperature control systems IC/ICC, plastic
Plastic tanks up to 100 °C, only for water.
Bath tanks for Temperature control systems IC/ICC, stainless steel
Stainless steel tanks up to 200 °C, with bath drain.
Bridge circulators MAGIO MS and MX
Thanks to the adjustable stainless steel bridge the thermostats can be used with bath tanks up to a filling volume of 100 litres and bath widths from 33 to 68 cm.Simple control of complex applicationsInfinitely adjustable, extremely powerful pressure and suction pumpLarge, high-resolution TFT touch display with multilingual user interfaceMedium-contacting parts made of stainless steelIntegrated programmerExternal Pt100 connectionUSB interfaceRS232 interfaceEthernet interfaceAnalogue interfaces (optionally)Classification III according to DIN 12876-1
Circulation thermostat PT31
The PT31 circulation thermostat is equipped with high performance functions. The device is ideally suited for applications requiring a temperature range at a constant level. The robust locking mechanism of the PT31 provides a sturdy connection and ensures constant temperature control of the medium.Temperature control using Peltier technologySpace-saving, sturdy designSuitable for operation with non-flammable liquids (water or water/glycol mixture)
Circulator baths CORIO™ CP
With insulated stainless steel bath tanks, flexible performance and an operating temperature range of up to 200 °C. Temperature control is possible either in the internal bath or in a connected external application.Suitable for internal and external applicationsHigh-quality stainless steel bath vessels with bath lid and drainIntegrated pump connections M16 x 1Integrated cooling coil for counter-coolingBright, white, easily visible display, even from a distanceLow-level warning systemEasy switching between internal and external circulationPowerful, continuously variable pumpPump capacity adjustable from 8 to 27 l/minVery quietRubber feet for secure standingUSB connectionRS232 interface3-point calibrationClass III (FL) according to DIN 12876-1Scope of supply: Circulator bath, mains power cable, connection box, bath, bath cover, hose connectors 8 and 12 mm
Circulator Baths, CORIO™ CD
CORIO™ CD Heating Circulators for internal and external temperature applications with stainless steel baths for working temperatures from 20 °C to 150 °C. CORIO™ Heating Circulators feature professional technology for demanding applications. These units facilitate internal temperature control in the bath tank or control of externally connected applications.For internal and external applicationsBright, white, easy to read displayVery quietPump change-over between internal and external circulationUSB connectionHigh-quality bath tanks made of stainless steel with bath lid and drain tapIntegrated cooling coil for counter-cooling
Clamp for Thermostatic controllers Optima™ T100 / TC120 / TX150 / TXF200
For attaching the thermostats to any vertical sided tank with a maximum wall thickness of 35 mm for rectangular tanks, 30 mm for circular tanks (300 mm diameter), and a capacity of up to 50 l.
Coliform Bath MX
This bath is ideal for fecal coliform and E.coli testing.MX Temperature Controller Includes gabled, see-through coverIncludes cooling coil portOver-temperature protectionSingle-point calibration capabilitySpecificationsBath capacity:28 lWorking temperature range:Amb. +10 °C ... 135 °CTemperature stability:± 0.007 °CHeating power:1100 WDisplay:3.25" LCDFlow rate max.:11.9 l/minPressure max.:0.12 barOverall dimensions (W x D x H):546 x 353 x 457 mmWeight:29.9 kgSafety class:FL, IPower supply:240 VAC, 50 Hz
Compact Immersion circulator ICC basic
Compact immersion thermostat for tempering of liquids in open or covered vessels. The adjustable pressure and suction pump allows the ICC basic to be used for internal or external applications. A holding clamp for attaching the circulator to a bath is included. An optional cooling coil can be connected to the unit for temperature control below or near the ambient temperature. The ICC basic can be easily transported with the carrying handle and safely stored with the integrated stand.Complete packages with all necessary components (bath vessels, covers, bath bridges, pump connection sets and cooling coils) are also available. Visual and acoustic warning functions for excess temperature, sub-level and over-levelLED display for temperature and pump adjustmentMenu navigation via push and turn buttonsAdjustable safety circuitCalibration optionUSB/RS 232 interface
Compact Immersion circulator ICC control
Compact immersion thermostat for tempering of liquids in open or covered vessels. The adjustable pressure and suction pump allows the ICC control to be used for internal or external applications. Up to 10 individual programs with up to 10 steps can be stored in the device. A holding clamp for attaching the circulator to a bath is included. An optional cooling coil can be connected to the unit for temperature control below or near the ambient temperature. The ICC control can be easily transported with the carrying handle and safely stored with the integrated stand.Complete packages with all necessary components (bath vessels, covers, bath bridges, pump connection sets and cooling coils) are also available. Visual and acoustic warning functions for excess temperature, sub-level and over-levelTFT touch display for displaying and controlling all relevant parametersAdjustable safety circuitConnection for external Pt100 temperature probeUSB/RS 232 interface
Heated circulating bath with stainless steel tank Optima™ T100-ST series
Universal use with precise temperature control for simple applications in a setting range from 0 to 100 °C.3 programmable temperature presetsLow liquid protection and fixed over temperature cut-outVisual alarm in case of malfunctionsClear, bright, 4 digit LED displayThermostat can be used in combination with any other Grant stainless steel tank or with a T-CLAMP with any vertical sided tankScope of supply: Thermostat, bridge plate, stainless steel tankFor cooling below ambient temperature, please order cooler separately.
Heated circulating bath with stainless steel tank Optima™ TC120-ST series
For general applications requiring precise temperature control in a setting range of -15 to 120 °C.Simple, intuitive user interface: dial and 2 function buttons3 programmable temperature presetsLow liquid protection and adjustable over temperature cut-outCountdown timer with audible alarmClear, bright, 4 digit LED displayThermostat can be used in combination with any other Grant stainless steel tank or with a T-CLAMP with any vertical sided tankScope of supply: Thermostat, bridge plate, stainless steel tankFor cooling below ambient temperature, please order cooler separately.
Heated Circulating Baths with Advanced Digital (AD) Temperature Controller
The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.Reservoir sizes ranging from 7 liters to 75 liters Pressure and suction pump (selected models)LidDock™ lid holderDuraTop™, precision-molded phenolic bath top resists laboratory chemicalsWhisperCool® Environmental Control SystemCool Command™ refrigeration systemWashable air filterLarge bath opening and drainEasy hook-up of fluid connectionsIntuitive setup and operation, featuring multi-language help and screen promptsSimplified setup and maintenanceOver-temperature protectionSafety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)Working Temperature: Ambient +10 °C to 200 °CTemperature Stability: ±0.01 °CIntuitive 3.75" (9.5 cm) display with touch-pad control4 languages: French, German, Spanish, EnglishSwivel 180™ Rotating ControllerVariable speed pump with open- and closed-loop external circulation capabilityPump pressure max. 3.6 psi (0.25 bar) On-board connectivity: USB-A & B, Ethernet, RS-232 / RS-485 and external temperature probeOn-screen promptsAutomatic performance optimization and specific heat tuningSingle-point calibration capability
Heated Circulating Baths with Advanced Programmable (AP) Temperature Controller
The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.Reservoir sizes ranging from 7 liters to 75 liters Pressure and suction pump (selected models)LidDock™ lid holderDuraTop™, precision-molded phenolic bath top resists laboratory chemicalsWhisperCool® Environmental Control SystemCool Command™ refrigeration systemWashable air filterLarge bath opening and drainEasy hook-up of fluid connectionsIntuitive setup and operation, featuring multi-language help and screen promptsSimplified setup and maintenanceOver-temperature protectionSafety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)Working Temperature: Ambient +10 °C to +200 °CTemperature Stability: ±0.005 °COpen mode programmingIntuitive 4.3" (10.9 cm) SmartTouch display11 languages: French, German, Spanish, Chinese, Arabic, English, Portuguese, Russian, Hindi, Italian, KoreanVariable speed pump with open- and closed-loop external circulation capabilityPump pressure max. 3.6 psi (0.25 bar) Swivel 180™ Rotating ControllerOn-board connectivity: USB-A & B, Ethernet, RS-232 / RS-485, remote on/off and external temperature probeEvent scheduling (time & date) with real-time clockReview temperature trends for up to 10 daysMultiple selectable "home" screensOn-screen helpAutomatic and/or user-adjustable performance optimization10-point calibration capability
Heated Circulating Baths with MX Temperature Controller
The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.Reservoir sizes ranging from 7 liters to 75 liters Pressure and suction pump (selected models)LidDock™ lid holderDuraTop™, precision-molded phenolic bath top resists laboratory chemicalsWhisperCool® Environmental Control SystemCool Command™ refrigeration systemWashable air filterLarge bath opening and drainEasy hook-up of fluid connectionsIntuitive setup and operation, featuring multi-language help and screen promptsSimplified setup and maintenanceOver-temperature protectionSafety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)Working Temperature: Ambient +10 °C to 135 °CTemperature Stability: ±0.07°CPump: 1-speedPump Pressure (max.): 1,8 psi (0,12 bar)External Circulation: Closed loop
Heated circulating baths with stainless steel tank Optima™ TXF200-ST series
For sophisticated applications requiring complex programming and ultra-precise temperature control in a setting range from -15 to 200 °C.Powerful integral pump for external fluid circulationLarge, bright full colour display with a choice of 5 languages5 point user calibrationLow-liquid detection (float switch)Memory capacity for 10 programs with 100 segmentsScope of supply: Thermostat, bridge plate, stainless steel tankFor cooling below ambient temperature, please order cooler separately.
Heated circulating baths with stainless steel tank Optima™ TX150-ST series
For excellent temperature stability and temperature control for demanding applications in a setting range from -15 to 150 °C.Powerful integral pump for external fluid circulationLarge, bright full colour display with a choice of 5 languages5 point user calibrationLow-liquid detection (float switch)Easy to program via interface or remotely via PC / Laptop with Labwise® softwareScope of supply: Thermostat, bridge plate, stainless steel tankFor cooling below ambient temperature, please order cooler separately.
Heated Circulating Baths with Standard Digital (SD) Temperature Controller
The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.Reservoir sizes ranging from 7 liters to 75 liters Pressure and suction pump (selected models)LidDock™ lid holderDuraTop™, precision-molded phenolic bath top resists laboratory chemicalsWhisperCool® Environmental Control SystemCool Command™ refrigeration systemWashable air filterLarge bath opening and drainEasy hook-up of fluid connectionsIntuitive setup and operation, featuring multi-language help and screen promptsSimplified setup and maintenanceOver-temperature protectionSafety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)Working Temperature: Ambient +10° to 170 °CTemperature Stability: ±0.04 °CLarge, universal icon and English displaySwivel 180™ Rotating ControllerPressure Pump with two speedsPump pressure max. 2.9 psi (0.20 bar)On-board connectivity: RS-232 serial outputOn-screen promptsAutomatic performance optimizationSingle-point calibration capability
Heating bath circulator CORIO™ CD-BT, with transparent bath tank
Heating bath circulator for internal and external temperature applications with transparent bath tank and pump connections.Bright, white, easy to read displayVery quietPump change-over between internal and external circulationUSB connectionClass III (FL) according to DIN 12876-1
Heating bath circulator ECO ET Gold, with polycarbonate bath tank
Thermostatic bath circulator with latest microprocessor technology. With individual setting of the internal and external circulation, even during operation. Separate setting for overtemperature protection and individual limiting of working temperature range.User friendly menu navigation in plain languageSafety class III for operation with flammable and non-flammable liquidsPump with 6 adjustable performance levelsCooling coil as standardUSB interface as standardUpgradeable with Pt 100/LiBus module for external control and remote control via Command consoleUpgradeable with an interface module (analogue module, contact module, RS 232/485 module, Profibus, Ethernet-USB module)Coloured TFT display for simultaneous indication of actual and set values and graphic illustration of the temperature profileProgrammer with 150 temperature/time segments that can be separated into 5 programsStainless steel pump connectors (M16x1 thread)
Heating bath circulator ECO ET Silver, with polycarbonate bath tank
Thermostatic bath circulator with latest microprocessor technology. With individual setting of the internal and external circulation, even during operation. Separate setting for overtemperature protection and individual limiting of working temperature range.User friendly menu navigation in plain languageSafety class III for operation with flammable and non-flammable liquidsPump with 6 adjustable performance levelsCooling coil as standardUSB interface as standardUpgradeable with Pt 100/LiBus module for external control and remote control via Command consoleUpgradeable with an interface module (analogue module, contact module, RS 232/485 module, Profibus, Ethernet-USB module)Monochrome grafic LCD display for simultaneous indication of actual and set valueIntegrated programmer, 1 programme with max. 20 segmentsPlastic pump connectors (13 mm olive)
Heating bath circulator, CORIO™ CD-B, with stainless steel bath tank
Heating bath circulator for internal and external temperature applications with stainless steel bath tank and pump connections.Bright, white, easy to read displayVery quietPump change-over between internal and external circulationUSB connectionIntegrated drain screw (except for B5)Class III (FL) according to DIN 12876-1
Heating bath circulators
Heating bath circulators are suitable for temperatures up to 200 °C or 300 °C depending on model. The Compatible Control models have a continuously variable pressure and suction pump. The pump pressure can be controlled with an optional pressure sensor, and so can protect your valuable glass-ware from breakage. The machines are preferred and used for temperature control of externally connected applications. Additionally there is the ability to control the temperature of objects placed directly in the open bath.Temperature control range CC-205B / KISS-205B: CC-304B / CC-308B / CC-315B: (20) 45 ... 200°C 28 ... 300°CSafety class:FL, IIIStability to DIN 12876 CC-205B / CC-304B / CC-308B / CC-315B: KISS-205B: 0.02K 0.05K*using displacement insert
Heating bath circulators CORIO™ C-B, with stainless steel bath tanks
Heating bath circulators for internal temperature applications with stainless steel bath tanks for working temperatures from 20 °C to 100 °C, complete set with bath tanks.For internal applicationsBright, white, easy to read displayWhisper quietIntegrated drain screw (except for B5)
Heating bath circulators CORIO™ C-BT, with transparent bath tanks
Heating bath circulators for internal temperature applications with transparent bath tanks for working temperatures from 20 °C to 100 °C.For internal applicationsBright, white, easy to read displayWhisper quiet
Heating bath circulators SAHARA, with PPO bath tanks
These polyphenylene oxide baths are a good alternative to stainless steel baths. The circulators can be mounted on all four sides of the bath for easy reading. The SC 100 controller is equipped with 3 languages, audible and visual alarms and 5 user-definable programs. Two pump speeds allow the flow rate of the water to be adjusted to avoid turbulence.RobustCorrosion-resistantIntuitive user interfaceBright displayCirculators are freely rotatableScope of delivery: Circulators with PPO bath tanks, connection cable, bath bridge with seal and wing screws, fittings, terminals, pump plugs for external circulation, 1.8 m power cable.Specifications:SC 100-S5P // SC 100-S14PTemperature range:13 °C … 100 °CCapacity:5 l // 14 lWeight:5.1 kg // 6.3 kgWidth:190 mm // 358 mmDepth:388 mm // 452 mmHeight:360 mm // 361 mmPower supply:230 V / 50 Hz
Heating circulator bath DYNEO™ DD-BC
For internal and external applications. With powerful components and a large, easy-to-read coloured TFT display. Operation is simple and intuitive via the central controller on the front of the device.Easy switching between internal and external circulationIntegrated cooling coil for counter-coolingBuilt-in drain tapIntegrated programmer for 8 x 60 program stepsContinuously adjustable, powerful pressure pumpPump connections M16 x 1 (outer thread)USB interfaceExternal Pt100 sensor connectionHigh-quality bath tanks made of stainless steelClass III (FL) acc. to DIN 12876-12 hose connectors for 8 and 12 mm I.W. and bath lid included.For internal and external applications. With powerful components and a large, easy-to-read coloured TFT display. Operation is simple and intuitive via the central controller on the front of the device.Easy switching between internal and external circulationIntegrated cooling coil for counter-coolingBuilt-in drain tapIntegrated programmer for 8 x 60 program stepsContinuously adjustable, powerful pressure pumpPump connections M16 x 1 (outer thread)USB interfaceExternal Pt100 sensor connectionHigh-quality bath tanks made of stainless steelClass III (FL) acc. to DIN 12876-12 hose connectors for 8 and 12 mm I.W. and bath lid included.