Heating bath circulator ECO ET Gold, with polycarbonate bath tank
Thermostatic bath circulator with latest microprocessor technology. With individual setting of the internal and external circulation, even during operation. Separate setting for overtemperature protection and individual limiting of working temperature range.User friendly menu navigation in plain languageSafety class III for operation with flammable and non-flammable liquidsPump with 6 adjustable performance levelsCooling coil as standardUSB interface as standardUpgradeable with Pt 100/LiBus module for external control and remote control via Command consoleUpgradeable with an interface module (analogue module, contact module, RS 232/485 module, Profibus, Ethernet-USB module)Coloured TFT display for simultaneous indication of actual and set values and graphic illustration of the temperature profileProgrammer with 150 temperature/time segments that can be separated into 5 programsStainless steel pump connectors (M16x1 thread)
Heating bath circulator ECO ET Silver, with polycarbonate bath tank
Thermostatic bath circulator with latest microprocessor technology. With individual setting of the internal and external circulation, even during operation. Separate setting for overtemperature protection and individual limiting of working temperature range.User friendly menu navigation in plain languageSafety class III for operation with flammable and non-flammable liquidsPump with 6 adjustable performance levelsCooling coil as standardUSB interface as standardUpgradeable with Pt 100/LiBus module for external control and remote control via Command consoleUpgradeable with an interface module (analogue module, contact module, RS 232/485 module, Profibus, Ethernet-USB module)Monochrome grafic LCD display for simultaneous indication of actual and set valueIntegrated programmer, 1 programme with max. 20 segmentsPlastic pump connectors (13 mm olive)
Heating bath circulator, CORIO™ CD-B, with stainless steel bath tank
Heating bath circulator for internal and external temperature applications with stainless steel bath tank and pump connections.Bright, white, easy to read displayVery quietPump change-over between internal and external circulationUSB connectionIntegrated drain screw (except for B5)Class III (FL) according to DIN 12876-1
Heating bath circulators
Heating bath circulators are suitable for temperatures up to 200 °C or 300 °C depending on model. The Compatible Control models have a continuously variable pressure and suction pump. The pump pressure can be controlled with an optional pressure sensor, and so can protect your valuable glass-ware from breakage. The machines are preferred and used for temperature control of externally connected applications. Additionally there is the ability to control the temperature of objects placed directly in the open bath.Temperature control range CC-205B / KISS-205B: CC-304B / CC-308B / CC-315B: (20) 45 ... 200°C 28 ... 300°CSafety class:FL, IIIStability to DIN 12876 CC-205B / CC-304B / CC-308B / CC-315B: KISS-205B: 0.02K 0.05K*using displacement insert
Heating bath circulators CORIO™ C-B, with stainless steel bath tanks
Heating bath circulators for internal temperature applications with stainless steel bath tanks for working temperatures from 20 °C to 100 °C, complete set with bath tanks.For internal applicationsBright, white, easy to read displayWhisper quietIntegrated drain screw (except for B5)
Heating bath circulators CORIO™ C-BT, with transparent bath tanks
Heating bath circulators for internal temperature applications with transparent bath tanks for working temperatures from 20 °C to 100 °C.For internal applicationsBright, white, easy to read displayWhisper quiet
Heating bath circulators SAHARA, with PPO bath tanks
These polyphenylene oxide baths are a good alternative to stainless steel baths. The circulators can be mounted on all four sides of the bath for easy reading. The SC 100 controller is equipped with 3 languages, audible and visual alarms and 5 user-definable programs. Two pump speeds allow the flow rate of the water to be adjusted to avoid turbulence.RobustCorrosion-resistantIntuitive user interfaceBright displayCirculators are freely rotatableScope of delivery: Circulators with PPO bath tanks, connection cable, bath bridge with seal and wing screws, fittings, terminals, pump plugs for external circulation, 1.8 m power cable.Specifications:SC 100-S5P // SC 100-S14PTemperature range:13 °C … 100 °CCapacity:5 l // 14 lWeight:5.1 kg // 6.3 kgWidth:190 mm // 358 mmDepth:388 mm // 452 mmHeight:360 mm // 361 mmPower supply:230 V / 50 Hz
Heating bath HB 1500
The heating bath HB 1500 is developed for varied tasks. The bath can be filled with water, oil or sand. Modern microprocessors control the temperature. With measuring circuit monitoring for over- and under-temperature, sensor and line short-circuit, as well as sensor and line breakage.Microprocessor controller with 4-digits 7-segment display, 10 mm high, greenFreely configurableSelf-optimising temperature controlMeasuring and control range up to 260 °CSetting of heating power from 1 to 99 %Overtemperature switch-off >10 K + setpointWear-free internal temperature sensor at the bottom of the potOn-Off switch 2-pole, green, illuminatedSwitchable to external sensorMaterial bath/housing stainless steel, front and rear anodised aluminium
Heating bath HB 1500-S
The heating bath HB 1500-S is developed for varied tasks. The bath can be filled with water, oil or sand. The appliance is equipped with 2 temperature controllers with microprocessor. The upper temperature controller serves as a safety temperature limiter. If the safety temperature is exceeded, the heating is switched off at all poles. The temperature is measured via an internal temperature sensor at the bottom of the pot.Microprocessor controller with 4-digit 7-segment display, 10 mm high, greenFreely configurableSelf-optimising temperature controlMeasuring and control range up to 260 °CSetting of heating power from 2 to 99 %Switchable to external sensorMaterial bath/housing stainless steel, front and rear anodised aluminium
Heating Bath HB Digital
Compact and ergonomic heating safety bath for all tempering media.Ergonomic handlesKey button to lock heating bath temperatureClear, black-and-white displayPermanent set-point/actual temperature display3 different safety operating modesUSB interface
Heating Bath HB eco
Compact and ergonomic heating safety bath.Ergonomic handlesClear, black-and-white displayAlternating set-point/actual temperature displayUSB interface
Heating bath HBR 4 control
The heating bath is noted for:Cylindrical bath shapeHeating elements integrated into the bath baseHeat transfer media can be low-viscous oil (50 mPas) or waterTwo carry handlesInfinitely variable safety temperature limiter according to DIN 12877Double-jacketed mantle protection against burnsDigital display for target, actual and safety temperatures as well as speedIntegrated magnetic stirrer drive to circulate the tempering fluid, allowing for better heat distribution in the bathRS 232 interface
Heating bath liquid, BUDDE
Use:BUDDE heating bath liquid can be used continuously as a heating medium up to approx. 170 °C. Higher temperatures (below flash point) are possible, but will result in rapid darkening. The low pour point allows the bath liquid also to be used as a cooling medium. Mixtures with 10 % to 30 % water achieve best results.The crucial advantages of BUDDE heating bath liquid compared tothe oils or other organic liquid mainly used are:accidental spillage of water into the bath does not lead to dangerous spitting at temperatures over 100 °C, as the water dissolves in the heating bath liquid and subsequently evaporates safelyBUDDE heating bath liquid can easily be rinsed away with water which eases cleaning of laboratory equipment, e.g. distillation flasks, and also bench or floor if the bath liquid is accidentally spilled.BUDDE heating bath liquid does not foam when mixed with water.Viscosity on addition of water:BUDDE heating bath liquid is quite viscous at ambient or low temperatures, and therefore sometimes difficult to dispense. The addition of 10-20 % water reduces the viscosity and enables easier handling. If the mixture is then heated to 100 °C, the water evaporates without boiling. Further heating is only shortly delayed by this. Before next heating, water can be added again.Water solubility: BUDDE heating bath liquid can be mixed with water in any ratio. The hardness of the water has no effect on the bath liquid.
Heating block set for digital dry bath LLG-uniBLOCKTHERM
Heating block with aluminium beads as an alternative to exchangeable blocks with borings.The aluminium beads ensure high thermal conductivity. Various types of vessels, such as tubes, bottles, and microtitre plates can be individually assembled and simultaneously tempered in the dry bath. Easy to remove from the LLG-uniBLOCKTHERM thanks to two handles. The heating block holds a max. capacity of 700 ml.Scope of supply: Heating block, aluminium beads (1 kg)
Heating circulator bath DYNEO™ DD-BC
For internal and external applications. With powerful components and a large, easy-to-read coloured TFT display. Operation is simple and intuitive via the central controller on the front of the device.Easy switching between internal and external circulationIntegrated cooling coil for counter-coolingBuilt-in drain tapIntegrated programmer for 8 x 60 program stepsContinuously adjustable, powerful pressure pumpPump connections M16 x 1 (outer thread)USB interfaceExternal Pt100 sensor connectionHigh-quality bath tanks made of stainless steelClass III (FL) acc. to DIN 12876-12 hose connectors for 8 and 12 mm I.W. and bath lid included.For internal and external applications. With powerful components and a large, easy-to-read coloured TFT display. Operation is simple and intuitive via the central controller on the front of the device.Easy switching between internal and external circulationIntegrated cooling coil for counter-coolingBuilt-in drain tapIntegrated programmer for 8 x 60 program stepsContinuously adjustable, powerful pressure pumpPump connections M16 x 1 (outer thread)USB interfaceExternal Pt100 sensor connectionHigh-quality bath tanks made of stainless steelClass III (FL) acc. to DIN 12876-12 hose connectors for 8 and 12 mm I.W. and bath lid included.
Heating circulator bath DYNEO™ DD-BC.A, with analogue interface
For internal and external applications. With powerful components and a large, easy-to-read coloured TFT display. Operation is simple and intuitive via the central controller on the front of the device.Easy switching between internal and external circulationIntegrated cooling coil for counter-coolingBuilt-in drain tapIntegrated programmer for 8 x 60 program stepsContinuously adjustable, powerful pressure pumpPump connections M16 x 1 (outer thread)USB interfaceExternal Pt100 sensor connectionHigh-quality bath tanks made of stainless steelClass III (FL) acc. to DIN 12876-12 hose connectors for 8 and 12 mm I.W. and bath lid included.For internal and external applications. With powerful components and a large, easy-to-read coloured TFT display. Operation is simple and intuitive via the central controller on the front of the device.Easy switching between internal and external circulationIntegrated cooling coil for counter-coolingBuilt-in drain tapIntegrated programmer for 8 x 60 program stepsContinuously adjustable, powerful pressure pumpPump connections M16 x 1 (outer thread)USB interfaceExternal Pt100 sensor connectionHigh-quality bath tanks made of stainless steelClass III (FL) acc. to DIN 12876-12 hose connectors for 8 and 12 mm I.W. and bath lid included.
Heating circulator bath DYNEO™ DD-BC.D, with RS232 interface
For internal and external applications. With powerful components and a large, easy-to-read coloured TFT display. Operation is simple and intuitive via the central controller on the front of the device.Easy switching between internal and external circulationIntegrated cooling coil for counter-coolingBuilt-in drain tapIntegrated programmer for 8 x 60 program stepsContinuously adjustable, powerful pressure pumpPump connections M16 x 1 (outer thread)USB interfaceExternal Pt100 sensor connectionHigh-quality bath tanks made of stainless steelClass III (FL) acc. to DIN 12876-12 hose connectors for 8 and 12 mm I.W. and bath lid included.For internal and external applications. With powerful components and a large, easy-to-read coloured TFT display. Operation is simple and intuitive via the central controller on the front of the device.Easy switching between internal and external circulationIntegrated cooling coil for counter-coolingBuilt-in drain tapIntegrated programmer for 8 x 60 program stepsContinuously adjustable, powerful pressure pumpPump connections M16 x 1 (outer thread)USB interfaceExternal Pt100 sensor connectionHigh-quality bath tanks made of stainless steelClass III (FL) acc. to DIN 12876-12 hose connectors for 8 and 12 mm I.W. and bath lid included.
Heating circulator MAGIO MS/MX
For precise temperature control of internal and external applications.Simple control of complex applicationsInfinitely adjustable, extremely powerful pressure and suction pumpLarge, high-resolution TFT touch display with multilingual user interfaceMedium-contacting parts made of stainless steelIntegrated programmerExternal Pt100 connectionUSB interfaceRS232 interfaceEthernet interfaceHigh quality thermal insulation of the bath tanksIntegrated drain cock for easy and safe emptyingClassification III according to DIN 12876-1
Heating circulators
Good things come in small packages! Thanks to their low bath volumes the models CC-104A und KISS-104A (with polycarbonate bath) as well as the CC-202C and KISS-202C (with stainless steel bath) are especially suitable for controlling the temperature of small external applications. All models are fitted with rear mounted M16 x 1 pump connections as standard. Models with the Pilot ONE have a speed regulated pressure/suction pump. The temperature constancy, in accordance with DIN12876, is 0.02 K with the Compatible Control models and 0.05 K for the KISS models. Models CC-202C and KISS-202C are fitted with an integrated cooling coil as standard. With the models CC-104A and KISS-104A the cooling coil is an optional extra.Temperature range CC-104A/KISS-104A: CC-202C/KISS-202C: (15) 25 to 100 °C (-30) 45 to 200 °CTemp. Stability to DIN 12876 CCmodels: KISS models: 0.02 K 0.05 KSafety class:FL, IIIBath depth:150 mmHeating capacity:2 kW
Heating circulators with stainless steel baths
The insulated stainless steel baths are suitable for use up to 200°C. All models have a bridge-mounted immersion circulator. With a pump adapter, this combination can also be used with externally closed and externally open (with option level control) applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore also suitable for external open applications.Stability to DIN 12876:CC models:0.02KKISS models:0.05KMax. temp.:200°CSafety class:FL, III