Cooled incubators FOC E
Versatile cooled incubators with auto-tuning temperature control system for optimal temperature stability. With the optional Software TEMPSoft™, times, temperatures, ramps, and alarm thresholds can be set.2 internal sockets for further devicesWireless (WI-FI) and wired data transmission (RS485)Front 3 button panel (Set, "+", "-")Forced ventilation for uniform temperature distributionEco-friendly cooling systemVersatile cooled incubators with auto-tuning temperature control system for optimal temperature stability. With the optional Software TEMPSoft™, times, temperatures, ramps, and alarm thresholds can be set.2 internal sockets for further devicesWireless (WI-FI) and wired data transmission (RS485)Front 3 button panel (Set, "+", "-")Forced ventilation for uniform temperature distributionEco-friendly cooling system
Cooled incubators FOC I, with transparent inner door
Versatile cooled incubators with auto-tuning temperature control system for optimal temperature stability. With the optional Software TEMPSoft™, times, temperatures, ramps, and alarm thresholds can be set.2 internal sockets for further devicesWireless (WI-FI) and wired data transmission (RS485)Front 3 button panel (Set, "+", "-")Forced ventilation for uniform temperature distributionEco-friendly cooling systemVersatile cooled incubators with auto-tuning temperature control system for optimal temperature stability. With the optional Software TEMPSoft™, times, temperatures, ramps, and alarm thresholds can be set.2 internal sockets for further devicesWireless (WI-FI) and wired data transmission (RS485)Front 3 button panel (Set, "+", "-")Forced ventilation for uniform temperature distributionEco-friendly cooling system
Cooled incubators with compressor cooling ICP
The cooled incubators with the unique ControlCOCKPIT for a quick and intuitive operation. Ideal at temperatures around zero and below. For rapid and precise alternation between heating up and cooling down times in ramp operation. Extraordinarily quiet.Standard equipment :PID microprocessor control with integrated auto-diagnostic systemInterior stainless steel, material 1.4301 (ASTM 304) very stable and easy to cleanStructured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel (all sizes mounted on lockable castors)High-temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standardsInternal data logger with a storage capacity of at least 10 yearsGerman, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPITDigital backwards counter with target time setting adjustable between 1 minute and 99 daysThe SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamber.Adjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPITTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Cooling coil for water baths PURA™
Suitable for temperature control tasks close to ambient temperature.
Cooling incubator INC 125 FC
Ideal for microbiological applications thanks to the wide temperature range and precise temperature control. Resource and environmentally friendly thanks to powerful compressor cooling technology.Decontamination mode with 100 °CInternal air circulation can be influenced by electronically adjustable fan speedUse of the natural refrigerant R290Excellent temperature management and optimised energy consumption thanks to very good insulation of the inner chamberAdditional inner glass doorEasy cleaning of the spacious interior thanks to rounded corners and smooth surfacesDefrost function with continuous water drainage through drain openingDoor hinge on the right, can be changed on requestOptional lockable doorInstallation and operation qualification (IQ/OQ) available on requestScope of supply: Cooling incubator INC 125 FC, 2 x wire grid trays IO T 2.10, 2 x tilt protection/assembly material, USB A-B cable, calibration certificate at 37 °C and 10 °C, hose adapter (for Ø 9 to 11 mm)
Cooling incubator KB PRO
The cooling incubators of the KB PRO series are equipped with APT.line™ preheating chamber technology and an extended temperature range. With their comprehensive programming options, the cooling incubators cover a wide range of applications. They are equipped with proven compressor technology to ensure reliable and failsafe long-term operation. Thanks to the modern inverter cooling unit and the climate-neutral refrigerant R-290, energy-efficient and environmentally friendly cooling is guaranteed. The inner chamber and the two racks with telescopic rails are made of stainless steel, while the inner doors are made of metal oxide-coated safety glass.Adjustable fan speedDoor heating to prevent condensationIntuitive touchscreen controller with time-segment and real-time programmingErgonomically adjustable control terminal (for models from 470 l volume)Signal triangle with light-up status display (for models from 470 l volume)Internal data logger, measured values can be read out in open format via USB interfaceEthernet interfaceBINDER Multi Management Software APT-COM™ Basic EditionDevice self-test for comprehensive status analysisClass 3.3 independent temperature safety device (DIN 12880) with visual and acoustic alarmLarge access port with silicone plugTable-top device KB PRO 130 is stackableFloor-standing devices with robust twin casters with brakes at the frontModels 260, 470, and 720 can be optionally equipped with light modules for ICH photostability tests. With optional LED light modules, the KB PRO models from 260 upwards become a plant growth cabinet. Please order light modules separately.
Cooling incubator KB, white
The cooling incubators of the KB series feature APT.line™ preheating chamber technology and a large temperature range, making them suitable for a wide range of applications. They also feature a hot-air disinfection routine. The cooling incubators are equipped with proven compressor technology to ensure reliable and failsafe long-term operation. Thanks to the modern inverter cooling unit and the climate-neutral refrigerant R-600a, energy-efficient and environmentally friendly cooling is guaranteed. The interior and the two racks are made of stainless steel, while the inner doors are made of metal oxide-coated safety glass.Door heating to prevent condensationSimple programming of a second temperature setpointInternal data logger, measured values can be read out in open format via USB interfaceEthernet interfaceDevice self-test for comprehensive status analysisClass 3.3 independent temperature safety device (DIN 12880) with visual and acoustic alarmLarge access port with silicone plugTable-top devices are stackable (for models up to 130 l volume)Floor-standing devices with robust twin casters with brakes at the front
Cooling incubator KT
Cooling incubator with Peltier technology combines exceptional performance with low energy consumption and environmental friendliness.APT.line™ preheating chamber technologyHot air disinfection at 100 °CAdjustable fan speedController with time-segment and real-time programmingInner door made of tempered safety glass2 stainless steel racksClass 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarmComputer interface: EthernetData recording and USB interface
Cooling incubators KB ECO
Cooling incubator with environmentally friendly Peltier technology and APT.line™ preheating chamber technology for optimal incubation conditions. Ideal for applications in biotechnological, medical and pharmaceutical laboratories.Condensate and dry-out protection for all operating conditionsFail-safe operation due to intelligent thermoelectric temperature controlProgrammable temperatures for intermitted incubation and refrigerationAPT.line™ preheating chamber technologyAdjustable condensate protectionMinimal energy consumption thanks to Peltier technologyInner door made of safety glassInner chamber completely made of stainless steelInsertion grids made of stainless steelLCD display shows temperature, additional information and alarmsInternal data logger, measured values can be read out in open format via USBDevice self-test for status analysis
Cooling water relay LKR 3000
The device is used for moitoring cooling water circuits. Because of the high braking capacity thermostats and cryostats are also connectable. A reliable water flow sensor.SpecificationsPlastic housing (W x H x D):160mm x 82mm x 130mmLED indication:10mm high, greenAdjustment:min. 10 L/h up to max 250 L/hPower supply:230V / 50Hz, 16ABreaking capacity:16A/230V for consumer load, 1A/230V for magnetic valve
Cooling/Heating block Eppendorf ThermoStat C
The ideal device to accurately set and maintain temperatures. Precise temperature control is achieved using optimally balanced heating and cooling elements (peltier technology). The cooling and heating temperature keys provide quick access to five important experimental temperatures (4°C, 16°C, 37°C, 56°C and 95°C). You can also individually store 15 programs.Excellent temperature accuracyPrecise temperature control from -10 to 110°C (110°C can be set when using 12 mm and cryo SmartBlocks™)Prevent condensation and improve temperature homogeneity with the new ThermoTopComprehensive range of program functionsScope of supply: Basic device, without Eppendorf SmartBlock™
CoolingThermomixer MKR 13 / MKR 23
For cooling, heating and mixing of samples.SpecificationsMKR 13 // MKR 23Temperature operation range:Amb. -16°C to +100°C // Amb. -11°C to +70°CTemperature adjustable range:-10°C to +105°C // 0°C to +80°CAccuracy/resolution:±0.1°C / 0.1°C // ± 0.3°C / 0.1°CMax. heating time:6°C / min // 3.5°C / minMax. cooling time:12°C / min // 6.5°C / minShaking frequency:200 to 1500rpm // 200 to 1200rpmOrbit:3mm orbitalDimensions (W x D x H):220 x 330 x 144mmCapacity:1 exchangeable block // 2 exchangeable blocks (not included)Weight (with block / blocks):9kg // approx. 9.5kgElectrical heating/cooling power:130W // 200WSupply requirements:230V, 50HzSmart Control:30 program steps, short mix, interval shakingFurther power connectors on request.
Copper interior for CO2 incubator CB-S 170
Set consisting of 2 shelves (solid copper) and a water pan (copper-plated).
Diaphragm Pumps for Vacuum Ovens
Gentle drying of heat sensitive materialsSignificantly reduced drying times when compared to convectional oven without vacuumDrying of intricately designed partsElimination of oxidation associated with heat treatmentTargeted recovery of degassed productCapacity refers to the trap in ml* Rotary Vane Pump, Water Vapor Compatibility 40 mbar.
Diaphragm Pumps for Vacuum Ovens
Gentle drying of heat sensitive materialsSignificantly reduced drying times when compared to convectional oven without vacuumDrying of intricately designed partsElimination of oxidation associated with heat treatmentTargeted recovery of degassed productCapacity refers to the trap in ml* Rotary Vane Pump, Water Vapor Compatibility 40 mbar.
Digital block thermostats QB, for QBD, QBH series
Accessory blocks for QB series only. Interchangeable. Aluminium. Block dimensions (L x W x H): 140 x 50 x 63 mm. For e.g. test tubes or microliter vials from 0.2 ml to 2.0 ml.Further blocks available on request.
Digital Dry Bath AccuBlock™Mini
AccuBlock™ Mini combines digital control, a fast heating microtube block and a convenient AccuRack™ transfer system, all in an ultra compact footprint. With a temperature range to 100°C which can be set in increments of 0.1°C, AccuBlock™ Mini is suitable for a range of uses in life science, molecular biology, environmental and industrial laboratories and a variety of applications including incubation, enzyme reactions, immunoassays.Accepts up to 12 x 1.5 ml tapered microcentrifuge tubesWith thermometer well for temperature confirmation and calibrationMicroprocessor controlled heating elementEasy to read 4 digit LCD displayBuilt in calibration mode allows end users to calibrate the bath as neededThe included AccuRack™ allows quick loading or unloading of all sample tubes simultaneously. It is self standing and can be used to hold samples while they are prepared for loading. Samples can also be loaded directly into the AccuBlock™Mini without the AccuRack™.Specifications:Temperature range:Ambient +5 °C ... 100 °C, resolution 0.1 °CTemperature uniformity:±0.2 ºCTemperature accuracy:±0.2 ºCTimer:0 ... 19h 59 min or continuousBlock material:Anodized aluminumBlock capacity:12 x 1.5 ml tubesDimensions (W x D x H):140 x 120 x 60 mmWeight:1.3 kgSupply requirements:230 V 50/60 Hz
Digital dry bath LLG-uniBLOCKTHERM
Suitable for use in microbiological, histological, clinical, industrial and environmental laboratories. Various types of optional heating blocks are available as accessories for the LLG-uniBLOCKTHERM.Digital control with LED displayCan be used up to 120 °CFor timer and continuous operationCan be used with different heating blocks1 x block unitWith overheating protectionScope of supply: LLG-uniBLOCKTHERM, removal tool, lidPlease order heating blocks separately.Temperature accuracy at 100 °C:±1.0 °CTemperature accuracy 100 °C:±2.0 °CTemperature increment:±1.0 °CSpecificationsTemperature range:RT ... 120 °CTemperature uniformity at 37 °C:±0.5 °CTemperature accuracy at 37 °C:±0.5 °CTimer: Block material:0 ... 99:59:00 min AluminiumDimensions (W x D x H):175 x 290 x 85 mmWeight:3 kgPower supply:220 ... 240 V, 50/60 HzWarranty:3 years
Digital Dry Bath microBLOCK
Suitable to incubates PCR strips or tubes with sizes up to 50ml. The compact microBLOCK offers the smallest footprint of all digital dry baths on the market combined with a very good heating rate.Block material aluminiumExchangeable blocks, for different tube sizes from 0.2 to 50 mlTimerCompact, fits in the palm of your handClear cover ensures temperature uniformityDigital temperature controlSpecificationsTemperature Range:Ambient +5 ... 80 °COperating Temperature:5 °C ... 35 °CTemperature Accuracy:±0.5 °CTimer:0 ... 999 minDimensions (W x D x H):100 mm x 152 mm x 112 mmWeight:850 gSupply requirements:100-240 V, 50-60 Hz* Not compatible with clear cover
Digital water baths
The unstirred, general purpose water baths are available in 5 sizes.Color TFT display with control panelCalibration offset featureLow liquid alarmOver temperature alarm5 user programmable pre-sets (temperature and duration)5 languages (English, German, French, Spanish, and Chinese)Integrated independent timerEco-modeSafety thermostatHigh-gabled, clear lids accommodate taller media bottlesRear-mounted drain (10, 20, and 28 litres)Recessed HandlesScope of supply: Digital water bath, incl. lid
Digital water baths JB Nova
General purpose water baths with stable temperature control, simple controls and fast heat up. A choice of four models with a base tray and lid included as standard.Ambient +5 °C to 95 °CUnique Set and Forget™ technology, fast reliable temperature controlStability ± 0.5 °CSimple, intuitive controls, quick and easy to set temperatureDrain tap on 12L, 18L and 26L bathsPractical front panel lock - disables front panel controls preventing unintentional temperature changes3-year warrantyAccessory polypropylene spheres or a lid must be used at temperatures between +60 °C and +99 °C. Please order PP spheres separately.
Dish attachment AS 4000.3 for Incubator Shaker KS 4000 i control/KS 4000 ic control
For smooth shaking operations in the low viscosity range, e.g. for cell cultures, nutrient media in Petri dishes, culture bottles and vessels with a low centre of gravity. With integrated slip-resistant foil (PP).
Divided inner doors for CO2 incubators CB / CBF
Divided inner door with cell therapy compartmentalisation. This option is equipped with additional partition walls for spatial incubation subdivision to prevent mixing up of sample vessels.
Door hinge on the left for CO2 incubators CB series
Outer door and standard glass inner door with door hinge on the left.
Door lock for Cooling incubators KB ECO
Lockable door handle for safe storage of samples in the cooling incubator.
Drip pan for incubator INC 125 F digital and incubator shaker INC 125 FS digital
Ideal for collecting accidentally spilled samples or for use as a water reservoir to reduce evaporation losses during the cultivation process.
Dry Baths, AccuBlock™
The device is available in single, dual, and four block configurations and provide a broad temperature range up to 150 °C, which makes them useful for a variety of applications in molecular biology, histology, clinical, environmental, and industrial laboratories.Single, dual and four block capacityDual displayUSB connectivity enables traceability of dataMolded block chamberPlease order blocks separately.SpecificationsTemperature range: Temperature uniformity: Temperature resolution: Temperature accuracy:Ambient +5 to +150°C, adjustable in 0.1°C steps ± 0.2°C ± 0.1°C ± 0.3°CTemperature control:MicroprocessorTimer:1 ... 99h 59 min or continuousBlock material:AluminiumDimensions (W x D x H)Single / Dual Block: 4 Block:210 x 290 x 120 mm 210 x 390 x 120 mmWeightSingle / Dual Block: 4 Block:3.2 kg 4.4 kgPower supply:230 V, 50/60 Hz
Dry Block Heater
Digital block heaters for 1, 2, 3 or 4 aluminium blocks provides precise temperature control in small vessels. Included PT 1000 temperature sensor allows temperature control directly in the sample vessel. It is used with PCR tubes, PCR strips, Greiner tubes, microplates and cuvettes. The block heater is ideal for melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media tests, coagulation tests, blood-urea-nitrogen determinations and in situ hybridizations.Stepless adjustable temperature up to 120 °CTimer: Countdown, adjustable from 1 min to 99 h 59 minCounter: Display of heating timeHighly versatile with a large number of blocksError code displayFixed safety circuitAcoustic signal at end of testWithout blocks. Please order separately.
Dry Block Heater Matrix Δ+
Powerful Dry Block Heater for samples with very small volumes, e.g. blood samples, pharmaceutical agents, DNA/RNA samples or Elisa assays. Wide range of exchangeable attachments for various applications available.Without cross-contaminationLarge and clear display with a convenient menu structure allows for intuitive operationRobust aluminum die cast housingPlease order attachments separately.
Dry Block Heaters, 2 blocks, with lid
The digital Dry Block Heater with Heated Lid is designed for applications that require repeatable results and superior temperature stability. These multi-purpose units are ideal for isothermal incubation, enzyme reactions, immunoassays, nucleic acid denaturation and a wide variety of other laboratory procedures. Integral support rod holder with locking knob accepts optional External Temperature Probe Kit. Optional External Temperature Probe Kit monitors actual block or sample temperature. Block heater accepts one microplate block or two separate interchangeable modular blocks, accommodating various tube sizes from 0.2 ml micro-tubes to test tubes or vials up to 85 mm in height. Each block has a thermometer well for measuring block temperature. Efficient heating due to close tube-and-block contact with a low density design for exceptional temperature uniformity. The heated lid helps to regulate the temperature and reduce the amount of condensation on sample lids.Microprocessor controlLED-DisplayTemperature Calibration ModeCaution Hot IndicatorOvershoot ProtectionAudible AlarmWithout blocks. Please order separately.SpecificationsTemperature range: Temperature stability at 37 °C:ambient +5 to 100 °C ±0.2 °CUniformity within block at 37 °C:±0.2 °CUniformity across blocks at 37 °C±0.2 °CHeat up time to 100 °C:50 minPermissible ambient conditions:18 to 33 °CPower supply:230 V, 50/60 Hz
Dry Block Heaters, analogue
High wattage, constant-temperature Dry Block Heaters are economical, versatile and compact. These multi-purpose units are ideal for incubation and activation of cultures, enzyme reactions, immunoassays, melting/boiling points and a wide variety of other laboratory procedures. Each of the five models accept separate interchangeable modular blocks, accommodating various sample enclosures such as micro-tubes, centrifuge tubes, vials, microplates, and PCR strips or tubes. Each block has a thermometer well for measuring block temperature. Anodized aluminum modular blocks provide superior temperature stability and heat transfer.Microprocessor ControlAdjustment knobsWithout blocks. Please order separately.SpecificationsTemperature range lower / upper range:ambient +5 to 100 °C / 75 to 150 °CUniformity within block at 37 °C:±0.2 °CTemperature stability at 37 °C1 block: 2 blocks: 4 / 6 blocks:±1.5 °C ±2.0 °C ±2.5 °CUniformity across blocks at 37 °C / Heat up time to 100 °C:1 block: 2 blocks: 4 blocks: 6 blocks:- / 45 min ±0.1 °C / 50 min ±0.2 °C / 70 min ±0.3 °C / 75 minPermissible ambient conditions:18 to 33 °CPower supply:230 V, 50/60 Hz
Dry Block Heaters, digital
Designed for applications that require repeatable results and superior temperature stability. These multi-purpose units are ideal for incubation and activation of cultures, enzyme reactions, immunoassays, melting/boiling points, and a wide variety of other laboratory procedures. Integral support rod holder with locking knob accepts optional External Temperature Probe Kit. Optional External Temperature Probe Kit monitors actual block or sample temperature. Each of the models accept separate interchangeable modular blocks, accommodating various tube sizes from 0.2 ml microtubes to 50 ml centrifuge tubes. Each block has a thermometer well for measuring block temperature. Efficient heating due to close tube-and-block contact for maximum heat retention.Microprocessor ControlLED DisplayTemperature Calibration ModeCaution Hot IndicatorAudible AlarmWithout blocks. Please order separately.SpecificationsTemperature range: Temperature stability at 37 °C:ambient +5 to 120 °C ±0.2 °CUniformity within block at 37 °C:±0.2 °CUniformity across blocks at 37 °C / Heat up time to 100 °C1 block: 2 blocks: 4 blocks: 6 blocks:- / 45 min ±0.1 °C / 50 min ±0.2 °C / 60 min ±0.3 °C / 65 minPermissible ambient conditions:18 to 33 °CPower supply:230 V, 50/60 Hz
Drying and heating chambers ED Avantgarde.Line
Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.High temperature accuracy thanks to APT.line™ technologyElectromechanical control of the exhaust air flapChambers up to 115 l are stackableErgonomic handle designUSB connection for data recordingClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith natural convectionController with LCD display
Drying and heating chambers ED Classic.Line
Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.Uniform drying conditions thanks to APT.line™ preheating chamber technologyIdentical test conditions throughout the chamber interior independent of sample size and quantityAdjustable exhaust air flapClass 2 independent adjustable temperature safety device (DIN 12880) with visual alarmWith natural convectionController with timer functions