LLG-Centrifuge tubes, PP
Polypropylene tubes with very good thermal, mechanical and chemical stability. With screw closures. Sterile tubes with screwed-on closure. Packed in boxes or bags. With graduations and labelling area.Sterile centrifuge tubes are free of cytotoxicity, DNase/RNase-free and human DNA-free.For research and development only.
LLG-Deep well plates, 384-well, PP
384 square wellsPyramidal well bottom for optimal sample retrievalRaised rims for optimal sealing and reduced risk of cross-contaminationRaised rims on the corners to protect edges of sealsChemical resistant (e.g. against DMSO, Phenol, Chloroform)Autoclavable (121 °C)Virgin polypropyleneCertified RNase, DNase and endotoxin freeProduced in a cleanroom environment
LLG-Deep-well storage plates, 96-well, PP
Suitable for test preparation and for storage and transport of samples.ClearProduced under clean room conditionsCompatible with automated systemsRNase und DNase free
LLG-Dual-Position caps for test and centrifuge tubes, HDPE
The LLG-Dual-Position cap can seal test and centrifuge tubes in two ways:Closed, but air-permeable for aerobic growth conditionsHermetically sealed for anaerobic growth conditions. Also ideal for safe centrifugation, storage or transport of samples
LLG-Microcentrifuge tubes, PP
LLG-Microcentrifuge tubes are ideal for all test throughputs. These centrifuge tubes are very resistant to mechanical strain and highly resistant to temperature fluctuations and chemicals. The tubes have graduation marks for quick and easy volume checks. The ergonomic cap design with click-lock mechanism ensures a secure seal and makes opening and closing easier. With frosted labelling area on the housing.Certified DNase-, RNase-, and pyrogen-free. Guaranteed metal-free. Suitable for microbiology.
LLG-Microcentrifuge tubes, PP, with Safe-Lock lid
LLG-Microcentrifuge tubes are versatile and suitable for general laboratory applications such as incubation, centrifugation, and storage of samples. With tight-fitting Safe-Lock lid, which prevents unintentional opening of the lid during centrifugation.Frosted labelling area on the lidLid membrane can be easily piercedEasy opening and closing with one handGraduation lines for visual volume controlRNase- and DNase-freeTemperature range -86 up to 121 °C
LLG-Sealing mats for Deep well plates, 96-well
for sample storagealphanumeric gridthermoplastic elastomerflexible with end tabs
LLG-Test and centrifuge tubes with rim, PP
Ideal for all laboratory applications in the intermediate volume range up to 12 ml, such as incubation, centrifugation or sample preparation.Tube made of transparent PS or opaque PPRound bottomGraduatedLarge writing areaMax. temperature 120 °CPlease order matching Dual-Position caps separately.
LLG-Test and centrifuge tubes with rim, PS
Ideal for all laboratory applications in the intermediate volume range up to 12 ml, such as incubation, centrifugation or sample preparation.Tube made of transparent PS or opaque PPRound bottomGraduatedLarge writing areaMax. temperature 80 °CPlease order matching Dual-Position caps separately.
Micro test tubes, PP
Suitable for biological examination, e.g. PCR, cell uptake studies, RIA, EIA, etc. Functional design for storing, freezing and transporting reagents and samples. Compatible with standard microtitre plates and suitable for work with multi-channel pipettes.Autoclavable at 121 °C (2 bar), according to DIN EN 285Suitable for storage up to -80 °CBIO-CERT® CERTIFIED QUALITY
Micro test tubes, PP, strips of 8
Suitable for biological examination, e.g. PCR, cell uptake studies, RIA, EIA, etc. Functional design for storing, freezing and transporting reagents and samples. Compatible with standard microtitre plates and suitable for work with multi-channel pipettes.Autoclavable at 121 °C (2 bar), according to DIN EN 285Suitable for storage up to -80 °CBIO-CERT® CERTIFIED QUALITY
Micro Tubes EasyFit with Cap, PP
High resistance to temperatures and chemicalsAutoclavable at 121 °C / 2.1 bar (cap not closed)Place for markings on label area and flat coverMembrane can be punctured by sampling-needlesGraduationRound inside bottom for easy recovery of pellets or fluidsMade from clear polypropyleneEasy closure, for example for use in the chemical laboratories of a hospital
Micro Tubes with Cap, PP
Quick to open and leak-tight when closed, they are used in a myriad of applications. They are essential components of scientific investigations and diagnostic tests or in the storage nd filling of reagents. They are as resistant to heat and subzero temperatures as they are to chemicals and mechanical stress.
Micro tubes, PP, with attached screw cap, PE, with sealing cone
Reaction tubes with attached cover reduce the danger of contamination or mistakes due to mixing up covers. The sealing cone of the cover lies seamlessly against the interior of the tube, preventing the contents from coming into contact with the thread.UngraduatedOperating range -90 °C to 100 °CAttached covers are suitable for colored cover inserts (available separately)BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, Pyrogens and PCR-Inhibitors
Micro tubes, PP, with attached screw cap, PE, with silicone seal
Reaction tubes with attached cover reduce the danger of contamination or mistakes due to mixing up covers. The silicone ring in the cover provides an optimal seal for the reaction tube without coming into contact with the contents of the reaction tube itself. Tubes are suitable for storing liquid nitrogen in the gas phase.With matte label fieldOperating range -196 °C to 121 °CSuitable for autoclaving under DIN EN 285, at 121 °C (2 bar)BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, Pyrogens and PCR-Inhibitors
Micro tubes, PP, without screw cap
Operating range: -196 °C to 121 °CAutoclavable at 121 °C (2 bar), acc. DIN EN 285BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors
Micro tubes, PP, without screw cap, ungraduated
Suitable for tamper-evident coverOperating range: -196 °C to 121 °CAutoclavable at 121 °C (2 bar), acc. DIN EN 285BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors
Microcentrifuge tubes, PP, with lid locking
The microcentrifuge tubes are available with an additional lid locking to achieve especially effective sealing and prevent accidental opening.GraduatedWith attached lidAutoclavable at 121 °C (2 bar), acc. to DIN EN 285BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors
Microtubes, PP, with screw-cap, PP
With silicone sealMatt label fieldOperating range: -196 °C to 121 °CAutoclavable at 121°C (2 bar), acc. to DIN EN 285BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors
Microtubes, PP, with screw-cap, PP, with lid closure
With silicone sealMatt label fieldOperating range: -196 °C to 121 °CAutoclavable at 121°C (2 bar), acc. to DIN EN 285BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors
Protein LoBind Tubes, with screw cap
Minimum protein loss (less than 3%, BSA 1µg/ml)No surface coating, e.g. siliconeFree of DNA, DNase, RNase and PCR inhibitors (PCR clean)Novel PP manufactured under optimized conditionsHighly transparent
Protein LoBind Tubes, with snap-on lid
Minimum protein loss (less than 3%, BSA 1µg/ml)No surface coating, e.g. siliconeFree of DNA, DNase, RNase and PCR inhibitors (PCR clean)Novel PP manufactured under optimized conditionsHighly transparent
