Cell culture flasks Nunc™ 300cm², treated, PS/HDPE, sterile
The Thermo Scientific™ Nunc™ 300 cm² Cell Culture Flask is our newest and biggest cell culture flask. In fact, this 1,900 mL total volume flask provides the largest culture area of any single-layer flask on the market, and is cell culture treated to deliver a uniform surface chemistry for promoting cell attachment and expanded growth. Promotes cell attachment and growth: Vacuum-gas plasma tissue-culture treated polystyrene for uniform surface chemistry, cell attachment, spreading and promoting cell growth. Durable construction, friendly design: Blow-molded, one-piece design with straight neck and molded grip notches that make this 1,900ml flask easy to hold. Quick volume estimation and sample identification: Includes bold printed graduations (100ml to 500ml, in 50ml graduations) and a large writing patch. Maintains optimal sterility during growth and passage: Filter cap incorporates a 0.2µm pore size hydrophobic membrane that allows gas exchange while maintaining sterility. Screw Cap: Vent/Close. High-quality assurance: Sterilized by gamma irradiation, pyrogen-free. Easy to stack: Prominent stacking feet on upper surface facilitate reliable stacking in incubators and under your culture hood.Material flasks: PolystyreneMaterial caps: HDPE
Cell culture flasks Nunc™ EasYFlask™, PS, with Nunclon™ Supra surface
Cell culture flasks with Nunclon™ Supra surface are designed for the cultivation of fastidious adherent cells. The Nunclon™ Supra surface is more hydrophilic than the Nunclon™ Delta surface and enhances the growth of sensitive cell types under serum-free or low-serum conditions. The ergonomic design with angled neck and wide opening allows easy access to the growth surface by pipettes or cell scrapers.With graduationsNon-cytotoxic, pyrogen-freeSterile (SAL of 10-6)Biocompatible acc. to USP Class VI for raw materialsShelf life 5 years from manufacturing date
Cell culture flasks TripleFlask Nunclon™ Surface, PS/HDPE, sterile
Cell culture flasks with three parallel growth surfaces provide a total culture area of 500 cm² - with external dimensions of a 175 cm² standard flask. Ideal for scale-up. Available with Screw caps (Vent/Close caps) or filter caps for good gas exchange. Certified pyrogen-free and tested for both monolayer formation and cloning efficiency employing primary cells as well as repeating cell lines. SterileMaterial flasks: PolystyreneMaterial caps: HDPE
Cell Culture Flasks TripleFlask™, non-treated, PS/HDPE, pyrogen-free
Non-treated, sterile flasks for suspension cell cultures. White caps for easy identification. Pyrogen-free.Material flasks: PolystyreneMaterial caps: HDPE
Cell Culture Flasks, Falcon®, sterile
Falcon® Cell Culture Flasks feature a unique vacuum-gas plasma tissue culture treatment. These products are certified as sterile, non-cytotoxic, and pyrogen-free. Other surface media available on request.
Cell Culture Flasks, Nunclon™ Sphera™
Optimizing spheroid formationAllows cells to grow in suspension with virtually no cell attachmentSupports many different cell types and their ability to generate spheroidsEnables consistent, repeatable cell growthGrowing 3D cancer culturesMinimizes variability and supports the consistent formation of cancer spheroids that simulate the 3D structures of tumor growth, providing a better model system for studying tumor cell progression and efficacy of anticancer agents in vitroPromoting formation of embryoid bodies (EB)Demonstrates superior quality for embryoid body formation of pluripotent stem cells with minimal spontaneous differentiationResultant cells are able to differentiate into all three germ layersCertifications/ComplianceFree of animal productsPyrogen-free: Endotoxin tested (0.5 EU/mL)Biologically inert: USP biological reactivity class VIHigh level of sterility: SAL 10-6, ethylene oxide gas sterilization
Cell Culture Flasks, Nunclon™Δ Surface, PS/HDPE, sterile
Nunclon™Δ cell culture flasks with surface areas from 25 to 175cm² are available with filter caps or Screw caps (Vent/Close caps) for good gas exchange. Short, wide neck allows easy access to entire growth surface. The Nunclon™Δ treatment is limited to the intended growth area. Neck areas are not treated to prevent cell attachment and growth in undesired areas. Certified pyrogen-free and tested for both monolayer formation and cloning efficiency employing primary cells as well as repeating cell lines. Sterile.Material flasks: PolystyreneMaterial caps: HDPE
Cell culture flasks, treated, PS, sterile
These cell culture flasks with treated surfaces for the cultivation of adherent cells are available with different growth areas from 12.5 to 300 cm². Available with vented or plug-seal caps made from polyethylene. Vented caps contain a 0.22 µm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination. Plug-seal caps can be used in closed systems, providing a liquid and gas sheer seal, but by simply unscrewing the cap one quarter of a turn, this cap can also be used in an open system.Innovative angled neck design offers good pipette and cell scraper accessUpper triangular and wider base shape provides stabilityStackableSpecial writing area near the neckEngraved graduation on both flask sidesSterilized by gamma irradiationPyrogen-freeIndividually packed in resealable outer packaging with zip fastener
Cell culture flasks, treated, PS, sterile, U-shape
These cell culture flasks with treated surfaces for the cultivation of adherent cells are available with vented or plug-seal caps made from polyethylene. Vented caps contain a 0.22 µm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination. Plug-seal caps can be used in closed systems, providing a liquid and gas sheer seal, but by simply unscrewing the cap one quarter of a turn, this cap can also be used in an open system.StackableSpecial writing area near the neckEngraved graduation on both flask sidesSterilized by gamma irradiationPyrogen-free
Cell culture inserts 2in1, for 12-well-plates
The BRAND Insert 2in1 is a cell culture insert used for skin model production, 3D epithelium cultures, chemotaxis analyses, transmigration assays, transport and polarity studies.cellGrade™ plus surfacesTo be used as a hanging or standing insertSterility Assurance Level (SAL) of 10-6Suitable for 2D and 3D cell culturesBIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxicThe BRAND Insert 2in1 is a cell culture insert used for skin model production, 3D epithelium cultures, chemotaxis analyses, transmigration assays, transport and polarity studies.cellGrade™ plus surfacesTo be used as a hanging or standing insertSterility Assurance Level (SAL) of 10-6Suitable for 2D and 3D cell culturesBIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxic
Cell culture inserts 2in1, for 24-well-plates
The BRAND Insert 2in1 is a cell culture insert used for skin model production, 3D epithelium cultures, chemotaxis analyses, transmigration assays, transport and polarity studies.cellGrade™ plus surfacesTo be used as a hanging or standing insertSterility Assurance Level (SAL) of 10-6Suitable for 2D and 3D cell culturesBIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxicThe BRAND Insert 2in1 is a cell culture insert used for skin model production, 3D epithelium cultures, chemotaxis analyses, transmigration assays, transport and polarity studies.cellGrade™ plus surfacesTo be used as a hanging or standing insertSterility Assurance Level (SAL) of 10-6Suitable for 2D and 3D cell culturesBIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxic
Cell culture inserts 2in1, for 6-well-plates
The BRAND Insert 2in1 is a cell culture insert used for skin model production, 3D epithelium cultures, chemotaxis analyses, transmigration assays, transport and polarity studies.cellGrade™ plus surfacesTo be used as a hanging or standing insertSterility Assurance Level (SAL) of 10-6Suitable for 2D and 3D cell culturesBIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxicThe BRAND Insert 2in1 is a cell culture insert used for skin model production, 3D epithelium cultures, chemotaxis analyses, transmigration assays, transport and polarity studies.cellGrade™ plus surfacesTo be used as a hanging or standing insertSterility Assurance Level (SAL) of 10-6Suitable for 2D and 3D cell culturesBIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxic
Cell Culture Inserts and Carrier Plates, PC, sterile
Inserts are treated and tested for good cell attachment. Available in different formats for 6, 12 or 24 well multidishes and in different pore sizes: 0.4, 3 or 8 µm. Easy cultivation of most cell types without matrix coating possible. Used in a variety of applications, including transport studies, toxicity tests, chemotaxis studies and electron microscopy. Packed in sterile Nunclon™Δ treated multidishes and resealable bags.Non-toxic. Pyrogen-free. Sterile.Material membrane: Polycarbonate
Cell Culture Plate Clara 6 Well 50 ml
6 well plate designed for prokaryotic and eukaryotic cell culture. 50 ml well volume is ideal for 30 ml suspension cell culture.Optically clear for easy cell observation during growthANSI/SLAS standard footprint – fully compatible with automation and analysis equipmentDual grip points enable easy robotic handlingConical bottom for maximum liquid recoveryPerfect for scaling up from 96 well plates to larger volumesSimple and easy to use – no more struggling with multiple centrifuge tubesRound well design creates an optimized swirling motion:- Prevents shear stress and cell damage during incubation, perfect for delicate cell lines such as CHO and hybridomas- Creates homogenous cell suspension for predictable and reliable final product, from MABS to plasmids- Facilitates efficient oxygen transfer throughout the culture, for healthy cells and high yield of productAlphanumeric well coding for easy well identificationBarcode for sample tracking and traceabilityCompatible with standard incubators and clampsSupplied sterile, individually packaged and complete with lid for ease-of-useCompatible with heat and adhesive seals
Cell Culture Plates Falcon®, treated, PS, sterile
Cell Culture Plates with lid, condensation rings, and deep-well design for reduced contamination and evaporation. Reliable vacuum-gas plasma tissue culture treatment provides well-to-well and plate-to-plate consistency.TC-treated polystyreneWith special low evaporation lidFlat bottomPyrogen-free
Cell culture plates Nunc™, PS, with Nunclon™ Supra surface
Cell culture plates with Nunclon™ Supra surface are designed for the cultivation of fastidious adherent cells. The Nunclon™ Supra surface is more hydrophilic than the Nunclon™ Delta surface and enhances the growth of sensitive cell types under serum-free or low-serum conditions.Non-cytotoxic, pyrogen-freeSterile (SAL of 10-6)Biocompatible acc. to USP Class VI for raw materialsShelf life 5 years from manufacturing date
Cell Culture Plates, non-treated, PS, sterile
Standard surface non-treated cell culture plates. Reduced evaporation due to raised well rims and uniform rings on the lids.Available with 4-, 6-, 12-, 24-, 48-, 96- or 384-wells (lid included)Flat well bottom96-well plate also available as round bottom plate (4.672 531)Single position lid reduces the risk of cross-contaminationsWells are labeled with alphanumeric code for easy identificationSterilized by gamma irradiationPyrogen-freeMaterial: Polystyrene
Cell Culture Plates, treated, PS, sterile
These standard surface treated cell culture plates for the cultivation of adherent cells exhibit a reduced evaporation due to raised well rims and uniform rings on the lids.Single position lid reduces the risks of cross-contaminationsWells are labeled with alphanumeric code for easy identificationSterilized by gamma irradiationPyrogen-free
Cell culture plates, treated, PS, sterile, with 8-well strips
These standard surface treated cell culture plates for the cultivation of adherent cells exhibit a reduced evaporation due to raised well rims and uniform rings on the lids.Single position lid reduces the risks of cross-contaminationsWells are labeled with alphanumeric code for easy identificationSterilized by gamma irradiationPyrogen-free
Cell culture plates, with 3DSphearo™ Ultra-low Adsorption surface, PS, sterile
The three-dimensional (3D) spheroid model can better simulate the three-dimensional cell networks, cell-matrix, and cell-cell interactions and is ideally suited for drug screening, in vitro tumour research and exploration of stem cell differentiation and sorting.The 3DSphearo™ Ultra-low Adsorption surface has been designed for spheroids (e.g. 3D tumour spheroids) and organoid cultures. The surface has been subjected to a special gel treatment, which gives the cell culture plate extremely strong anti-protein adsorption and anti-cell adhesion. This promotes the suspension growth of cells and enables fast, consistent, and reproducible cell spheroid culture.Surface is non-cytotoxic, biologically inert, and non-degradableDNase/RNase-freePyrogen-freeSterile
Cell culture tubes Nunc™, PS, sterile, with flat side
The surface of the tubes is coated with Thermo Scientific™ Nunclon™ Δ and designed for the cultivation of adherent cell cultures. With cap made of PE.Suitable for microscopy, use of cover glasses possibleLeakproof
Cell culture tubes Nunc™, PS, sterile, with round bottom
The surface of the tubes is coated with Thermo Scientific™ Nunclon™ Δ. With cap made of PE.
Cell Factories EasyFill™ mit Nunclon™Δ Surface, PS, sterile
A time and space saving vessel for large scale cell culture production. Suitable for industrial scale production of vaccines, monoclonal antibodies or pharmaceuticals. Nunclon™Δ surface modification is certified for cell culture and ensures consistent cell growth layer to layer, lot to lot. Ready to use and easy to fill and empty with plug and play connection. Wide range of accessories available for different methods of filling, venting and harvesting (please see Cell Factories Accessories). Sterile.Material cell factories: Polystyrene
Cell Factories with Nunclon™Δ Surface, PS, sterile
Cell culture Cell Factories are optimal for industrial scale production of vaccines, monoclonal antibodies or pharmaceuticals. Nunclon™Δ modification is certified for cell culture, ideal for adherent cells and can be used for suspension cultures. Available in 1, 2, 4, 10 or 40 tray versions for easy scale-up. Additional connectors etc. please see Cell Factories Accessories. Sterile.Material Cell Factories: Polystyrene
Cell lifters, PE, sterile
Flat blade cell lifter for manual harvesting of cells.Special blade design minimizes cell damageSterilized by gamma irradiationIndividually packedDNase/RNase-freePyrogen-free
Cell lifters, with blade or hook, PE, sterile
Cell lifter with flat blade on one end and exchangeable J-hook or narrow blade on the other end. For manual cell harvesting, also for multiwell plates or microcentrifuge tubes.Special blade design minimizes cell damageSterilized by gamma irradiationIndividually packedDNase/RNase-freePyrogen-free
Cell Scrapers Rotatable®, sterile
Free rotating blade to twist easily to the desired direction. Easy changes of the blade angle by slight pressure on the handle. Material blades PE and handle ABS.Small raised knobs on the handle for better gripSterilized by gamma irradiationIndividually wrappedDNase/RNase-freePyrogen-free
Cell Scrapers, sterile
Available in two blade designs, scraper and lifter. Material blades TPE and handle ABS.Particularly thin, swivelling, flexible bladesSterilized by gamma irradiationIndividually wrappedPyrogen-free
Cell Scrapers, sterile
Available in two different lengths with adjustable blade for optimal application flexibility. Pyrogen-free. Sterile.
Cell strainers Flowmi™
Scienceware® Flowmi™ Cell Strainers provide fast and efficient filtering of small volume samples (up to 1000µl) prior to FLOW or FACS analysis. Removes cell aggregates and creates uniform single cell suspensions.Flowmi™ fits most 1000 µl tipsCompact tray holds 50 Flowmi™ Cell StrainersSliding cover for easy, one-handed useSterile, packaged in a re-sealable bag
Cell strainers for tubes
Cell strainers for quickly separation of primary culture cells from cell clusters and tissues.Split design with separate upper and lower cupsSterilized by irradiation to SAL 10-6DNase/RNase-free, pyrogen-free, non-cytotoxic
Cell strainers, for conical centrifuge bottles
For the preparation of samples for flow cytometric analysis and single cell suspension of blood cells, prefiltration of solutions and cleaning of cell suspension.Sterilized by irradiation to SAL 10-6DNase/RNase free, pyrogen-free and non-cytotoxic
Cell strainers, sterile
Cell strainers for rapid isolation of primary cells to obtain a single cell suspensions from tissues. The PP frame is colour-coded and the extended lip allows aseptic handling with forceps. The strong nylon mesh with uniform mesh pores ensures consistent and reliable results. The strainers are non-cytotoxic and fit onto Biologix 50 ml conical tubes.
Cellstrainers EASYstrainers™, PP, sterile
Colour coded mesh sizeDesigned to fit into 50 ml tubesIndividually packaged, convenient blister packHandle and mantle surface for improved aseptic handlingVent opening for fast filtrationPET meshPyrogen-free
Chambered Coverglass Lab-Tek™ und Lab-Tek™ II, PS, sterile
Excellent for confocal image analysis and optimal for high power inverted microscopic viewing. Sterile.Material chamber: PolystyreneMaterial slide: GlassLab-Tek™: connection between the chamber (s) and slides from non-toxic, medical silicone.Lab-Tek™ II: connection between the chamber (s) and slides of biocompatible acrylic adhesive.Medium chamber is not removable.
