Quick sample access for CO2 incubators CB / CBF
Viewing window (13 x 25 cm) in the inner door for quick access to the samples.
Racks for unstirred water baths
Stainless steel. Choice of 8 variants to accommodate different tube diameters and microtubes. J2-SE and J2-LE are for microcentrifuge tubes.
Rapid incinerator
For individual and series incineration of solids and liquids. Upper platform with 8 openings of 34mm diameter, for porcelain crucibles up to 50mm diameter. Upper platform and housing made of stainless steel. With 120 minute timer with audible signal after timed period and separate continuous operation switch. A safety switch switches the mains supply off/on automatically on opening/closing the incinerator chamber. With 1.8 metre cable and earthed plug.Type SVR/EWith electronic temeprature control which allows stepless heating adjustment from 10 to 100 %. Complete for use.Type SVD 95With digital temperature adjustment and display. Complete for use.
Rapid tests Single agar Lovibond® Dipslides
The Lovibond® Dipslides are designed to test liquids as well as surfaces. They are ideal for use in many applications including evaporative cooling towers, closed water circuits, cutting fluids, food testing, and many more.For the determination of the total count.
Refrigerated incubator TFS RI
The cooling incubator utilises a robust compressor cooling system and environmentally friendly, natural refrigerant R290 to ensure the precise low temperature conditions necessary for growth, storage and preservation of samples.7-inch touchscreen for data export, alarm history, operating status and real-time temperature curveUSB data export and RS-485 for direct PC connectionTemperature sensor open/short cut-off alarm, door open alarm, standby or auto-restart after power failureHigh temperature cut-off and low temperature alarmProgramming and storage of up to 10 programmes with 99 segments each on the user interfaceThree level access control to avoid non-authorised operation
Refrigerated incubators IMP
Outstanding temperature uniformity and stability to keep the samples in a safe environmentCFC free/HFC free polyurethane insulation foam for outstanding temperature performance and condensation preventionSophisticated timer function with weekly/daily or real time modeIntuitive programmability function for defined temperature ramping, soak/cool and dwell: store up to 10 programs with 10 temperature steps, loop program, and select mode at end of cycleAdjustable over-temperature shut-off for protocols that require setting of over temperature for protection (class 2 according to norm DIN12880)Fan speed adapts automatically to achieve optimal temperature performanceOutstanding temperature uniformity and stability to keep the samples in a safe environmentCFC free/HFC free polyurethane insulation foam for outstanding temperature performance and condensation preventionSophisticated timer function with weekly/daily or real time modeIntuitive programmability function for defined temperature ramping, soak/cool and dwell: store up to 10 programs with 10 temperature steps, loop program, and select mode at end of cycleAdjustable over-temperature shut-off for protocols that require setting of over temperature for protection (class 2 according to norm DIN12880)Fan speed adapts automatically to achieve optimal temperature performance
Refrigerated incubators IMP, with internal socket EU
Outstanding temperature uniformity and stability to keep the samples in a safe environmentCFC free/HFC free polyurethane insulation foam for outstanding temperature performance and condensation preventionSophisticated timer function with weekly/daily or real time modeIntuitive programmability function for defined temperature ramping, soak/cool and dwell: store up to 10 programs with 10 temperature steps, loop program, and select mode at end of cycleAdjustable over-temperature shut-off for protocols that require setting of over temperature for protection (class 2 according to norm DIN12880)Fan speed adapts automatically to achieve optimal temperature performanceOutstanding temperature uniformity and stability to keep the samples in a safe environmentCFC free/HFC free polyurethane insulation foam for outstanding temperature performance and condensation preventionSophisticated timer function with weekly/daily or real time modeIntuitive programmability function for defined temperature ramping, soak/cool and dwell: store up to 10 programs with 10 temperature steps, loop program, and select mode at end of cycleAdjustable over-temperature shut-off for protocols that require setting of over temperature for protection (class 2 according to norm DIN12880)Fan speed adapts automatically to achieve optimal temperature performance
Reinforced racks for BINDER chambers and incubators, stainless steel
Inclusive fasteners.
Ribbed plates for muffle and ashing furnaces, ceramic
For temperatures up to max. 1200 °C.
Safety drying oven FDL
A safety drying oven from BINDER ensures the perfect test result of your solvent-based paints and coatings, absolute temperature precision even with high ventilation.Defined solvent quantity according to EN 1539Electronically controlled APT.line™ preheating chamber technologyIndependent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarmRS 422 interface for use with APT-COM™ DataControlSystem communication softwareFresh-air monitoring with audible and visual alarm and automatic deactivation of heatingController with time-segment and real-time programmingEasy replaceable fresh air cartridge ensures constant fresh air qualityStandard door gasket made from solvent-resistant FKM for use at up to 200 °C2 chrome-plated racks
Safety temperature switch TEMPAT®-Control
Safety temperature switch for monitoring temperature-based routines of all kinds. Ideal for monitoring simple temperature controllers. The TEMPAT® Control device switches off when the limit temperature is obtained; a beep is heard. When the temperature drops below limit, the limit contact does not switch on automatically; it must be reset by the user.SpecificationsVoltage:220-235V ~ 50/60HzSwitching capacity:max. 1800VASwitching current:max. 8AMeasuring accuracy:±1%Dimensions:150 x 80 x 55mmWeight:0.65kg
Sample hydrolysis and digestion vessels
For the digestion of small sample volumes up to 0.5g in microwave ovens. Made of isostatically pressed, high-grade PTFE (TFM). The chemical resistance and usual PTFE properties remain unchanged. TFM is a modified PTFE by Hoechst and contains thermoplastic elements. This gives rise to a homogeneous, non-porous surface. Contaminating residues from earlier digestions are therefore avoided. Resists pressure deformation (to max. 25 bar) and temperature (max. 160 °C). An accessory burst-proof, sealing membrane prevents loss of volatile compounds and provides safety against overpressure. Optional digestion vessels with interchangeable inserts (internal liners) enable precise weighing-in (in most cases the complete vessels would be too heavy for balances). In addition, different digestion processes can be carried out in only one basic vessel by using several inserts.
Sand bath SD with performance control and connection cable
For continuous operation. Electrical sand bath with stepless power control. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over the entire heating surface. The sand bath frame is tightly screwed onto the hotplate so that the sand is in direct contact with the hotplate. Useful depth 50 mm. Stainless steel controller housing, with painted central section. Height-adjustable feet. Connection cable approximately 1.7 m with earthed plug.
Sand bath SD with performance control and permanent connection
For continuous operation. Electrical sand bath with stepless power control. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over the entire heating surface. The sand bath frame is tightly screwed onto the hotplate so that the sand is in direct contact with the hotplate. Useful depth 50 mm. Stainless steel controller housing, with painted central section. Height-adjustable feet.
Sand bath ST with performance control, thermostatic controller and connection cable
For continuous operation. Electrical sand bath with thermostatic temperature control and separate power controller. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over the entire heating surface. The sand bath frame is tightly screwed onto the hotplate so that the sand is in direct contact with the hotplate. Useful depth 50 mm. Stainless steel controller housing, with painted central section. Height-adjustable feet. Connection cable approximately 1.7 m. With earthed plug.
Sand bath ST with performance control, thermostatic controller and permanent connection
For continuous operation. Electrical sand bath with thermostatic temperature control and separate power controller. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over the entire heating surface. The sand bath frame is tightly screwed onto the hotplate so that the sand is in direct contact with the hotplate. Useful depth 50 mm. Stainless steel controller housing, with painted central section. Height-adjustable feet.
Sealing and Rupture Membranes, PFA, PTFE
1 set consisting of 10 sealing membranes made of PFA and 10 rupture membranes made of PTFE, for digestion vessels.