Cytocentrifuges Cellspin® I
Cytocentrifuge system for producing cell preparations in cytology, urology, microbiology, haematology, immunocytochemistry, virology and oncology. Suitable for small and large volumes.Large selection of cytocentrifuges, rotors and accessories for a variety of applicationsAvailable as 4-, 8- and 12-position centrifugeSwitchable between RPM and RCF"Quickchange" for quick and easy rotor exchangeModels with closed rotors for enhanced safetyUpgradable with increasing requirementsUp to 24 samples per run when using the Double Cellfunnel®EASY rotors as a perfect compliment to the Shandon ™ Cytospin ™Monolayer filter card systemCells are deposited on a surface with a diameter of 6 mm or 22 x 15 mm.Scope of supply: Centrifuge with 4-position standard rotor, Disposable-Starter-Kit incl. CellClip, Disposable Single Cellfunnel® and slides
Cytology slides Shandon™ Cytoslides™, double-ring
Slides with blue labelling field and ground edges. The blue rings on the front have a diameter of 13 mm and mark the cell deposition area for efficient and rapid localisation of the sample.
Cytology slides Shandon™ Cytoslides™, single-ring
Slides with white labelling field and ground edges. The white ring has a diameter of 13 mm and marks the cell deposition area for efficient and rapid localisation of the sample.
Disposable Erlenmeyer Flasks Nalgene™ with screw closure, PETG, sterile, with baffled bottom
Sterile disposable flasks with white HDPE closure reduce the chance for cross contamination. Ideal for shaker and suspension cell culture, media preparation or storage. Made of light, crystal clear PETG plastic. Molded-in graduations. Leak-proof HDPE screw closures open to vent with 1/4 turn. Flasks offer a 5-year shelf life, a 10-6 SAL, are non-pyrogenic and non-cytotoxic. Individually packaged for easy storage and handling.
Disposable Erlenmeyer Flasks Nalgene™ with screw closure, PETG, sterile, with flat bottom
Sterile disposable flasks with white HDPE closure reduce the chance for cross contamination. Ideal for shaker and suspension cell culture, media preparation or storage. Made of light, crystal clear PETG plastic. Molded-in graduations. Leak-proof HDPE screw closures open to vent with 1/4 turn. Flasks offer a 5-year shelf life, a 10-6 SAL, are non-pyrogenic and non-cytotoxic. Individually packaged for easy storage and handling.
Disposable Erlenmeyer Flasks Nalgene™ with vented closure, PETG, sterile, with baffled bottom
With blue vented closure, the chance for cross contamination is reduced. Ideal for shaker and suspension cell culture, media preparation or storage. Made of light, crystal clear PETG. Molded-in graduations. Leak-proof HDPE closure has a hydrophobic 0.2µm PTFE membrane that allows sterile air exchange. Flasks offer a 5-year shelf life, a 10-6 SAL, are non-pyrogenic and non-cytotoxic. Individually packaged for easy storage and handling.
Disposable Erlenmeyer Flasks Nalgene™ with vented closure, PETG, sterile, with flat bottom
With blue vented closure, the chance for cross contamination is reduced. Ideal for shaker and suspension cell culture, media preparation or storage. Made of light, crystal clear PETG. Molded-in graduations. Leak-proof HDPE closure has a hydrophobic 0.2 µm PTFE membrane that allows sterile air exchange. Flasks offer a 5-year shelf life, a 10-6 SAL, are non-pyrogenic and non-cytotoxic. Individually packaged for easy storage and handling.
Disposable filter cards for TPX Single sample chamber Shandon™
Highly absorbent disposable filter cards for use with the TPX sample chamber. With 2 holes.White filter card for high absorbencyBrown filter card for slower absorption
Double cyto funnel Shandon™ Double Cytofunnel™, with white filter card
Disposable sample chamber for producing thin-layer preparations by centrifugation. With white filter card and cap. Ideal for immunochemical techniques.For sample volumes from 0.05 to 0.25 ml per chamberTwo sample deposition areas, each with Ø 6 mm (28 mm2)Funnel marking corresponds to the slide marking for easy sample identificationPre-attached white filter card for high absorbencyPlease order slide clip for holding the cyto funnels separately.
Double cyto funnel Shandon™ EZ Double Cytofunnel™, with white filter card
Disposable sample chamber for producing thin-layer preparations by centrifugation. With white filter card and cap. Ideal for immunochemical techniques.For sample volumes from 0.05 to 0.25 ml per chamberTwo sample deposition areas, each with Ø 6 mm (28 mm2)Funnel marking corresponds to the slide marking for easy sample identificationPre-attached white filter card for high absorbencyReduces the risk of exposure to pathogenic samplesDisposable product eliminates the need for time-consuming decontamination and cleaningDecreases the possibility of cross-contaminationNo slide clips required
EasyFill™ Cell Factory System Accessories, HDPE
It is now easy to create a Thermo Scientific Nunc EasyFill™ Cell Factory system for your applications.Connections made easy: Plug a media bag or tubing set to any cell factory.Save time and reduce costs: Minimise cleaning processes and sterility validations. Accessories are gamma irradiated and individually wrapped.Prevent build up of back pressure during filling application: New venting options provide additional air venting when filling and harvesting by gravity or with a peristaltic pump.
Erlenmeyer flasks CellSafeTM
With vent capISO 13485 and ISO 9001 certifiedProduced in class 100000 clean roomsMade with USP Class VI standards medical-grade raw materialsGMP compliantMarked with batch numberTriple-bagged packagingSterilised by irradiation, SAL 10-6DNase/RNase-free, pyrogen-free, non-cytotoxic
Erlenmeyer flasks Nalgene™, PMP
PMP with PP screw closure. Transparent. Chemical-resistant. Impact-resistant. Autoclavable. Permeable to microwaves. Screw off closure before autoclaving.
Erlenmeyer flasks, PC, sterile, with baffled bottom and standard cap
For cultivation of cell lines with high requirements on oxygen, suspension cell cultures and sample storage.Non-treatedGraduatedSterilised by gamma irradiationDNase-, RNase-freePyrogen-freeTemperature range: -80 °C to 121 °C
Erlenmeyer flasks, PC, sterile, with baffled bottom and vent cap
For cultivation of cell lines with high requirements on oxygen, suspension cell cultures and sample storage.Non-treatedGraduatedSterilised by gamma irradiationDNase-, RNase-freePyrogen-freeTemperature range: -80 °C to 121 °C
Erlenmeyer flasks, PC, sterile, with plain bottom and standard cap
For cultivation of cell lines with high requirements on oxygen, suspension cell cultures and sample storage.Non-treatedGraduatedSterilised by gamma irradiationDNase-, RNase-freePyrogen-freeTemperature range: -80 °C to 121 °C
Erlenmeyer flasks, PC, sterile, with plain bottom and vent cap
For cultivation of cell lines with high requirements on oxygen, suspension cell cultures and sample storage.Non-treatedGraduatedSterilised by gamma irradiationDNase-, RNase-freePyrogen-freeTemperature range: -80 °C to 121 °C
Erlenmeyer flasks, PC, with cap, HDPE
Large-capacity erlenmeyer flasks can greatly improve cultivation efficiency, they have been widely used in cell biology, microbiology and other fields.Flat bottomTemperature resistance of up to 121 °CBatch number on each packageSterilised by irradiation, SAL 10-6DNase/RNase-free, pyrogen-free and non-cytotoxic
Erlenmeyer flasks, PC, with vent cap, HDPE
Large-capacity erlenmeyer flasks can greatly improve cultivation efficiency, they have been widely used in cell biology, microbiology and other fields. The vent cap with filter membrane (PTFE 0.22 μm) enables continuous gas exchange, ensures sterility and prevents leaks.Flat bottomTemperature resistance of up to 121 °CBatch number on each packageSterilised by irradiation, SAL 10-6DNase/RNase-free, pyrogen-free and non-cytotoxic
Erlenmeyer flasks, PC, with vent cap, HDPE, with handle
Large-capacity erlenmeyer flasks can greatly improve cultivation efficiency, they have been widely used in cell biology, microbiology and other fields. The vent cap with filter membrane (PTFE 0.22 μm) enables continuous gas exchange, ensures sterility and prevents leaks.Flat bottomTemperature resistance up to 121 °CBatch number on each packageSterilised by irradiation, SAL 10-6DNase/RNase-free, pyrogen-free and non-cytotoxic
Erlenmeyer flasks, PETG, sterile, with baffled bottom and standard cap
For cultivation of cell lines with high requirements on oxygen, suspension cell cultures and sample storage.Non-treatedGraduatedSterilised by gamma irradiationDNase-, RNase-freePyrogen-freeTemperature range: -60 °C to 60 °C
Erlenmeyer flasks, PETG, sterile, with baffled bottom and vent cap
For cultivation of cell lines with high requirements on oxygen, suspension cell cultures and sample storage.Non-treatedGraduatedSterilised by gamma irradiationDNase-, RNase-freePyrogen-freeTemperature range: -60 °C to 60 °C
Erlenmeyer flasks, PETG, sterile, with plain bottom and standard cap
For cultivation of cell lines with high requirements on oxygen, suspension cell cultures and sample storage.Non-treatedGraduatedSterilised by gamma irradiationDNase-, RNase-freePyrogen-freeTemperature range: -60 °C to 60 °C
Erlenmeyer flasks, PETG, sterile, with plain bottom and vent cap
For cultivation of cell lines with high requirements on oxygen, suspension cell cultures and sample storage.Non-treatedGraduatedSterilised by gamma irradiationDNase-, RNase-freePyrogen-freeTemperature range: -60 °C to 60 °C
F96 MicroWell™ plates, PS, non-treated surface
Plates with excellent optical quality and flat well bottom.
F96 MicroWell™ plates, PS, non-treated surface, with barcode
Plates with excellent optical quality and flat well bottom.
F96 MicroWell™ plates, PS, Nunclon™ Δ surface
Plates with excellent optical quality and flat well bottom. The Nunclon™ Δ cell culture-treated surface is hydrophilic and promotes cell adhesion and cell growth.
F96 MicroWell™ plates, PS, treated surface
Plates with excellent optical quality and flat well bottom. Manufactured under aseptic conditions in a clean room.
F96 Well Optical Bottom Plates, PS
Nunclon™Δ surface for cell cultureNon-treated plates are optimised for scintillation countingWhite or black upper structure with polymer bottom plates combine the optical clarity of virgin crystalline polystyrene with optimal surface for a wide range of HTS applications Working volume range: 50 - 200µl/well
Filling and Venting Closures Nalgene™ with 3 ports, Type 2162, PP
With TPE gasket and port caps, Nalgene 50 platinum-cured silicone tubing. All plastic screw closures for sterile liquid transfer of tissue media, biological reagents, pure water and chemicals to and from Nalgene-carboys. For applications such as bio-reactors and fermenters. Suitable for all large Nalgene carboys or bottles with screw closures of 53mm (53B) or 83mm (83B). Includes two Nalgene 550 platinum-cured silicone tubing for drop tube and splash guard. Can be used with Nalgene carboy bottles with properly set up peristaltic pumps. Autoclavable.
Freezing Aid for Cell Cultures, FreezerCell™
FreezerCell™ can be used for a variety of cell types, including stem cells, primary cells, cell lines and yeasts. The FreezerCell™ does not require any additives and only needs to be placed in an ultra deep freezer and the cooling runs at -1°C per minute. Fill the freezing aid with the cryotubes and freeze for approx. 3 hours at -80 °C. Then the samples are readyto transfer to a nitrogen tank. This gentle method ensures a high survival rate of the cells during the freezing process.No pre-cooling necessaryConsistent temperature distribution, even with partial loadingLid can be opened easily
Graduated pipettes for tissue culture, clear glass, amber stain graduation
EX (TD) calibrated. Short form. Main point ring graduation. Specially for tissue culture and working on cleanroom benches. With durable amber stain graduation. Zero to the tip, cotton plugged (8mm outer diameter). With mouth piece for cotton plug.
Graduated Pipettes, PS, Sterile
Disposable pipettes, individual sterile packaging, pyrogen-free, clear and graduated. With colour marking and cotton wool filter.
High Density Cell Factory™ Systems
The Nunc™ High Density Cell Factory™ System offers 30% more surface area and yield* than the standard Cell Factory system or similar multi-tray systems for adherent cell culture. Its economic benefits are immediate with impacts across many functions of an organization, as it enables end users to optimize their cell culture manufacturing footprint, reduce material usage and labor-consumption as well as to increase their cell culture yield.
InVitro™ Biotainer™-Bottle Nalgene™, Type 3025, 3005, 3110, 3230, 3415, PETG, sterile
With PE screw cap with silicone seal. Ready to use. With printed graduations in ml. With ribbed hand-grips (except 125 ml and 5000 ml). Materials meet current USP VI, are non-cytotoxic and pyrogen-free.* with PE handle.
LLG-Cell strainers, Nylon, sterile
Cell strainers are especially suited for the generation of homogenous single cell suspensions from tissue or primary cell lysates.Colour coded mesh sizeDesigned to fit into 50 ml tubesIndividually packagedHandle and mantle surface for improved aseptic handlingNylon meshPyrogen-freeFor research and development only.