Climatic Test Chamber CTC256
Simulate the perfect atmosphere for climate and temperature tests, specifically in accordance with DIN EN 60068-2-1, 2-2 and 2-3. Provide unlimited flexibility for controlled material and function tests as well as ageing tests.Ventilation and Control: high-performance air fan in working chamberdepending on operation status automatically variable fan speed with manual adjustment from 10 % to 100 %adaptive, fuzzy-supported multifunctional digital microprocessor PID-controllerautodiagnostic system with fault indication on temperature and humidity control2 x Class A, 4-wire circuit, Pt100 sensors, mutually monitoring and maintaining performance at the same temperature valuedigital 7-day-programme-timer with real time clock, precise minute settingintegral timer for heating profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hoursdigital display (LED) of all set parameters, such as temperature, weekdays, time, humidity and set-up values - language to be chosen in setupdigital display of set values (resolution: 0.1 °C below 99.9 °C, 0.5 °C above 100 °C) and actual values (resolution: 0.1 °C) of temperature (LED)long-term documenting (ring store) of all relevant data, GLP-conforming as data logger - 1024 kBprogramme stored on power failureparallel printer interface (incl. real-time clock with date function) for all PCL3-compatible ink-jet printers for GLP-conforming documentationUSB interface including Memmert "Celsius" software for programming and documentationchip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)incl. works calibration certificate for -20 °C and 160 °CHeating concept: high-performance ring heaters with optimised air circulationdoor heating to avoid condensateCooling Concept:twin compressorspeed adjustable condenser fanrefrigerant R449AMultiple Overtemperature Protection:with audible and visual alarm in case of over-/undertemperature and over-/under-humidity, open door and empty water tankindependently working, digitally adjustable electronic overtemperature controller, TWW protection class 3.3additional adjustable Auto-Safety-Function "ASF" for over- and undertemperature automatically following the set value at a preset tolerance rangemechanical temperature limiter TB class 1 switching the heating off at approx.10 °C above max. oven temperatureStandards for CTC additionally:Electronically controlled active humidification and dehumidification from 10 % to 98 % rh with digital display of the relative humidity, display resolution 0.5 %, setting accuracy 1 %incl. works calibration certificate for 30 °C at 60 % rhHumidity supply with distilled water from 2 x 10 l tanks on integrated telescopic slide, with automatic water tank change-over2 x 10 l tanks acting as condensate collectors, on telescopic slide mounts
Clip plate for volumetric flasks
Clip plate made of metal for holding volumetric flasks. The clip plate can be attached to the magnetic platform.
Clip plates for tubes
Clip plates made of metal for holding different tubes. The clip plates can be attached to the magnetic platform.
CO2 incubator ICO
The CO2 incubator is ideal for biosynthesis as well as the cultivation of cells, bacteria, and tissues in the laboratory. Thanks to turbulence-free chamber ventilation, a consistently homogeneous atmosphere is ensured.User-friendly, intuitive operating conceptControlCOCKPIT: TwinDISPLAY with 2 high-definition TFT colour displaysUSB and Ethernet interfaceSterilisation of the interior including all installations and sensors at 180 °C in 60 minutesMultifunctional all-round heating with additional door and rear wall heatingFail-safe FDA-compliant data loggingVisual and acoustic alarm as well as alarm notification when individually adjustable corridors are exceededRounded corners enable easy and thorough cleaning of the interior
CO2 Incubator Midi 40 with small volume
The Thermo Scientific Midi 40 CO2 incubator is designed specifically for cell culture scientists who require a compact culturing workspace to handle small workloads, perform personal use applications, or simply address limited space environments. With its 1.4 cu ft (40 l) capacity, the Midi 40 adds a new dimension to the Thermo Scientific portfolio of leading CO2 incubation solutions. It delivers the performance and capabilities of full-sized incubators in a space-saving footprint, ideal for those who wish to avoid shared-use environments that can present potential contamination risk through unnecessary sample handling and repeated door openings. Easy to operate and economical to own, the fully featured Midi 40 offers remarkable value in a small footprint.Advanced IntrLogic™ II microprocessor: bright digital display and intuitive touchpad for simplified entry of temperature, CO2 and alarm data, with keyed setpoint switch to prevent unauthorised changes to your operating parameters.Stainless steel culture chamber: seamless, non-corrosive and exceptionally easy to clean. The Midi 40 is provided with four removable shelves.Highly efficient direct heating design: provides even heat distribution to all sides of the chamber, for accurate control with uniformity of +/- 0.1 °C.Precise and reliable CO2 control: featuring accurate thermal conductivity sensor located directly in the chamber, ensuring responsive control and long service life.Removable water reservoir: generates relative humidity values up to 95 % with rapid recovery rates that promote optimal cell growth.Heated inner glass door: provides sample security while preventing unwanted condensation.Convenient data communication: RS-485 signal output is standard, in addition to audible and visual alarm functions to ensure proper operations.
CO2 incubator, BBD 6220
BBD 6220 provides stable growth conditions and a high degree of security and protection against contamination. Typical applications are for IVF or pathogenic work. Range: ambient + 5 °C to 50 °C, humidity greater than 95 % R.H. and CO2 concentrations between 0 and 20 % Vol are reliably achieved via a microprocessor controlled measuring and control system. An automatic disinfection routine at 180 °C, which safely eliminates bacteria, fungi and spores, decontaminates the entire interior space including the sensors and fittings. The humidity water reservoir is located outside the chamber. The water is sterilised before it is used for humidification. The stainless steel chamber is crevice-free with rounded corners for easy cleaning. Includes "Heraeus CO2 Autozero System" overtemperature protection with separate probe and RS232 interface.
CO2 incubators CB
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactHumidification system with condensation protectionTouchscreen controllerFail-safe CO2 system for protecting the pH of cell cultures
CO2 incubators CB-O, with O2 control
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactHumidification system with condensation protectionTouchscreen controllerFail-safe CO2 system for protecting the pH of cell cultures
CO2 incubators CB-S
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactHumidification system with condensation protectionPID controller with LCD display
CO2 incubators CBF, with humidity control
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactContamination-safe humidification system without water panTouchscreen controllerFail-safe CO2 system for protecting the pH of cell cultures
CO2 incubators CBF-O, with humidity and O2 control
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactContamination-safe humidification system without water panTouchscreen controllerFail-safe CO2 system for protecting the pH of cell cultures
CO2 incubators CBF-OZ, with cell therapy compartmentalization, humidity and O2 control
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactContamination-safe humidification system without water panTouchscreen controllerFail-safe CO2 system for protecting the pH of cell culturesInner door divided into 8 parts with cell therapy compartmentalizationStainless steel inner door with 8 separate glass doors4 shelf levels with 8 insertsIndividual inserts can be pulled out completelyEach level is physically separated by an additional partition wall
CO2 Incubators CelCulture® with copper interior/air jacket and ULPA filter
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.Fast and uniform temperature and CO2Capacitive humidity sensorIR CO2-sensor with automatic auto zeroQuick recovery time for temperature, CO2 and humidity after door openingStainless steel 1.4301 (AISI 304) or copper interiorEasy to clean due to removable lids and inner doorSerial RS485 communication portLow maintenanceStackableOptions on request:Additional shelves, stacking kits, rollerbase, chart recorderULPA filtration system with internal blower90 °C moist heat decon system
CO2 Incubators CelCulture® with high heat sterilization and ULPA filter
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.Fast and uniform temperature and CO2Capacitive humidity sensorIR CO2-sensor with automatic auto zeroQuick recovery time for temperature, CO2 and humidity after door openingStainless steel 1.4301 (AISI 304) or copper interiorEasy to clean due to removable lids and inner doorSerial RS485 communication portLow maintenanceStackableOptions on request:Additional shelves, stacking kits, rollerbase, chart recorderIncubator with 180 °C high heat sterilization cycle, for efficient contamination protection. Conforms to the international standards for dry heat sterilization.Heat-resistant sensorsIR CO2 sensorULPA filtration system with internal blower2 MB built-in flash memory for data and event logging
CO2 Incubators CelCulture® with high heat sterilization, ULPA filter and O2 control
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.Fast and uniform temperature and CO2Capacitive humidity sensorIR CO2-sensor with automatic auto zeroQuick recovery time for temperature, CO2 and humidity after door openingStainless steel 1.4301 (AISI 304) or copper interiorEasy to clean due to removable lids and inner doorSerial RS485 communication portLow maintenanceStackableOptions on request:Additional shelves, stacking kits, rollerbase, chart recorderIncubator with 180 °C high heat sterilization cycle, for efficient contamination protection. Conforms to the international standards for dry heat sterilization.Heat-resistant sensorsIR CO2 sensorO2 SensorULPA filtration system with internal blower2 MB built-in flash memory for data and event logging
CO2 Incubators CelCulture® with high heat sterilization, without ULPA filter
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.Fast and uniform temperature and CO2Capacitive humidity sensorIR CO2-sensor with automatic auto zeroQuick recovery time for temperature, CO2 and humidity after door openingStainless steel 1.4301 (AISI 304) or copper interiorEasy to clean due to removable lids and inner doorSerial RS485 communication portLow maintenanceStackableOptions on request:Additional shelves, stacking kits, rollerbase, chart recorderIncubator with 180 °C high heat sterilization cycle, for efficient contamination protection. Conforms to the international standards for dry heat sterilization.Heat-resistant sensorsIR CO2 sensor2 MB built-in flash memory for data and event logging
CO2 Incubators CelCulture® with high heat sterilization, without ULPA filter, with O2 control
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.Fast and uniform temperature and CO2Capacitive humidity sensorIR CO2-sensor with automatic auto zeroQuick recovery time for temperature, CO2 and humidity after door openingStainless steel 1.4301 (AISI 304) or copper interiorEasy to clean due to removable lids and inner doorSerial RS485 communication portLow maintenanceStackableOptions on request:Additional shelves, stacking kits, rollerbase, chart recorderIncubator with 180 °C high heat sterilization cycle, for efficient contamination protection. Conforms to the international standards for dry heat sterilization.Heat-resistant sensorsIR CO2 sensorO2 Sensor2 MB built-in flash memory for data and event logging
CO2 Incubators CelCulture® with stainless steel interior/air jacket and ULPA filter
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.Fast and uniform temperature and CO2Capacitive humidity sensorIR CO2-sensor with automatic auto zeroQuick recovery time for temperature, CO2 and humidity after door openingStainless steel 1.4301 (AISI 304) or copper interiorEasy to clean due to removable lids and inner doorSerial RS485 communication portLow maintenanceStackableOptions on request:Additional shelves, stacking kits, rollerbase, chart recorderULPA filtration system with internal blower 90 °C moist heat decon system
CO2 Incubators CelCulture® with stainless steel interior/air jacket, without ULPA filter
The CelCulture® CO2 incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.Fast and uniform temperature and CO2Capacitive humidity sensorIR CO2-sensor with automatic auto zeroQuick recovery time for temperature, CO2 and humidity after door openingStainless steel 1.4301 (AISI 304) or copper interiorEasy to clean due to removable lids and inner doorSerial RS485 communication portLow maintenanceStackableOptions on request:Additional shelves, stacking kits, rollerbase, chart recorder90 °C moist heat decon system
CO2 incubators Heracell™ VIOS 160i, dual chamber, IR-CO2 sensor
Air jacket temperature controlled incubator for cell and tissue cultures with unique THRIVE™ airflow system for fast recovery times and optimal growth conditions.Cleanroom class ISO 5 through HEPA filtrationHigh-temperature sterilization cycle Steri-Run™ at 180 °C (duration < 12 hours) simplifies cleaning and enables uniform sterilization of all chamber surfacesIntegrated water reservoir with protective cover for max. relative humidity without condensate formationEasy filling and emptying of the water reservoir without removing shelvesBright LED display with iCAN™ touch screen simplifies monitoring and control of all incubation parameters and user actions thanks to intuitive menu navigationProgrammable access code provides additional securityLanguage selection facilitates operation: English, German, Spanish, French, Italian, Japanese, MandarinStandard equipment: Auto-start calibration, water level alarm, USB interface, potential-free alarm contact, feed-through (Ø 42 mm) with silicone plug, three-part inner door, 3 shelvesStacking adapter and base with castors includedThe specified values refer to one chamber.
CO2 incubators Heracell™ VIOS 160i, dual chamber, TC-CO2 sensor
Air jacket temperature controlled incubator for cell and tissue cultures with unique THRIVE™ airflow system for fast recovery times and optimal growth conditions.Cleanroom class ISO 5 through HEPA filtrationHigh-temperature sterilization cycle Steri-Run™ at 180 °C (duration < 12 hours) simplifies cleaning and enables uniform sterilization of all chamber surfacesIntegrated water reservoir with protective cover for max. relative humidity without condensate formationEasy filling and emptying of the water reservoir without removing shelvesBright LED display with iCAN™ touch screen simplifies monitoring and control of all incubation parameters and user actions thanks to intuitive menu navigationProgrammable access code provides additional securityLanguage selection facilitates operation: English, German, Spanish, French, Italian, Japanese, MandarinStandard equipment: Auto-start calibration, water level alarm, USB interface, potential-free alarm contact, feed-through (Ø 42 mm) with silicone plug, three-part inner door, 3 shelvesStacking adapter and base with castors includedThe specified values refer to one chamber.
CO2 incubators Heracell™ VIOS 160i, single chamber, IR-CO2 sensor
Air jacket temperature controlled incubator for cell and tissue cultures with unique THRIVE™ airflow system for fast recovery times and optimal growth conditions.Cleanroom class ISO 5 through HEPA filtrationHigh-temperature sterilization cycle Steri-Run™ at 180 °C (duration < 12 hours) simplifies cleaning and enables uniform sterilization of all chamber surfacesIntegrated water reservoir with protective cover for max. relative humidity without condensate formationEasy filling and emptying of the water reservoir without removing shelvesBright LED display with iCAN™ touch screen simplifies monitoring and control of all incubation parameters and user actions thanks to intuitive menu navigationProgrammable access code provides additional securityLanguage selection facilitates operation: English, German, Spanish, French, Italian, Japanese, MandarinStandard equipment: Auto-start calibration, water level alarm, USB interface, potential-free alarm contact, feed-through (Ø 42 mm) with silicone plug, three-part inner door, 3 shelvesAir jacket temperature controlled incubator for cell and tissue cultures with unique THRIVE™ airflow system for fast recovery times and optimal growth conditions.Cleanroom class ISO 5 through HEPA filtrationHigh-temperature sterilization cycle Steri-Run™ at 180 °C (duration < 12 hours) simplifies cleaning and enables uniform sterilization of all chamber surfacesIntegrated water reservoir with protective cover for max. relative humidity without condensate formationEasy filling and emptying of the water reservoir without removing shelvesBright LED display with iCAN™ touch screen simplifies monitoring and control of all incubation parameters and user actions thanks to intuitive menu navigationProgrammable access code provides additional securityLanguage selection facilitates operation: English, German, Spanish, French, Italian, Japanese, MandarinStandard equipment: Auto-start calibration, water level alarm, USB interface, potential-free alarm contact, feed-through (Ø 42 mm) with silicone plug, three-part inner door, 3 shelves
CO2 incubators Heracell™ VIOS 160i, single chamber, TC-CO2 sensor
Air jacket temperature controlled incubator for cell and tissue cultures with unique THRIVE™ airflow system for fast recovery times and optimal growth conditions.Cleanroom class ISO 5 through HEPA filtrationHigh-temperature sterilization cycle Steri-Run™ at 180 °C (duration < 12 hours) simplifies cleaning and enables uniform sterilization of all chamber surfacesIntegrated water reservoir with protective cover for max. relative humidity without condensate formationEasy filling and emptying of the water reservoir without removing shelvesBright LED display with iCAN™ touch screen simplifies monitoring and control of all incubation parameters and user actions thanks to intuitive menu navigationProgrammable access code provides additional securityLanguage selection facilitates operation: English, German, Spanish, French, Italian, Japanese, MandarinStandard equipment: Auto-start calibration, water level alarm, USB interface, potential-free alarm contact, feed-through (Ø 42 mm) with silicone plug, three-part inner door, 3 shelvesAir jacket temperature controlled incubator for cell and tissue cultures with unique THRIVE™ airflow system for fast recovery times and optimal growth conditions.Cleanroom class ISO 5 through HEPA filtrationHigh-temperature sterilization cycle Steri-Run™ at 180 °C (duration < 12 hours) simplifies cleaning and enables uniform sterilization of all chamber surfacesIntegrated water reservoir with protective cover for max. relative humidity without condensate formationEasy filling and emptying of the water reservoir without removing shelvesBright LED display with iCAN™ touch screen simplifies monitoring and control of all incubation parameters and user actions thanks to intuitive menu navigationProgrammable access code provides additional securityLanguage selection facilitates operation: English, German, Spanish, French, Italian, Japanese, MandarinStandard equipment: Auto-start calibration, water level alarm, USB interface, potential-free alarm contact, feed-through (Ø 42 mm) with silicone plug, three-part inner door, 3 shelves
CO2 Incubators ICOmed
The CO2 incubator ICOmed is the perfect solution: Thanks to the battery-buffered ControlCOCKPIT, the operating display, logging and CO2 control remain fully functional even when there is a power failure. All parameters are logged in accordance with the FDA and, when individually adjusted ranges for CO2, O2, temperature and humidity are exceeded, notifications can be sent to a mobile phone in addition to an alarm. With its rounded corners, the interior is easy to clean and can be sterilised for 60 minutes at 180 °C (including all sensors). The active humidity control offers optimal protection for cell and tissue cultures. It minimizes evaporation in the interior and ensures short recovery times. Every Memmert CO2 incubator ICOmed is a medical device of class IIa according to MDD 93/42/EEC until 26 May 2024 according to the transitional provisions by the (EU) 2017/745 article 120 (2).fully insulated stainless steel door and heated inner glass doorModel variant TwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
CO2 Incubators with Chambers Heracell™ 150i/240i
Protect valuable samples while optimizing cell growth. CO2 incubators with stainless steel or copper chambers provide the ideal in-vitro environment. Clean, reliable and easy to use, they feature fast recovery characteristics and a convenient touchscreen user-interface.
Collecting Pans for Muffle and Ashing Furnaces
Ceramic collecting pans for temperatures up to max. 1300 °C, steel collecting pans for temperatures up to max. 1100 °C.
Compact vacuum oven Vacutherm™ VT 6025
For the gentle and rapid drying or heat treatment of temperature sensitive substances and components in the electronics, pharmacy, cosmetics and biochemistry fields. With double glazed safety glass door window, very low external casing temperature, freely adjustable overheat cut-out with separate temperature sensor, Kelvitron® microprocessor controlled temperature controller and pull-out, non-tilting shelves with end stops.For the gentle and rapid drying or heat treatment of temperature sensitive substances and components in the electronics, pharmacy, cosmetics and biochemistry fields. With double glazed safety glass door window, very low external casing temperature, freely adjustable overheat cut-out with separate temperature sensor, Kelvitron® microprocessor controlled temperature controller and pull-out, non-tilting shelves with end stops.
Compact vacuum oven Vacutherm™ VT 6025, with inert gas connection
For the gentle and rapid drying or heat treatment of temperature sensitive substances and components in the electronics, pharmacy, cosmetics and biochemistry fields. With double glazed safety glass door window, very low external casing temperature, freely adjustable overheat cut-out with separate temperature sensor, Kelvitron® microprocessor controlled temperature controller and pull-out, non-tilting shelves with end stops.With stainless steel vacuum ball valve, inert gas connection, overpressure safety and precision valve, seamlessly welded chamber, and DN25 access port
Compact vacuum oven Vacutherm™ VT 6025, with inert gas connection, digital pressure display, and recorder connection
For the gentle and rapid drying or heat treatment of temperature sensitive substances and components in the electronics, pharmacy, cosmetics and biochemistry fields. With double glazed safety glass door window, very low external casing temperature, freely adjustable overheat cut-out with separate temperature sensor, Kelvitron® microprocessor controlled temperature controller and pull-out, non-tilting shelves with end stops.With stainless steel vacuum ball valve, inert gas connection, digital pressure display, recorder connection, overpressure safety and precision valve, seamlessly welded chamber, and DN25 access port
Constant climate chamber KBF PRO
The constant climate chambers of the KBF PRO series are equipped with APT.line™ preheating chamber technology and a wide temperature and humidity range, making them suitable for all types of material testing. The humidity range is controlled by means of a capacitive humidity sensor and responsive steam humidification. The constant climate chambers are equipped with proven compressor technology to ensure reliable and failsafe long-term operation. Thanks to the modern inverter cooling unit and the climate-neutral refrigerant R-290, energy-efficient and environmentally friendly cooling is guaranteed. The inner chamber and the two racks with telescopic rails are made of stainless steel, while the inner doors are made of metal oxide-coated safety glass.Adjustable fan speedDoor heating to prevent condensationIntuitive touchscreen controller with time-segment and real-time programmingErgonomically adjustable control terminal (for models from 470 l volume)Signal triangle with light-up status display (for models with a volume of 470 l or more) Internal data logger, measured values can be read out in open format via USB interfaceEthernet interfaceBINDER Multi Management Software APT-COM™ Basic EditionDevice self-test for comprehensive status analysisClass 3.3 independent temperature safety device (DIN 12880) with visual and acoustic alarmTable-top device KBF PRO 130 is stackableFloor-standing devices with robust twin casters with brakes at the frontModels 260, 470 and 720 can be optionally equipped with light modules for ICH photostability tests. With optional LED light modules, the KBF PRO models from 260 upwards become a plant growth cabinet. Please order light modules separately.
Constant climate chamber KBF, white
The constant climate chambers of the KBF series are equipped with APT.line™ preheating chamber technology and a large temperature and humidity range. The KBF fulfills all important ICH requirements and, with its high climate homogeneity, ensures reliable ICH stability tests in the pharmaceutical industry. The humidity range is controlled by means of a capacitive humidity sensor and responsive steam humidification. The constant climate chambers are equipped with proven compressor technology to ensure reliable and failsafe long-term operation. Thanks to the modern inverter cooling unit and the climate-neutral refrigerant R-600a, energy-efficient and environmentally friendly cooling is guaranteed. The inner chamber and the two racks are made of stainless steel, while the inner doors are made of metal oxide-coated safety glass.Adjustable fan speedDoor heating to prevent condensationIntuitive touchscreen controller with time-segment and real-time programmingErgonomically adjustable control terminal (for models from 470 l volume)Signal triangle with light-up status display (for models with a volume of 470 l or more)Internal data logger, measured values can be read out in open format via USB interfaceEthernet interfaceBINDER Multi Management Software APT-COM™ Basic EditionDevice self-test for comprehensive status analysisClass 3.3 independent temperature safety device (DIN 12880) with visual and acoustic alarmTable-top device KBF 130 is stackableFloor-standing devices with robust twin casters with brakes at the frontModels 260, 470 and 720 can be optionally equipped with light modules for ICH photostability tests. With optional LED light modules, the KBF models from 260 upwards become a plant growth cabinet. Please order light modules separately.
Constant Climate Chambers HPPeco
Thanks to unbeatable energy efficiency and low-maintenance operation, the HPPeco constant climate chambers are perfectly suited for stability tests, environmental testing and materials testing. The high precision temperature control as well as the active humidification and dehumidification were particularly adapted to the ICH guidelines, option Q1A, for stability tests.LED light module for sizes 110 to 750 (as an option): dimmable LED light in three alternative colour temperatures (cold white light, warm white light or cold white and warm white light, dimmable in steps of 1 %)Heating and cooling seamlessly with one system thanks to Peltier technology. Almost vibration-free and extremely quietTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Constant climate chambers KBF-S ECO
Constant climate chambers for long-term tests and accelerated stability tests of pharmaceutical products according to the ICH guideline Q1A. Particularly energy-efficient and low-noise thanks to Peltier technology with patented heat dissipation.Homogeneous climate even with full loadElectronically controlled APT.line™ preheating chamber technologyTemperatures up to 28 °C below ambient temperature possibleInner chamber made completely of stainless steel2 stainless steel grids incl. shelf supportAccess port with silicone plug Ø 30 mm, left sideUnit self-test for comprehensive status analysisLCD display for indication of temperature, humidity, alarms and additional informationInternal data logger with USB interfaceIndependent water supply via canisters
Contact thermometers, accessory relay TST-tr
With Schuko power output socket and discrete control circuit. Plastic housing insulated to VDE. Automatic on/off switch. Will not function unless a contact thermometer is plugged in. Switch status display. Dimensions (W x D x H) 120mm x 80mm x 85mm. Switching capacity 220V 10A.
Cooled incubator FOC IL, with transparent inner door and illuminated shelves
Versatile cooled incubators with auto-tuning temperature control system for optimal temperature stability. With the optional Software TEMPSoft™, times, temperatures, ramps, and alarm thresholds can be set.2 internal sockets for further devicesWireless (WI-FI) and wired data transmission (RS485)Front 3 button panel (Set, "+", "-")Forced ventilation for uniform temperature distributionEco-friendly cooling system2 of 3 shelves are equipped with LED light strips (30000 LUX/shelf)Timer for adjustable lighting cycles
Cooled incubator FTC 120
Cooled incubator with class A+ energy efficiency. Especially designed for BOD measurements.Fixed temperature of 20 °C.For up to 3 x BOD sensor system 6 bottles or 2 x BOD sensor system 10 bottles2 internal sockets for further devicesForced ventilation for uniform temperature distribution2-digit display for indoor temperatureHigh efficiency, low operating costsScope of supply: Cooled incubator, 2 shelves