Dry Milk Butyrometer Teichert with Accessories
Weighing method for 2,5 g dry milk, closed bulb with frosted label, with rubber stopper and glass nail.
Exhaust Device, borosilicate
Filter mountings, 400 ml, with threadPP funnels with threadSlotted sieve plate with 2 gasketsStainless steel rackWater jet pump
Extraction and filter thimbles
Schleicher & Schuell MicroScience thimbles are the standard for reproducible analytical results. An excellent fit in the apparatus is ensured through carefully controlled dimensions. Selected raw materials ensure that the thimbles are ideal for all analytical routine processes to obtain reproducible results without influencing the sample.For decades, thimbles from Schleicher & Schuell MicroScience have been known for their constant high quality and purity. In addition to the following standard thimbles which are ideal for Soxhlet extraction, Schleicher & Schuell MicroScience offers alternative dimensions on request.
Extraction apparatuses acc. to Soxhlet, with Dimroth condenser, DURAN® tubing
The complete apparatuses are consisting of: extractor in compact and robust design, with flask connection NS 29/32, made of DURAN® tubing, Dimroth condenser, with thread GL 14, made of DURAN® tubing, round bottom flask, material: DURAN®
Extraction thimbles MN 645 D, cellulose
Extraction thimbles are used for holding solid materials, from which certain substances are to be extracted with a suitable solvent. Additionally, extraction thimbles are used in the fields of air and waste gas analysis for collecting solid particles. With lid.
Extraction thimbles MN 645 F, cellulose
Extraction thimbles are used for holding solid materials, from which certain substances are to be extracted with a suitable solvent. Additionally, extraction thimbles are used in the fields of air and waste gas analysis for collecting solid particles. Denser than MN 645.
Extraction thimbles MN 645 R, pure cellulose
Extraction thimbles are used for holding solid materials, from which certain substances are to be extracted with a suitable solvent. With sealing collar and two finger recesses on opposite sides of the collar, for dust analysis in industrial gases, exhaust gases and room air.
Extraction thimbles MN 645, pure cellulose
Fat determination in food and feedDetermination of binder content in asphaltAnalysis of soil contaminantsDetermination of additives in rubber and elastomers
Extraction Thimbles MN 649, micro glass fibre
Pollution monitoring, air samplingHigh temperature filtration (up to 500 °C)For solvents incompatible with cellulose thimbles (for example strong acids or bases)
Extraction thimbles, Borosilicate glass
Recommended for Soxhlet extraction with solvents, which are incompatible with cellulose fibres and for filtration of air and gas streams.Made of 100 % pure borosilicate fibres, without binding elementsHigh loading capacity and highly permeable to airThickness is 1.5 mm (diameter < 33 mm)High retention of small particles, > 99 % according to BS 4400Good stability at high temperatures up to 500 °CRecommended for hot, moist, and acidic gasesGravimetric determination of particles in hot gasesFurther sizes on request.
Extraction Thimbles, cellulose
For reliable and fast analysis in the areas of food control and environmental monitoring. Suitable for Soxhlet-type, Tecator-type or similar devices, to extract certain components out of solid material with an appropriate solvent.Made of pure cellulose that is totally free from binding elementsHigh purity of selected cellulose guarantees reliable and replicable resultsThe consistent high porosity ensures fast flow throughHigh fitting accuracy for all available extraction systemsWall thickness 1.3 mm at thimbles with ≤35 mm inner diameter, 1.7 mm at thimbles with >35 mm inner diameterFor two systemsGrade 900: Soxhlet Extraction, Grade 901: Tecator Extraction
Extraction thimbles, Cellulose
Supplied in packs of 25. Dimensions given are nominal internal diameter x external length in mm.
Extraction Thimbles, Grade 603 G, glass fibre
Resistant to temperatures up to 500 °CAnalysis of hot and acidic gases, including emission control and smoke stack gas monitoringSoxhlet extractionAnalysis of pesticide residuesDetermination of oil/fat content of foodsAnalysis of oil and grease in solid wastes
Extraction Unit for the Randall Method
Manual apparatus for hot extraction according to Randall. Several times faster than a customary Soxhlet extraction. Incl. 1 set of extraction thimbles, 100 ml.Optimal safety thanks to screw-fastened extraction unitsMultiple position extraction units:Every extraction thimble with sample can be independently adjustedThe user can lower and raise all the extraction units into/out of the heating chamber with a single leverEvery heating position has a separate temperature controlSpecificationsDimensions (H x W x D, cm):approx. 81 x 55 x 63Weight, kg:approx. 32Voltage:230V 50Hz a.c.Power consumption:Max. 1500W
Extractors acc. to Knöfler-Böhm, DURAN® tubing
The condensate passes the extraction sample and flows back into the flask continuously without interrupting the extraction process, i.e. the solvent is recirculated continuously.The complete apparatus consists of:Jacketed extractor head made of DURAN® tubing, Dimroth condenser with thread GL 14, made of DURAN® tubing,Round bottom flask material: DURAN®
Extractors for Soxhlet extraction
Extractors with specially developed siphon tubes guarantee uniform extraction cycles. Extractors with stopcock (type H) eliminate the additional distillation after extraction.
Filtering Funnel for Milk Powder Samples
Made of stainless steel, funnel volume 500ml. Connection to faucet creates a vacuum and thereby accelerates the filtration.Included in delivery:1 x Filtering funnel1 x Filter sieve, diam. 28 mm3 x Gaskets1 x Water jet pump1 x PVC tubing, diam. 10/14mm, length 2m
Filtration Device for Crude Fibre separation
e.g. to determine the raw fibre content according to EN ISO6865
Flocculation tester ET 730 / ET 740 / ET 750, bench top
Designed for efficiency testing of flocculation or precipitation agents.For use in laboratories. Model ET 730 portableIlluminated back panel for glare-free observation of the samplesModels ET 740 and ET 750 with continuously variable stirring speedSpeed of ET 730 can be adjusted to 20, 40, 50, 100 and 200 min-1Timer feature and digital displayHeight adjustment of the stirring blades during operationFor beakers with 1000 to 1500 ml volume, tall and low formSpecificationsSpeed controlAL30: AL40 + AL50:20, 40, 50, 100, 120 min-1 10 ... 300 min-1 (stepless)TimerAL30: AL40 + AL50:0 ... 30 minutes (continuous) 0 ... 999 min or 0 ... 99 h (continuous)Power Supply:100 ... 240 V, 50/60 Hz
Flocculation testers FJT-200D
For flocculation tests of water and waste water.choice of 2- or 6-bank modelsdigital speed displaytwo adjustable speed presetsaccurate and reproducible speedsdiffused base illumination with black backgroundaccepts beakers up to 1000ml.Adjustable speed range 25 to 250rpm. Dimensions (H x W x D): 460 x 320 x 220mm (two-bank model) 460 x 750 x 220mm (six-bank model). For 230 V 50 Hz, single phase supplies. Supplied with rotor blades but without beakers.With BioCote silver based antimicrobial protection.
Flocculator FC S
The analogue flocculator was specially designed for coagulation and flocculation determinations in water treatment analysis. The device offers independently controllable stirring positions so that different conditions can be tested and simulated simultaneously. With the ergonomic knobs, selectable speeds (10-15-30-45-60-90-120-150-200-300 min-1) can be set at each position. The robust brushless motor delivers precise and reproducible stirring speeds and thanks to SpeedServo™ torque compensation technology, the speed remains constant even if the viscosity of the sample changes. The illuminated back panel improves sample visibility during the flocculation process and makes it easy to observe results in real time. Stainless steel stirring rods are adjustable in height.