Flocculator FP 4
The digital flocculator was specially designed for coagulation and flocculation determinations in water treatment analysis. The practical handle makes it possible to carry out tests in real time in the laboratory or on site. The device can be powered by a car cigarette lighter or plugged into the power grid. The speed and timer (1 min to 99 h 59 min) can be easily set using the ergonomic rotary knob and LED display. The robust brushless motor delivers precise and reproducible stirring speeds and thanks to SpeedServo™ torque compensation technology, the speed remains constant even if the viscosity of the sample changes. The central illumination system improves sample visibility during the flocculation process and makes it easier to observe results in real time. Stainless steel stirring rods are adjustable in height.
Flocculator JLT
The digital flocculator was specially designed for coagulation and flocculation determinations in water treatment analysis. The speed and timer (1 to 999 min or 1 to 99 h) can be easily set and monitored via the high-visibility LED display. The robust brushless motor delivers precise and reproducible stirring speeds and thanks to SpeedServo™ torque compensation technology, the speed remains constant even if the viscosity of the sample changes. The illuminated back panel improves sample visibility during the flocculation process and makes it easy to observe results in real time. Stainless steel stirring rods are adjustable in height.
Food butyrometer, borosilicate glass
Food butyrometer according to Roeder‘s weighing method.
Funnel set for BOD determination
Funnel set for BOD5 determination with the CellOx® 325/FDO® 925 oxygen sensors in Winkler bottles (NS 19).
Gas detector X-am®2800
The X-am® 2800 multi-gas detector measures up to four gases and is equipped with a particularly shock-resistant CatEx sensor. With the Dräger Gas Detection Connect software, it offers live data transmission and powerful fleet management. The detector has been optimised for personal monitoring and offers maximum safety at low operating costs.Scope of delivery:X-am®2800 gas detector without charger, sensors: Ex, O2, CO, H2S
Gas detector X-am®2800
The X-am® 2800 multi-gas detector measures up to four gases and is equipped with a particularly shock-resistant CatEx sensor. With the Dräger Gas Detection Connect software, it offers live data transmission and powerful fleet management. The detector has been optimised for personal monitoring and offers maximum safety at low operating costs.Scope of delivery:X-am®2800 gas detector (without charger, without sensors, without battery)
Gas detector X-am®2800, Set
The X-am® 2800 multi-gas detector measures up to four gases and is equipped with a particularly shock-resistant CatEx sensor. With the Dräger Gas Detection Connect software, it offers live data transmission and powerful fleet management. The detector has been optimised for personal monitoring and offers maximum safety at low operating costs.Scope of delivery:X-am®2800 gas detector with battery, charger, sensors: Ex, O2, CO, H2S
Handheld photometer pHotoFlex® pH
Handheld photometers for use in a wide range of areas such as process control, mobile water testing or wine industry. Easy operation with menu driven, user guidance. Just like the standard version of pHotoFlex® STD plus full electrochemical pH-and ORP measurement via electrodes. This allows also the measurement of the parameters NH3 and CO2.pH 0 to 16.00 (±0.01) for Standard-DIN pH-electrodes with automatic temperature compensation ATC and automatic buffer recognitionSmart cuvette adapter: holds 28 mm or 16 mm round cuvettes with height 91 to 104 mm; to be used with a variety of different test typesOptics: LED's with filtersConcentration, Absorption, TransmissionMethods can be downloaded from the Internet100 user defined routines1000 data setsRS 232 interface1 to 3 point calibrationIncl. calibration interval and calibration protocolScope of supply: Handheld photometer, 1 x empty cuvette 16 mm, 2 x empty cuvette 28 mm, batteries, operating manual
Handheld photometer pHotoFlex® pH Field case set
Handheld photometers for use in a wide range of areas such as process control, mobile water testing or wine industry. Easy operation with menu driven, user guidance. Just like the standard version of pHotoFlex® STD plus full electrochemical pH-and ORP measurement via electrodes. This allows also the measurement of the parameters NH3 and CO2.pH 0 to 16.00 (±0.01) for Standard-DIN pH-electrodes with automatic temperature compensation ATC and automatic buffer recognitionSmart cuvette adapter: holds 28 mm or 16 mm round cuvettes with height 91 to 104 mm; to be used with a variety of different test typesOptics: LED's with filtersConcentration, Absorption, TransmissionMethods can be downloaded from the Internet100 user defined routines1000 data setsRS 232 interface1 to 3 point calibrationIncl. calibration interval and calibration protocolScope of supply: Handheld photometer in field case with table insert, 0.500 to 5 ml pipette, pH electrode SenTix® 41, technical buffer solution 7.00 and 4.01, 50 ml KCl, 16 mm zero cuvette, waterproof quick guide with all programmed test sets, microfibre cloths, LSdata PC software, PC connection cable AK 540/B, screwdriver, 50 ml measuring beaker, 5 x 28 mm cuvettes, batteries, operating manual
Handheld photometer pHotoFlex® STD
Handheld photometers for use in a wide range of areas such as process control, mobile water testing or wine industry. Easy operation with menu driven, user guidance.Water analysis purely without pH and turbidity measurement for standard parametersSmart cuvette adapter: holds 28 mm or 16 mm round cuvettes with height 91 to 104 mm; to be used with a variety of different test typesOptics: LED's with filtersConcentration, Absorption, TransmissionMethods can be downloaded from the Internet50 user defined routines100 data setsRS 232 interfaceScope of supply: Handheld photometer, 1 x empty cuvette 16 mm, 2 x empty cuvette 28 mm, batteries, operating manual
Handheld photometer pHotoFlex® STD Field case set
Handheld photometers for use in a wide range of areas such as process control, mobile water testing or wine industry. Easy operation with menu driven, user guidance.Water analysis purely without pH and turbidity measurement for standard parametersSmart cuvette adapter: holds 28 mm or 16 mm round cuvettes with height 91 to 104 mm; to be used with a variety of different test typesOptics: LED's with filtersConcentration, Absorption, TransmissionMethods can be downloaded from the Internet50 user defined routines100 data setsRS 232 interfaceScope of supply: Handheld photometer in field case with table insert, 2 x 2 ml + 10 ml scaled syringes, 16 mm zero cuvette, waterproof quick guide with all programmed test sets, microfibre cloths, LSdata PC software, PC connection cable AK 540/B, screwdriver, 50 ml measuring beaker, 5 x 28 mm cuvettes, batteries, operating manual
Handheld photometer pHotoFlex® Turb
Handheld photometers for use in a wide range of areas such as process control, mobile water testing or wine industry. Easy operation with menu driven, user guidance. With pH and turbidity measurement.pH 0 to 16.00 (±0.01) for Standard-DIN pH-electrodes with automatic temperature compensation ATC and automatic buffer recognitionTurbidity measuring range: 0.01 to 1100 NTU/FNUTurbidity accuracy: ±0.01 NTU or 2 % of measured valueSmart cuvette adapter: holds 28 mm or 16 mm round cuvettes with height 91 to 104 mm; to be used with a variety of different test typesOptics: LED's with filtersIR light source acc. DIN 27027/ISO 7027Concentration, Absorption, TransmissionMethods can be downloaded from the Internet100 user defined routines1000 data setsRS 232 interface3 point calibrationIncl. calibration interval and calibration protocolScope of supply: Handheld photometer, 1 x empty cuvette 16 mm, 2 x empty cuvette 28 mm, turbidity standard AMCO®-Clear, batteries, operating manual
Handheld photometer pHotoFlex® Turb Field case set
Handheld photometers for use in a wide range of areas such as process control, mobile water testing or wine industry. Easy operation with menu driven, user guidance. With pH and turbidity measurement.pH 0 to 16.00 (±0.01) for Standard-DIN pH-electrodes with automatic temperature compensation ATC and automatic buffer recognitionTurbidity measuring range: 0.01 to 1100 NTU/FNUTurbidity accuracy: ±0.01 NTU or 2 % of measured valueSmart cuvette adapter: holds 28 mm or 16 mm round cuvettes with height 91 to 104 mm; to be used with a variety of different test typesOptics: LED's with filtersIR light source acc. DIN 27027/ISO 7027Concentration, Absorption, TransmissionMethods can be downloaded from the Internet100 user defined routines1000 data setsRS 232 interface3 point calibrationIncl. calibration interval and calibration protocolScope of supply: Handheld photometer in field case with table insert, 0.500 to 5 ml pipette, pH electrode SenTix® 41, technical buffer solution 7.00 and 4.01, 50 ml KCl, Standard set with traceable AMCO® Standards (0.02 - 10 - 1000 NTU), 16 mm zero cuvette, waterproof quick guide with all programmed test sets, microfibre cloths, LSdata PC software, PC connection cable AK 540/B, screwdriver, 50 ml measuring beaker, 5 x 28 mm cuvettes, batteries, operating manual
Hardness Test Kits
The test kits have been specially developed for the analysis of boiler, cooling and service water.
HCL-Absorber, for COD determination
The glass filter devices are made of borosilicate glass 3.3 and can withstand acids, alkalis and solvents and even temperatures of up to 540 °C.
Heads for Centrifuge Super Vario-N
Head A:for fat determination according to Gerber for max. 36 butyrometer buckets orfor fat determination according to Babcock for max. 18 Babcock bucketsHead B:for fat determination according to Röse-Gottlieb, for max. 8 Mojonnier tubesHead C:for the determination of solubility, for max. 6 buckets for solubility index tubes ADPI
Hydrolysis/crude fibre separation set , behrotest
behrotest® Hydrolysis apparatus, complete with:Serial heating unit with individually adjustable heating placesCooling water distribution with condenser rack and hosesBeakers (600ml), cold fingers
Ice cream and condensed milk butyrometer, borosilicate glass
Ice cream and condensed milk butyrometer according to Roeder’s weighing method.
Ice Cream Butyrometer Koehler
Volumetric method for 5 ml cream, closed bulb with frosted label, plain neck, without stopper
Imhoff Sedimentation cones, borosilicate glass 3.3
Manufactured from borosilicate glass 3.3 according to sedimentation tests according to DIN 12672 standard. Featured with volume graduation of 1000 ml. Volume graduations and inscriptions are printed with white enamel.
