Circulation Heat Exchanger HTS
Heat exchanger systems with circulation pump for connection to cooling water on the primary side. The devices provide a cooling circuit with stable pressure/ ow and adjustable operating temperature. The cooling capacity is generated using a plate heat exchanger via the cooling water. Since there is no active cooling machine, the devices operate in a quiet and energy-saving manner and are a cost-effective alternative to conventional chillers e.g. for the temperature control of Peltier elements, bioreactors, etc.The model HTS 1 contains the heat exchanger system, however it does not have any temperature control. The device is therefore suited for applications with low requirements for control accuracy.Effcient circulation pumpTemperature stability ±0.1 KRS232 interfacePt100 external sensor connectionLow cooling water usageApplication protection with cooling stage separation
Circulation thermostat PT31
The PT31 circulation thermostat is equipped with high performance functions. The device is ideally suited for applications requiring a temperature range at a constant level. The robust locking mechanism of the PT31 provides a sturdy connection and ensures constant temperature control of the medium.Temperature control using Peltier technologySpace-saving, sturdy designSuitable for operation with non-flammable liquids (water or water/glycol mixture)
Circulator bath HRC 2 lite
Compact peripheral device designed for simple tempering tasks from -10 to 100 °C. Especially suitable for tempering bioreactors and laboratory reactors, open bath solutions or as a tempering source for measuring devices.The pressure and suction pump enables the operation of several small applications as well as external applications in open baths in combination with a level controller.Natural refrigerant R290Easy-to-clean stainless steel mesh filterInterfaces: RS 232, USBOptional control and monitoring via labworldsoft® and other laboratory softwareScope of supply: Circulator bath, 2 x olive for DN 8 hoses, USB A-B cable
Circulator bath RC 2 lite
Powerful recirculating chiller for external cooling tasks down to -10 °C. The RC 2 lite is suitable for cooling external equipment such as laboratory reactors, calorimeters, incubation shakers or rotary evaporators. The pressure and suction pump enables the operation of several small applications as well as external applications in open baths in combination with a level controller.Natural refrigerant R290Easy-to-clean stainless steel mesh filterInterfaces: RS 232, USBScope of supply: Circulator bath, 2 x olive for DN 8 hoses
Circulator baths CORIO™ CP
With insulated stainless steel bath tanks, flexible performance and an operating temperature range of up to 200 °C. Temperature control is possible either in the internal bath or in a connected external application.Suitable for internal and external applicationsHigh-quality stainless steel bath vessels with bath lid and drainIntegrated pump connections M16 x 1Integrated cooling coil for counter-coolingBright, white, easily visible display, even from a distanceLow-level warning systemEasy switching between internal and external circulationPowerful, continuously variable pumpPump capacity adjustable from 8 to 27 l/minVery quietRubber feet for secure standingUSB connectionRS232 interface3-point calibrationClass III (FL) according to DIN 12876-1Scope of supply: Circulator bath, mains power cable, connection box, bath, bath cover, hose connectors 8 and 12 mm
Circulator baths RC 2 basic
The RC recirculating chillers are designed to cool external equipment quickly and efficiently. The chillers offer short cooling times at a temperature stability of ±0.1 K and a working temperature range of -20 °C to room temperature. The RC 2 recirculating chillers are ideal for cooling external equipment such as laboratory reactors, calorimeters, incubating shakers or rotary evaporators.
Circulator baths RC 2 control
The RC recirculating chillers are designed to cool external equipment quickly and efficiently. They are ideal for cooling external equipment such as laboratory reactors, calorimeters, incubating shakers or rotary evaporators. The RC 2 control with wireless controller (WiCo) makes the device easy to operate remotely, enabling users to save space through the option of placing the chiller in a hard-to-reach area of the laboratory. Critical temperature control processes can be monitored and recorded, guaranteeing complete documentation of all measurement processes. With connection for external PT100 sensor (included in delivery).
Circulator baths RC 5 basic
Powerful recirculating chiller, designed for external cooling applications up to -30 °C. The energy-efficient chiller is operated with an eco-friendly refrigerant and reaches a high power density. This results in a comparatively small working space in the lab. Due to the excellent temperature stability they can handle even sophisticated applications. The isolated, high-quality bath has an integrated hopper and drain valve, ensuring safe and clean handling of the thermofluid.Speed-controlled refrigeration system (PEEK)Speed-controlled pump (PEEK)Natural thermofluid R290Extended operating temperature range until 80°CDigital level indicatorInterfaces: RS 232 and USB
Circulator baths RC 5 control
Powerful recirculating chiller, designed for external cooling applications up to -30 °C. The energy-efficient chiller is operated with an eco-friendly refrigerant and reaches a high power density. This results in a comparatively small working space in the lab. Due to the excellent temperature stability they can handle even sophisticated applications. The isolated, high-quality bath has an integrated hopper and drain valve, ensuring safe and clean handling of the thermofluid.Speed-controlled refrigeration system (PEEK)Speed-controlled pump (PEEK)Natural thermofluid R290Extended operating temperature range until 80°CDigital level indicatorInterfaces: RS 232 and USBRemote control via Wireless Controller (WiCo)Simplified and automated processes through 10 freely programmable temperature ramps with 10 steps eachTimer/CounterDegassing functionConnection of magnetic valves possible (Mulit IO)Alarm contact (Multi IO)Connector for standby contact input (Multi IO)Connection for external PT100 temperature sensor (included in delivery)
Circulator Baths, CORIO™ CD
CORIO™ CD Heating Circulators for internal and external temperature applications with stainless steel baths for working temperatures from 20 °C to 150 °C. CORIO™ Heating Circulators feature professional technology for demanding applications. These units facilitate internal temperature control in the bath tank or control of externally connected applications.For internal and external applicationsBright, white, easy to read displayVery quietPump change-over between internal and external circulationUSB connectionHigh-quality bath tanks made of stainless steel with bath lid and drain tapIntegrated cooling coil for counter-cooling
Clamp for Thermostatic controllers Optima™ T100 / TC120 / TX150 / TXF200
For attaching the thermostats to any vertical sided tank with a maximum wall thickness of 35 mm for rectangular tanks, 30 mm for circular tanks (300 mm diameter), and a capacity of up to 50 l.
Coliform Bath MX
This bath is ideal for fecal coliform and E.coli testing.MX Temperature Controller Includes gabled, see-through coverIncludes cooling coil portOver-temperature protectionSingle-point calibration capabilitySpecificationsBath capacity:28 lWorking temperature range:Amb. +10 °C ... 135 °CTemperature stability:± 0.007 °CHeating power:1100 WDisplay:3.25" LCDFlow rate max.:11.9 l/minPressure max.:0.12 barOverall dimensions (W x D x H):546 x 353 x 457 mmWeight:29.9 kgSafety class:FL, IPower supply:240 VAC, 50 Hz
Compact Immersion circulator ICC basic
Compact immersion thermostat for tempering of liquids in open or covered vessels. The adjustable pressure and suction pump allows the ICC basic to be used for internal or external applications. A holding clamp for attaching the circulator to a bath is included. An optional cooling coil can be connected to the unit for temperature control below or near the ambient temperature. The ICC basic can be easily transported with the carrying handle and safely stored with the integrated stand.Complete packages with all necessary components (bath vessels, covers, bath bridges, pump connection sets and cooling coils) are also available. Visual and acoustic warning functions for excess temperature, sub-level and over-levelLED display for temperature and pump adjustmentMenu navigation via push and turn buttonsAdjustable safety circuitCalibration optionUSB/RS 232 interface
Compact Immersion circulator ICC control
Compact immersion thermostat for tempering of liquids in open or covered vessels. The adjustable pressure and suction pump allows the ICC control to be used for internal or external applications. Up to 10 individual programs with up to 10 steps can be stored in the device. A holding clamp for attaching the circulator to a bath is included. An optional cooling coil can be connected to the unit for temperature control below or near the ambient temperature. The ICC control can be easily transported with the carrying handle and safely stored with the integrated stand.Complete packages with all necessary components (bath vessels, covers, bath bridges, pump connection sets and cooling coils) are also available. Visual and acoustic warning functions for excess temperature, sub-level and over-levelTFT touch display for displaying and controlling all relevant parametersAdjustable safety circuitConnection for external Pt100 temperature probeUSB/RS 232 interface
Compact Recirculating Cooler, F-Series
Environmentally friendly operation with low energy consumptionNo side vents, instruments can be placed right next to other equipmentAll wetted parts made of stainless steel or high grade plasticLarge, bright LED displayCompact design and small foot printSplash-proof keypadDrain tapEasy filling
Compact refrigerated circulators - Ministat®
Exceptionally compact and powerful, Ministats have been the smallest cooling circulators in the world since 1976. Their compact form allows them to be placed in small spaces, e.g. in a laboratory extraction hood. Compliance with DIN 12876, class 3 allows them to be used unsupervised in continual operation. The maximum ambient temperature is 40 °C.The powerful variable speed pressure/suction pump can thermoregulate objects in the bath or external applications. The maximum pressure can be controlled using an optional pressure sensor - VPC (Variable Pressure Control) - which protects delicate glassware. The small volume and high power of the Ministats means exceptionally rapid heating and cooling rates are achieved. Optional displacement inserts reduce the bath volume by approximately 50 % amplifying this effect and reducing moisture absorption in the thermal fluid. All models have Active Cooling Control for cooling power control at the maximum working temperature and an automatic cooling power regulation for energy saving operation and reduced heat dissipation into the lab.The bath opening is large enough to allow small objects to be thermoregulated within. All parts in contact with the thermal fluid are made of stainless steel or Polycarbonate.Ministats have the Pilot ONE with Plug & Play technology (proven since 1980). In the event of service the controller can be simply swapped. Using a data cable the Ministat can be remotely controlled. The Pilot ONE has a state of the art microprocessor controller and a high precision temperature measurement system for exact and reproducible temperature control. The functionality and TFT-display are supported by Easy Control.Typical applications for the smallest cooling circulator in the world are external closed systems e.g. photometer, refractometer and viscosimeter.Pump pressure max.: Max. suction:27 L/min / 0.7 bar 20 L/min / 0.4 barTemperature Stability to DIN 12876:0.02 KAll units use natural refrigerant as standard.*with displacement insert
Compatible Control Refrigeration Circulators K6
The K6 models are compact refrigeration bath circulators for temperatures from -25 to 200°C. These units are a combination of a refrigerated bath and immersion circulator, in combination with an integrated pump they are suitable for external open (with level control) and closed applications. The CC-E immersion circulator with its suction / pressure pump is suitable to externally open and closed applications. The temperature stability is 0.02K for the Compatible Control models and 0.05K for the KISS models.Safety class:FL, IIIHeating capacity :2 kWPressure pumpCC-K6 / CC-K6s:27L/min / 0.7 barKISS-K6 / KISS-K6s:14 L/min / 0,25 barAll units use natural refrigerant as standard.
Cooling circulator Variostat® for a variety of baths
This unique immersion circulator can thermoregulate a wide range of baths between -30°C and 150°C. This innovative construction allows the user ultimate flexibility. The circulation can be adjusted to suit the bath size using the stepless, variable speed suction/pressure pump. The pump can also be controlled with an optional pressure sensor for external applications.
Cooling circulators
Combinations of immersion circulators and insulated refrigeration baths are low-cost solutions for direct thermoregulation within the temperature range -20/-30°C to +200°C. The refrigeration baths operate with natural refrigerants. A pump adapter (optional) can be fitted for thermoregulation of externally closed applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore suitable for external open thermoregulation applications. The temperature stability is 0.02K for the Compatible Control models and 0.05K for the KISS models.
Cooling/heating bath circulator CBC visc lite
Designed for combination with the IKA ROTAVISC viscometers and covers a wide temperature range.A second beaker (600 ml) can be pre-tempered during the measurementOptimised water flow management in the insulated bath for fast and precise temperature control.Equipped with environmentally friendly natural refrigerant R290External pump connection for heating standard vessels according to DIN for absolute viscosity definition with ELVAS spindles or double-walled beakersEasy to maintain thanks to easily removable and therefore easy-to-clean air filters
Double-walled wide-mouth bottles GLS 80®, DURAN®
The DURAN® double-walled wide-mouth bottles GLS 80® incorporate an integral jacket that isolates the contents from the external environment. Heated or cooled liquids can be circulated through the jacket to control the temperature within the screw topped DURAN® bottle.ApplicationsSimple, low cost, jacketed chemostat or bioreactor for cell cultureVessel for temperature-controlled reactions such as enzyme digestionsSimple continuous flow stirred reactor system with the optional GLS 80® cap componentsThermostatic vessel to maintain fluids, or high viscosity liquids at a constant temperature, useful when working with endo- or exothermic reactionsLarge cold trap or condenser when used with dry ice in the inner containerFeaturesUsable temperature range of - 40 to 120 °CManufactured from DURAN® borosilicate 3.3 glassAll components are fully autoclavableAvailable in two sizes: 500 and 1000 mlCompatible with full range of wide mouth GLS 80® connection cap systems for liquid addition or removal during processing
External Pt100 Sensors
For external thermoregulation applications, standard cable length 1.5 m
