Benchtop shaking incubator Genie Temp-Shaker 300, with adhesive mat
For shaking and incubation of samples. The incubation chamber can be opened from 3 sides and tilted to the side to load the platform or take samples.Removable incubation chamberVery good temperature distributionMinimum temperature loss when opening the chamberThe maximum working temperature of 75 °C is reached in 20 minutesTransparent incubation chamberFlat platform with adhesive rubber mat that is perfect for use with open containers. Patented material is naturally adhesive. The adhesive properties can be renewed by rinsing.
Block Heaters, analogue and digital, BH-200 series
choice of either analogue or digital modelsdigital models available with either 130 or 200 °C maximum temperaturethree block model for extra capacitydual control models have two blocks with independent temperature controluniform and stable block temperaturesDesigned for the precise heating of test-tubes, microcentrifuge tubes, cuvettes and microplates.Range compromises an economical analogue model with easy to use, dial setting and advanced digital models with bright, easy to read, LED display which facilitates setting of the required temperature and also accurate monitoring of the actual temperature.Excellent temperature stability and uniformity is maintained via sensitive, microprocessor control.Heats to 100°C in <12 mins.Supplied complete with block extraction tool but without aluminium blocks which must be ordered separately.With BioCote, silver-based, antimicrobial protection.SpecificationsTemperature stability at 37°C:± 0.1°CUniformity within block at 37°C:± 0.1°CUniformity within block at 130°C:± 1°CElectrical supply:230V 50Hz Number of blocks: Temperature range : Display type: Display resolution: Dimensions (W x D x H) mm: Net weight: Heater power:BH200-2 // BH-200D-2 // BH-200D-2-HT 2 Amb.+8°C to +130°C // Amb.+8°C to +130°C // Amb.+8°C to +200°C Calibrated knob // LED // LED 10°C // 0,1°C // 0,1°C 235 x 280 x 115mm 2.1kg // 2.3kg // 2.3kg 300W Number of blocks: Temperature range: Display type: Display resolution: Dimensions (W x D x H) mm: Net weight: Heater power:BH-200D-3 // BH-200D-3-HT 3 Amb.+8°C to +130°C // Amb.+8°C to +200°C LED 0,1°C 310 x 280 x 115mm 3.2kg 450W Number of blocks: Temperature range: Display type: Display resolution: Dimensions (W x D x H) mm: Net weight: Heater power:BH-200DC-2 // BH-200DC-2-HT 2 (independent control) Amb.+8°C to +130°C // +50°C to +200°C LED 0,1°C 310 x 280 x 115mm 2.9kg 300W
Block thermostat CH3-150 Combitherm-2
Block thermostat with cooling and heating function and with 2 independent modules for interchangeable blocks, combined in a single unit. Control panel is divided in two parts for separate control of cooling and heating blocks.Digital temperature control for optimum precisionDigital timer with sound alarmUser adjustable programs for temperature and time: 16 heating programs and 16 cooling programsTemperature Calibration FunctionWith protective lidSpecificationsTemperature range heating / cooling:25 ... 150 °C / -3 ... 20 °CTemperature control range heating / cooling:ambient +5 ... 150 °C / ambient -23 ... ambient +5 °CTemperature uniformity: Temperature accuracy:±0.1 °C 0.1 °CTimer:1 min ... 99 h 59 minDimensions (W x D x H):295 x 285 x 220 mmWeight:5.6 kgPower supply:230 V, 50/60 Hz
Block thermostats BT5D
The block thermostat BT5D is suitable for high temperature applications where the use of a bath is not desired. It allows temperature control without fluids and thus reduces the risk of contamination.Digital controllerTimer or continuous operationLED temperature displayEasy, interactive user interfaceAdjustable over-temperature cut-outRaised feet to protect the work surface from high temperaturesTemperature range:Amb. + 10 °C ... 400 °CTemperature stability:±0.5 °C (up to 300 °C)Temperature uniformity:±1 %Timer:1 ... 9999 minDimensions (W x D x H):205 x 420 x 145 mmWeight:7.5 kgPower rating:750 WPower supply:230 V, 50/60 Hz
Block thermostats PCH-1 / PCH-2 / PCH-3
Personal benchtop cooling/heating dry block for microcentrifuge tubes. The ingenious block construction, combined with the powerful Peltier module, produces very rapid cooling and heating.Temperature range:-10 to +100°CHeat up, amb. to 100°C:15 minCool down, 100°C to amb.:15 minCool down, amb. to -10°C:21 min
Block thermostats, QBD, QBH series, accessory covers
Not required with QDP-FL mictrotiter blocks
Block thermostats,QBD and QBH series
For controlled dry heating of test tubes, microplates and Eppendorf tubes in interchangeable aluminium blocks. The following models are available:Choose from 3 digital systems with 1, 2 or 4 interchangeable blocks (QBD models) and 1 digital high-temperature system (QBH2) with 2 blocksFast heat-up time and in-block temperature sensing capability using external sensor probe. Please order Cat. No. 6.228 714 separately.Built-in timer, programmable delayed start and RS232 output for data monitoringIncludes block removal toolRequires but does not include interchangeable QB-series blocksSpecificationsTemperature range:ambient 5 to 130 °C, QBH2: ambient 5 to 200 °CStability at 37 °C: Uniformity±0.1 °Cwithin the block at 37 °C: across similar blocks at 37 °C:±0.1 °C ±0.2 °CSupply requirements:230 V, 50/60 Hz, single phase
BlockThermostats TH 21 / TK 23
The Block Thermostats are used for tempering of solutions in closed reaction tubes and plates. They stand out due to their high temperature accuracy as well as their various fields of application thanks to over 30 different exchangeable blocks.Specifications Thermostats:HeatingBlock TH 21 // Heating/CoolingBlock TK 23Temperature operation range:Amb. +3°C to +130°C // Amb. -16°C to +90°CTemperature adjustable range:0°C to +137°C // -10°C to +105°CAccuracy/ resolution:±0.1°C / 0.1°C // ±0.3°C / 0.1°CMax. heating time:9.5°C / min // 4°C / minMax. cooling time:-- // 7°C / minDimensions (W x D x H):220 x 330 x 109mm // 220 x 330 x 144mmCapacity:2 exchangeable blocks (not included)Weight (with block / blocks):approx. 3.5kg // approx. 7.5kgElectrical heating/ cooling power:350W // 130WSupply requirements:230V, 50HzEasy Control // Smart Control:Timer 19h 59min // 30 program stepsFurther power connectors on request.
Bottom grid for Water baths WTB
Bottom grid reversible for 2 heights (30 mm and 60 mm)
Built-in hotplates series EB-C, CERAN®
The EB-C series is designed for table installation, and is supplied with installation suspension. The separate controller housing can be installed directly into the table frame. Electrical connections between controller housing and hotplate are protected by a flexible metal hose. Conductor length between controller housing and hotplate 0.65 m.Heated area marked on CERAN® heating surfaceNo heat loss to table top and heating surface edges
Calibration certificate Extension for Cooling incubators KB ECO
Extension of the temperature measurement in the centre of the cooling incubator by an additional test temperature.
Calibration certificates Temperature for Cooling incubators KB ECO
Temperature measurement in the cooling incubator at a specific test temperature.
Cell Culture Flasks EasyFlask™, non-treated, PS/HDPE, pyrogen-free
Non-treated, sterile flasks for suspension cell cultures. White caps for easy identification. Pyrogen-free.Material flasks: PolystyreneMaterial caps: HDPE
Cell Culture Flasks TripleFlask™, non-treated, PS/HDPE, pyrogen-free
Non-treated, sterile flasks for suspension cell cultures. White caps for easy identification. Pyrogen-free.Material flasks: PolystyreneMaterial caps: HDPE
Cell Locker™ chambers for CO2 inkubator Heracell™ VIOS™ 160i
Transparent. Each Cell Locker™ holds 9 each T-75 cell culture flasks, 20 each 6-well plates, or 24 each 96-well plates. The Cell Locker™ can be manually disinfected or can be autoclaved a maximum of 12 times.Tapered box for easy installation into incubatorEasy and secure one handed latch and pullNon-slick sliding tray with tip protectionRemovable cover for protected transportMembrane filter (0.2 µm)
Chamber furnaces
The chamber furnaces are suitable for Annealing, Hardening and Brazing. The furnaces can be extended with a variety of accessories, like annealing boxes for operation under protective gas, roller guides, or a cooling station with a quench tank. Even high-performance applications like the annealing of titanium can be implemented without the use of expensive and complicated annealing systems.Robust insulation with light refractory bricksDeep furnace chamber with three-sides heating: from both side walls and bottomLow energy consumption due to multi-layer insulationBase frame includedN 7/H - N 17/HR designed as table-top modelParallel guided downward swinging door (user protected from heat radiation)NTLog Basic for Nabertherm controller: recording of process data with USB-flash driveEquipped with the B 500 programmable controller (with touch panel, 5 programmes with 4 segments each), optionally available with the C 540 controller
Charging rack for ashing furnaces
Charging rack to load the furnace in different levels, including holders to insert and remove the trays.
Chemical membrane pump VP1
The VP1 vacuum pump, together with the VD series vacuum drying ovens, is ideally suited for drying aqueous and non-flammable solvents.Resistant to a wide range of chemicalsVery quiet and low-vibration operationDesigned for S1 operating mode (continuous operation)Suction and pressure-side separators for collecting condensate
Chemical membrane pump VP2
The VP2 vacuum pump, together with the VD series vacuum drying ovens, is ideally suited for drying aqueous and non-flammable solvents.Resistant to a wide range of chemicalsVery quiet and low-vibration operationDesigned for S1 operating mode (continuous operation)Suction and pressure-side separators for collecting condensate
Clamps for Erlenmeyer flasks for Shaking water baths Hydro
Clamps to be placed on the shaking tray.
Climate Chambers ICH C, with humidity and CO2 control
The climate chamber generation with the unique ControlCOCKPIT for a quick and intuitive operation. Unparalleled temperature and humidity homogeneity for long-term stable ambient conditions.PID microprocessor control with integrated auto-diagnostic systemInterior stainless steel 1.4301 (ASTM 304), deep-drawnStructured stainless steel housing, rear of zinc-plated steelHigh-Operation and adjustment of all parameters directly at the ControlCOCKPIT temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standardsInternal data logger with a storage capacity of at least 10 yearsGerman, English, French, Spanish language settings available on the ControlCOCKPITDigital backwards counter with target time setting adjustable between 1 minute and 99 daysThe SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamberAdjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT, for example relative humidityMoisture tight standard entry port, at the back, 40 mm inner diameter, can be closed by silicone stopperTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysAvailable parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertimeTwo Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an errorAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB portControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID functionDisplaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online loggingMultiple overtemperature protection: Electronic temperature monitoring TWW/TWB (protection class 3.3 or 2 and mechanical temperature limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN/MAX values for over/undertemperature alarmThe climate chamber generation with the unique ControlCOCKPIT for a quick and intuitive operation. Unparalleled temperature and humidity homogeneity for long-term stable ambient conditions.PID microprocessor control with integrated auto-diagnostic systemInterior stainless steel 1.4301 (ASTM 304), deep-drawnStructured stainless steel housing, rear of zinc-plated steelHigh-Operation and adjustment of all parameters directly at the ControlCOCKPIT temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standardsInternal data logger with a storage capacity of at least 10 yearsGerman, English, French, Spanish language settings available on the ControlCOCKPITDigital backwards counter with target time setting adjustable between 1 minute and 99 daysThe SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamberAdjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT, for example relative humidityMoisture tight standard entry port, at the back, 40 mm inner diameter, can be closed by silicone stopperTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysAvailable parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertimeTwo Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an errorAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB portControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID functionDisplaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online loggingMultiple overtemperature protection: Electronic temperature monitoring TWW/TWB (protection class 3.3 or 2 and mechanical temperature limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN/MAX values for over/undertemperature alarm
Climate Chambers ICH L, with humidity control and light
The climate chamber generation with the unique ControlCOCKPIT for a quick and intuitive operation. Unparalleled temperature and humidity homogeneity for long-term stable ambient conditions.PID microprocessor control with integrated auto-diagnostic systemInterior stainless steel 1.4301 (ASTM 304), deep-drawnStructured stainless steel housing, rear of zinc-plated steelHigh-Operation and adjustment of all parameters directly at the ControlCOCKPIT temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standardsInternal data logger with a storage capacity of at least 10 yearsGerman, English, French, Spanish language settings available on the ControlCOCKPITDigital backwards counter with target time setting adjustable between 1 minute and 99 daysThe SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamberAdjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT, for example relative humidityMoisture tight standard entry port, at the back, 40 mm inner diameter, can be closed by silicone stopperTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysAvailable parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertimeTwo Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an errorAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB portControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID functionDisplaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online loggingMultiple overtemperature protection: Electronic temperature monitoring TWW/TWB (protection class 3.3 or 2 and mechanical temperature limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN/MAX values for over/undertemperature alarmSpecially designed for testing pharmaceutical products according to ICH, Q1A and Q1B, option 2, and similar global standards for stability tests of cosmetics and food.
Climate Chambers ICH, with humidity control
The climate chamber generation with the unique ControlCOCKPIT for a quick and intuitive operation. Unparalleled temperature and humidity homogeneity for long-term stable ambient conditions.PID microprocessor control with integrated auto-diagnostic systemInterior stainless steel 1.4301 (ASTM 304), deep-drawnStructured stainless steel housing, rear of zinc-plated steelHigh-Operation and adjustment of all parameters directly at the ControlCOCKPIT temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standardsInternal data logger with a storage capacity of at least 10 yearsGerman, English, French, Spanish language settings available on the ControlCOCKPITDigital backwards counter with target time setting adjustable between 1 minute and 99 daysThe SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamberAdjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT, for example relative humidityMoisture tight standard entry port, at the back, 40 mm inner diameter, can be closed by silicone stopperTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysAvailable parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertimeTwo Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an errorAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB portControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID functionDisplaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online loggingMultiple overtemperature protection: Electronic temperature monitoring TWW/TWB (protection class 3.3 or 2 and mechanical temperature limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN/MAX values for over/undertemperature alarmThe climate chamber generation with the unique ControlCOCKPIT for a quick and intuitive operation. Unparalleled temperature and humidity homogeneity for long-term stable ambient conditions.PID microprocessor control with integrated auto-diagnostic systemInterior stainless steel 1.4301 (ASTM 304), deep-drawnStructured stainless steel housing, rear of zinc-plated steelHigh-Operation and adjustment of all parameters directly at the ControlCOCKPIT temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standardsInternal data logger with a storage capacity of at least 10 yearsGerman, English, French, Spanish language settings available on the ControlCOCKPITDigital backwards counter with target time setting adjustable between 1 minute and 99 daysThe SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamberAdjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT, for example relative humidityMoisture tight standard entry port, at the back, 40 mm inner diameter, can be closed by silicone stopperTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysAvailable parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertimeTwo Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an errorAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB portControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID functionDisplaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online loggingMultiple overtemperature protection: Electronic temperature monitoring TWW/TWB (protection class 3.3 or 2 and mechanical temperature limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN/MAX values for over/undertemperature alarm