HPLC starter kits 3, Generation 2.0, GL 45
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Complete set for one HPLC system with up to 4 solvent reservoirsPrice advantage compared to ordering piece by pieceSuitable for all current HPLC systemsUse the supplied blind plugs to tighten connectors which are temporarily inactive or not in useScope of supply: 4 x SafetyCaps III, 4 x air valve, 4 x change indicator, 12 x 1,6/ 12 x 2,3/ 12 x 3,2 mm PFA fittings, 8 x PFA blind plugs, 4 x labelling field
HPLC starter kits 4, Generation 2.0, GL 45
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Complete set for one HPLC system with up to 4 solvent reservoirsPrice advantage compared to ordering piece by pieceSuitable for all current HPLC systemsUse the supplied blind plugs to tighten connectors which are temporarily inactive or not in useScope of supply: 4 x SafetyCaps IV, 4 x air valve, 4 x change indicator, 16 x 1,6/ 16 x 2,3/ 16 x 3,2 mm PFA fittings, 12 x PFA blind plugs, 4 x labelling field
HPLC starter kits 6, Generation 2.0, GL 45
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Complete set for one HPLC system with up to 4 solvent reservoirsPrice advantage compared to ordering piece by pieceSuitable for all current HPLC systemsUse the supplied blind plugs to tighten connectors which are temporarily inactive or not in useScope of supply: 4 x SafetyCaps VI, 4 x air valve, 4 x change indicator, 24 x 1,6/ 24 x 2,3/ 24 x 3,2 mm PFA fittings, 20 x PFA blind plugs, 4 x labelling field
HPLC Supply and waste set
Scope of supply:4 x Safety Cap III, GL458 x air valve1 x Safety Waste Cap, GL451 x Exhaust filter L, V3.0, with splash guard and change indicator, service life 12 months1 x 5 l canister, HDPE4 x Laboratory bottle DURAN, GL45, 1000 ml, clear glass, with cap and pouring ring5 x PFA-fitting, 2.3 mm OD, violet5 x PFA fitting, 1.6 mm OD, green10 x PFA fitting, 3.2 mm OD, blue10 x PFA blind plug2 x hose connectors, straight, 6 - 8 mm ID1 x hose connectors, curved, 5.0 - 11.5mm ID1 x hose connectors, angled, 9.5 - 10 mm ID
HPLC Supply and waste set, electrostatic conductive
Scope of supply:4 x Safety cap III, GL458 x air valve1 x Safety waste cap, S60/61, electrostatic conductive1 x Exhaust filter L, V3.0, with splash guard and change indicator, service life 12 month1 x 5 l canister, HDPE-EL1 x Grounding cable, 2 x clamp, L = 1,5 m4 x Laboratory bottle DURAN, GL45, 1000 ml, clear glass, with cap and pouring ring5 x PFA-fitting, 2.3 mm OD, violet5 x PFA fitting, 1.6 mm OD, green10 x PFA fitting, 3.2 mm OD, blue10 x PFA blind plug2 x hose connector, straight, 6 - 8 mm ID1 x hose connector, curved, 5.0 - 11.5mm ID1 x hose connector, angled, 9.5 - 10 mm ID
HPLC Supply-Set II, type 4
This set with storage bottle and safety cap ensures a safe supply of solvent. The air valve blocks the escape of solvent vapours and ensures pressure equalisation during withdrawal.Scope of supply:Safety Cap II (GL28), air valve, change indicator, 1 x 100 ml laboratory bottle (brown glass), 2 x 1,5 m capillary 3,2 mm OD, 2 x PTFE suction filter, 2 x PFA fitting 1,6 mm OD, 2 x PFA fitting 2,3 mm OD, 2 x PFA fitting 3,2 mm OD, 1 x PFA blind plug, labelling field
HPLC Waste disposal set 1, V2.0
Waste disposal set consisting of:Safety Waste Cap GL 452 x PFA fitting 2.3/3.2 mm OD1 x PP tube connector 5,0 - 11,5 mm ID5 l canister, HDPEExhaust filter M, with splash guard and change indicator
HPLC Waste disposal set 2, V2.0
Waste disposal set consisting of:Safety Waste Cap GL 452 x PFA fitting 2,3/3.2 mm OD1 x PP tube conector 5,0 - 11,5 mm ID10 l canister, HDPEExhaust filter M, with splash guard and change indicator
HPLC Waste disposal set 3, V2.0
Waste disposal set consisting of:Safety Waste Cap S 502 x PFA fitting 2,3/3.2 mm OD1 x PP tube conector 5,0 - 11,5 mm ID5 l space saving canister, PPExhaust filter S, with splash guard and change indicator
HPLC Waste disposal set 4, V2.0, S 60/61
Waste disposal set consisting of:1 x SafetyWasteCap S 60/612 x PFA fitting 2,3/3.2 mm OD1 x PP tube conector 5,0 - 11,5 mm ID12 l canister, HDPEExhaust filter M, with splash guard and change indicator
HPLC Waste set 20
Scope of supply:1 x Safety Waste Cap, S60/613 x PFA fitting 2.3 mm OD3 x PFA fitting 2.3 mm OD3 x PFA fitting 3.2 mm OD3 x PP tube connector 5.0 - 11.5mm ID1 x GL14 connection for exhaust filter1 x canister, S60/61, 5 l, HDPE, UN-X1 x exhaust filter M, with splash guard and change indicator
Installation wrench, POM, hexagonal
For tightening and loosening PFA fittings, with lateral slot to lead through tubing.
Level controls, PTFE, electrically conductive
Extension for SafetyWasteCaps 3.0.
Locking nuts, PP, for thread adapters with ground joint
To loosen stuck ground joints.
Mounting key for fittings, POM
For tightening and loosening fittings (1.6/2.2/3.2 mm OD), with lateral slot to lead through tubing.
Multiple bottle distributors GL 45, HDPE
Up to 4 Safety Caps or Safety Waste Caps can be installed with the multiple bottle distributor.GL 45 (w) thread4 x GL 45 (m) connectionsElectrically conductiveIncl. 1 x blind cap
Multiple bottle distributors GLS 80, HDPE
The S.C.A.T. system for solvent safety remains permanently closed, the "safety chain" is not interrupted during the rinsing process of the HPLC system. After the analysis has been completed, the system is cleanly returned to its original state.Up to 4 SafetyCaps can be installed on the rinsing bottleSimple and safe handling due to firmly seated capillariesGLS 80 (w) thread4 x GL 45 (m) connectionsElectrically conductive
Multiple bottle distributors, PP/PPS
Screw cap with free movable insert made of PP, with 4 lateral connectors GL45 and 3 centric capillary connectors (UNF 1/4"), incl. 3 blind fittings.
Multiport, PTFE
Multiport for capillary and tubing connectors on b.safe caps with thread NPT 1/8". With PFA fittings for capillaries (O.D. 1.6/2.2/3.2 mm) and hose olives for tubing with I.D. 5.5 to 8.0 mm. Fittings (UNF 1/4"), hose olives (NPT 1/8").
Power supply unit for electronic level control
EU 220/230 V / 24 V. Cable length 1900 mm.
Quick couplings 2.0, for Safety Caps / Safety Waste Caps, PP
For safe connection of capillaries with outer diameter 1.6 / 2.3 / 3.2 mm.Drip protection due to integrated locking valveClosed system for drip-free separationEPDM sealIncl. PFA fittings (1.6 / 2.3 / 3.2 mm ID)Quick couplings for screwing into the standard connectors of Safety Caps (UNF 1/4" 28G), incl. 3 PTFE sealing balls (1.6 / 2.3 / 3.2 mm ID)
Quick couplings, PP
Two-part tubing coupling with PFA Fitting to connect capillaries with O. D. 3,2 mm. When the couplings are separated, the valves are automatically closed in order to avoid solvent escape.
Safety Caps V2.0, GL 45
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Scope of suppy:Safety Cap, air valve, change indicator, PFA fittings, PFA blind plug, labelling field
Safety Caps, 38-430
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Scope of supply:Safety Cap, air valve, change indicator, PFA fittings, PFA blind plug
Safety Caps, B 53
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Scope of supply:Safety Cap, air valve, change indicator, PFA fittings, PFA blind plug
Safety Caps, B 83
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Scope of supply:Safety Cap, air valve, change indicator,PFA fittings, PFA blind plugs
Safety Caps, GL 32
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Scope of supply:Safety Cap, air valve, change indicator, PFA fittings, PFA blind plug
Safety Caps, GL 38
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Scope of supply:Safety Cap, air valve, change indicator, PFA fittings, PFA blind plugs
Safety Caps, GL/ S 40
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Scope of supply:Safety Cap, air valve, change indicator, PFA fittings, PFA blind plug
Safety Caps, GL/ S 40, with shut-off valve
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Scope of supply:Safety Cap, shut-off, air valve, change indicator, PFA fittings, PFA blind plug, labelling field
Safety Caps, GL/ S 40, with shut-off valve
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Scope of supply:Safety Cap, air valve, change indicator, PFA fittings
Safety Caps, GLS 80
For the safe withdrawal of solvents. Screw caps, with freely movable insert made of PTFE, with PFA fittings for capillaries and an air valve. For maximum efficiency, we recommend that the vent is changed every 6 months.Scope of supply:Safety Cap, air valve, change indicator, PFA fittings, PFA blind plugs
Safety caps, GreenLine, GL45, PEEK, PFAS Analytic
Screw caps, with freely movable insert, for connecting capillary tubing and air valve. For PFAS analysis of polyfluorinated chemicals according to DIN 38407-42/ DIN 38414-14.Scope of supply: Cap, fittings (PE), air valve, service life indicator, labelling field