Eppendorf Tubes® 5.0 mL, PP, with screw cap, Forensic DNA Grade
Simple, practical and ergonomic single-hand operationLarge labelling areaCertified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur® purity levelsMaximum safety and stability for centrifugation up to 25000 x gCompatible with accessories for conical 15 ml tubes - many existing adapters and racks can be usedOperating temperature range -86 °C to 100 °C
Eppendorf Tubes® 5.0 mL, starter pack, with snap caps
Simple, practical and ergonomic single-hand operationLarge labelling areaCertified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur® purity levelsMaximum safety and stability for centrifugation up to 25000 x gCompatible with accessories for conical 15 ml tubes - many existing adapters and racks can be usedSimple, practical and ergonomic single-hand operationLarge labelling areaHinged lid for minimized sample evaporation during storage and incubation in a wide range of temperatures from -86°C to 80°CMaximum safety and stability for centrifugation up to 25000 x gFree of human DNA, free of DNase and RNase, free of PCR inhibiting agentsFor PCR preparations or any reactions where DNase or RNase could interfere with the reaction or analysisFrom 80 °C on, please use tube clips (cat. no. 9.409 294)Scope of supply:400 Eppendorf Tubes® 5.0 mL, PCR clean (Certified purity grade), 8 universal adapters for rotors with bores for 15 ml conical tubes, 2 tube racks 5.0 mL (12 spaces, white)
Eppendorf Tubes® BioBased, PP, with screw cap, HDPE
Eppendorf Tubes® BioBased are made of 90 % bio-based plastic. In the bio-based polymer production, fossil raw material is replaced with sustainable raw material produced from bio-based waste and residues. For cell culture and cell biology applications, as well as for sample preparation in microbiology and molecular biology laboratories.SterilePyrogen-, DNase-, RNase- and DNA-freeLid with grooved sidesLarge labeling fieldISCC PLUS and ACT certification
Eppendorf Tubes®, PP, amber, with screw cap, HDPE
For cell culture applications, sample preparation and storage of samples and solutions.ConicalTemperature resistant from -86 °C to 100 °CFor light-sensitive samples
Eppendorf Tubes®, PP, with 2D SafeCode
Eppendorf Tubes® with two-level coding (clear coding, 2D datamatrix code) for safe sample identification. Code reading is possible even up to 30 % damaged code. Data processing software is optionally available, further information on request. SterileConicalWith screw capPyrogen-, DNase-, RNase- and DNA-freePre-coded for immediate useTemperature range: -86 °C to 121 °C
Filtration microplates, UniFilter® 800, CA 0.45 µm
Well capacity: 800 µl. Drip director type long.Well capacity: 800 µl. Drip director type long.
Filtration microplates, UniFilter® 800, DNA
Well capacity: 800 µl. Drip director type long.Well capacity: 800 µl. Drip director type long.
Filtration microplates, UniFilter® 800, GF/B
Well capacity: 800 µl. Drip director type long.Well capacity: 800 µl. Drip director type long.
Filtration microplates, UniFilter® 800, GF/C
Well capacity: 800 µl. Drip director type long.Well capacity: 800 µl. Drip director type long.
Lids for micro test tubes, PE
For 1.2 ml tubes. Caps are free from RNase, DNase and DNA.
LLG-Centrifuge tubes economy, PP
With flat PE capsWith conical bottom (15 and 50 ml) or with self-standing bottom (50 ml)Easy-to-read black volume graduationsWith a large frosted writing areaEngraved graduation at the conical bottom of each tubeMax. rotate speed up to 12000 x g for conical bottom tubes and 6000 x g for self-standing tubesAutoclavable at 121 °C and freezable to -80 °CLeak-proofFree of pyrogensDNase/RNase-freeAseptically or sterileFor research and development only.
LLG-Centrifuge tubes, 5 ml, PP, with Safe-Lock lid
LLG-Centrifuge tubes are versatile and suitable for general laboratory applications such as incubation, centrifugation, and storage of samples. With tight-fitting Safe-Lock lid, which prevents unintentional opening of the lid during centrifugation.Frosted labelling area on the lidLid membrane can be easily piercedEasy opening and closing with one handGraduation lines for visual volume controlRNase- and DNase-freeTemperature range -86 up to 121 °C
LLG-Centrifuge tubes, PP
Polypropylene tubes with very good thermal, mechanical and chemical stability. With screw closures. Sterile tubes with screwed-on closure. Packed in boxes or bags. With graduations and labelling area.Sterile centrifuge tubes are free of cytotoxicity, DNase/RNase-free and human DNA-free.For research and development only.
LLG-Deep well plates, 384-well, PP
384 square wellsPyramidal well bottom for optimal sample retrievalRaised rims for optimal sealing and reduced risk of cross-contaminationRaised rims on the corners to protect edges of sealsChemical resistant (e.g. against DMSO, Phenol, Chloroform)Autoclavable (121 °C)Virgin polypropyleneCertified RNase, DNase and endotoxin freeProduced in a cleanroom environment
LLG-Deep-well storage plates, 96-well, PP
Suitable for test preparation and for storage and transport of samples.ClearProduced under clean room conditionsCompatible with automated systemsRNase und DNase free
LLG-Dual-Position caps for test and centrifuge tubes, HDPE
The LLG-Dual-Position cap can seal test and centrifuge tubes in two ways:Closed, but air-permeable for aerobic growth conditionsHermetically sealed for anaerobic growth conditions. Also ideal for safe centrifugation, storage or transport of samples
LLG-Microcentrifuge tubes, PP
LLG-Microcentrifuge tubes are ideal for all test throughputs. These centrifuge tubes are very resistant to mechanical strain and highly resistant to temperature fluctuations and chemicals. The tubes have graduation marks for quick and easy volume checks. The ergonomic cap design with click-lock mechanism ensures a secure seal and makes opening and closing easier. With frosted labelling area on the housing.Certified DNase-, RNase-, and pyrogen-free. Guaranteed metal-free. Suitable for microbiology.
LLG-Microcentrifuge tubes, PP, with Safe-Lock lid
LLG-Microcentrifuge tubes are versatile and suitable for general laboratory applications such as incubation, centrifugation, and storage of samples. With tight-fitting Safe-Lock lid, which prevents unintentional opening of the lid during centrifugation.Frosted labelling area on the lidLid membrane can be easily piercedEasy opening and closing with one handGraduation lines for visual volume controlRNase- and DNase-freeTemperature range -86 up to 121 °C
LLG-Sealing mats for Deep well plates, 96-well
for sample storagealphanumeric gridthermoplastic elastomerflexible with end tabs
LLG-Test and centrifuge tubes with rim, PP
Ideal for all laboratory applications in the intermediate volume range up to 12 ml, such as incubation, centrifugation or sample preparation.Tube made of transparent PS or opaque PPRound bottomGraduatedLarge writing areaMax. temperature 120 °CPlease order matching Dual-Position caps separately.
LLG-Test and centrifuge tubes with rim, PS
Ideal for all laboratory applications in the intermediate volume range up to 12 ml, such as incubation, centrifugation or sample preparation.Tube made of transparent PS or opaque PPRound bottomGraduatedLarge writing areaMax. temperature 80 °CPlease order matching Dual-Position caps separately.
Micro test tubes, PP
Suitable for biological examination, e.g. PCR, cell uptake studies, RIA, EIA, etc. Functional design for storing, freezing and transporting reagents and samples. Compatible with standard microtitre plates and suitable for work with multi-channel pipettes.Autoclavable at 121 °C (2 bar), according to DIN EN 285Suitable for storage up to -80 °CBIO-CERT® CERTIFIED QUALITY
Micro test tubes, PP, strips of 8
Suitable for biological examination, e.g. PCR, cell uptake studies, RIA, EIA, etc. Functional design for storing, freezing and transporting reagents and samples. Compatible with standard microtitre plates and suitable for work with multi-channel pipettes.Autoclavable at 121 °C (2 bar), according to DIN EN 285Suitable for storage up to -80 °CBIO-CERT® CERTIFIED QUALITY
Micro Tubes EasyFit with Cap, PP
High resistance to temperatures and chemicalsAutoclavable at 121 °C / 2.1 bar (cap not closed)Place for markings on label area and flat coverMembrane can be punctured by sampling-needlesGraduationRound inside bottom for easy recovery of pellets or fluidsMade from clear polypropyleneEasy closure, for example for use in the chemical laboratories of a hospital
Micro Tubes with Cap, PP
Quick to open and leak-tight when closed, they are used in a myriad of applications. They are essential components of scientific investigations and diagnostic tests or in the storage nd filling of reagents. They are as resistant to heat and subzero temperatures as they are to chemicals and mechanical stress.
Micro tubes, PP, with attached screw cap, PE, with sealing cone
Reaction tubes with attached cover reduce the danger of contamination or mistakes due to mixing up covers. The sealing cone of the cover lies seamlessly against the interior of the tube, preventing the contents from coming into contact with the thread.UngraduatedOperating range -90 °C to 100 °CAttached covers are suitable for colored cover inserts (available separately)BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, Pyrogens and PCR-Inhibitors
Micro tubes, PP, with attached screw cap, PE, with silicone seal
Reaction tubes with attached cover reduce the danger of contamination or mistakes due to mixing up covers. The silicone ring in the cover provides an optimal seal for the reaction tube without coming into contact with the contents of the reaction tube itself. Tubes are suitable for storing liquid nitrogen in the gas phase.With matte label fieldOperating range -196 °C to 121 °CSuitable for autoclaving under DIN EN 285, at 121 °C (2 bar)BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, Pyrogens and PCR-Inhibitors
Micro tubes, PP, without screw cap
Operating range: -196 °C to 121 °CAutoclavable at 121 °C (2 bar), acc. DIN EN 285BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors
Micro tubes, PP, without screw cap, ungraduated
Suitable for tamper-evident coverOperating range: -196 °C to 121 °CAutoclavable at 121 °C (2 bar), acc. DIN EN 285BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors
Microcentrifuge tubes, PP, with lid locking
The microcentrifuge tubes are available with an additional lid locking to achieve especially effective sealing and prevent accidental opening.GraduatedWith attached lidAutoclavable at 121 °C (2 bar), acc. to DIN EN 285BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors
Microtubes, PP, with screw-cap, PP
With silicone sealMatt label fieldOperating range: -196 °C to 121 °CAutoclavable at 121°C (2 bar), acc. to DIN EN 285BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors
Microtubes, PP, with screw-cap, PP, with lid closure
With silicone sealMatt label fieldOperating range: -196 °C to 121 °CAutoclavable at 121°C (2 bar), acc. to DIN EN 285BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR inhibitors
Protein LoBind Tubes, with screw cap
Minimum protein loss (less than 3%, BSA 1µg/ml)No surface coating, e.g. siliconeFree of DNA, DNase, RNase and PCR inhibitors (PCR clean)Novel PP manufactured under optimized conditionsHighly transparent
Protein LoBind Tubes, with snap-on lid
Minimum protein loss (less than 3%, BSA 1µg/ml)No surface coating, e.g. siliconeFree of DNA, DNase, RNase and PCR inhibitors (PCR clean)Novel PP manufactured under optimized conditionsHighly transparent
