Ovens Heratherm™ General Protocol, with mechanical convection
Thermo Scientific™ Heratherm™ General Protocol ovens are perfect for routine daily work, providing the ideal heating and drying solution for your applications.Low energy consumptionBuilt-in timerExcellent footprint/volume ratioInner chambers made from corrosion-resistant stainless steel with rounded corners for easy cleaningLarge, easy to view vacuum fluorescent displaySimple, microprocessor-based touch button controlsDoors can be opened over 180° making these units easy to accessAutomatic overtemperature alarm system to protect samplesThe exhaust vent can be used as an access port for an external temperature sensorOvens come standard with a RS232 data interfaceModels with mechanical convection provide a temperature uniformity of ±3.3 °C with temperature stability of ±0.3 °C at 150 °C.
Ovens TR 60 - TR 1050 up to 300 °C
With their maximum working temperature of 300 °C and forced air circulation, the TR series ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilising or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust.Models TR 60 to TR 240 designed as tabletop modelsModels TR 420 and TR 1050 designed as floor standing modelsHorizontal, forced air circulation results in temperature uniformity better than ±5 °CStainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to cleanLarge handle to open and close the doorCharging in multiple layers possible using removeable trays (number of removeable trays included, see table below)Large, wide-opening swing door, hinged on the right with quick release for models TR 60 to TR 420Double swing door with quick release for TR 1050TR 1050 equipped with transport castorsPID microprocessor control with self-diagnostic systemInfinitely adjustable exhaust at the rear wall with operation from the frontAvailable controller variants are the R 7 as basic variant with adjustable holding temperature or the programmable controllers B 510 (with touch panel, 5 programs with 4 segments each) and C 550 (with touch panel, 10 programs with 20 segments each)Solid state relays provide for low noise operation220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadInfinitely adjustable fan speed of the air-circulationWindow for observing chargeFurther removeable grids with railsSide inletStainless steel collecting pan to protect the furnace chamberDoor hinges on the left sideReinforced bottom plateSafety technology according to EN 1539 for charges containing liquid solvents (TR .. LS) up to model TR 240 LS, achievable temperature uniformity ±8 °CTransport castors for model TR 450Upgrading available to meet the quality requirements of AMS 2750 E or FDAProcess control and documentation via VCD software package for monitoring, documentation and control
Peltier-cooled incubator IPPeco
Thanks to the sophisticated Advanced Peltier Technology from Memmert, the IPPeco is the most energy-efficient and simultaneously the most powerful cooled incubator of its kind.Compared to similar appliances, its heat-up, cool down and recovery times are much shorter.The Peltier-cooled incubator saves on operating costs, ensures sample quality and makes work in a microbiological laboratory significantly more efficient.9 model sizes (32 to 2140 litres volume)2 model variants: SingleDISPLAY and TwinDISPLAYDouble doors as standard with fully insulated stainless steel, inside glass: prevention of contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors (size 1400/2200 stainless steel doors with glass sector; sizes 750, 1060 and 1400 two leaves, size 2200 three leaves)Fans integrated in the Peltier elements ensure rapid energy transfer and optimum temperature distributionSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
Peltier-cooled incubator IPPecoplus
Thanks to the sophisticated Advanced Peltier Technology from Memmert, the IPPeco is the most energy-efficient and simultaneously the most powerful cooled incubator of its kind.Compared to similar appliances, its heat-up, cool down and recovery times are much shorter.The Peltier-cooled incubator saves on operating costs, ensures sample quality and makes work in a microbiological laboratory significantly more efficient.9 model sizes (32 to 2140 litres volume)2 model variants: SingleDISPLAY and TwinDISPLAYDouble doors as standard with fully insulated stainless steel, inside glass: prevention of contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors (size 1400/2200 stainless steel doors with glass sector; sizes 750, 1060 and 1400 two leaves, size 2200 three leaves)Fans integrated in the Peltier elements ensure rapid energy transfer and optimum temperature distributionTwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Peltier-cooled incubators IPP
Heating and cooling seamlessly with one system thanks to Peltier technology. In this respect, cooled incubators IPP not only contribute to climate protection, but it also achieves an additional decrease in operating costs of up to 90% compared to compressor technology.Extremely quiet, vibration-free and space saving as no compressor is requiredNo condensation in the interior chamber: due to the closed Peltier cooling system no outside air is exchangedLED light module for sizes 110 to 750 (as an option): dimmable LED light in three alternative colour temperatures (cold white light, warm white light or cold white and warm white light, dimmable in steps of 1 %)SingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
Peltier-cooled incubators IPPplus
Heating and cooling seamlessly with one system thanks to Peltier technology. In this respect, cooled incubators IPP not only contribute to climate protection, but it also achieves an additional decrease in operating costs of up to 90% compared to compressor technology.Extremely quiet, vibration-free and space saving as no compressor is requiredNo condensation in the interior chamber: due to the closed Peltier cooling system no outside air is exchangedLED light module for sizes 110 to 750 (as an option): dimmable LED light in three alternative colour temperatures (cold white light, warm white light or cold white and warm white light, dimmable in steps of 1 %)TwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Perforated shelves for Incubators Heratherm™
Stainless steel. Including 2 shelf suports.
Petri dishes, PS, sterile
Made of transparent polystyrene, gamma-irradiated.Heat resistantStackableWith or without vents
Power controller KM-L116 for heating mantles
LabHEAT®-regulator for heating mantles. Electromechanical; infinitely variable control over power outlet; plastic housing (H x W x D) 55 x 65 x 120 mm; switching power max. 2990 W (13 A); 1.5 m power supply (earthed) cable with plug.
Power controller, MES 2000 PSI
An alternating current safety controller for variable and no-loss control of hotplates, heating tapes, soldering irons, light bulbs, infrared radiators etc.Potentiometer scale adjustment and electronic triac switch monitoring. Controller switches irreversibly to dipole in the event of triac switch malfunction and visual and audible alarms operate immediately. This ensures optimum safety.Voltage220-235V 50 / 60 HzSwitching capacityMax. 2300 VASwitching currentMax. 10 AElectronicsPhase controlsRegulating range10 to 235 V a.c.Anti-interferenceGrade NDimensions:188 x 110 x 70 mmWeight1.2 kg
Power controller, Voltron 20
Alternating current resistance controller with interference suppressor for variable, no-power-loss control of hotplates, heating tapes, soldering irons, light bulbs, infrared radiators etc., control range 25V to 225V. With single throw on/off potentiometer and shielded fuse holder for safe fuse replacement away from the internal circuit. Fitted with interference suppressor in accordance with EN standard.
Power controller, VOLTRON-PLUS F
Alternating current controller for variable and no-loss control of resistive and inductive power devices with the following additional features:On/off luminous rocker switch, dipole switching, 10 A (4)IC controlled, hysteresis freeQuiet runningAnti-interference grade NFast-blow fuseProtected fuse holderPower-on indicator lampSpecifications Voltage: 220-235V, 50/60HzSwitching capacity:Max. 2000VASwitching current:Max. 10AElectronics:Phase controlsRegulating range:0 to 235V a.c.Dimensions:150 x 80 x 55mmWeight:0.7kg
Precision hotplate PZ 44
Automatic, precise regulation of temperatures between 20 and 450 °C. Digital presetting and temperature display. Three power levels (825 W, 1650 W and 3300 W) can be set and an additional electronic power controller (adjustable 10 % to 100 %) is provided. At 825 W and 3300 W settings the entire plate surface is heated. At 1650 W setting only the right hand side of the plate is heated. As a result of heat conduction, the temperature from the right hand side to the left edge of the plate varies by approx. 40 %. Built-in relay allows direct connection of electronic contact thermometers. With solid, flat, low-distortion, cast GG15 alloy. Switching differential ±1 K.
Precision hotplates PZ
For continuous operation. Provide extremely accurate, uniform temperatures, even in plate corners and on edges. Polished anodised aluminium heating surface. Microprocessor-controlled temperature controller with temperature setting up to 99.9 in 0.1 °C steps, over 99.9 in 1 °C steps. Actual temperature displayed continuously. With separate power controller for performance adjustment to the heating requirements from 10 to 100 %. Built-in relay allows direct connection of electronic contact thermometers.
Probe for temperature controllers, TEMPAT®
All probes with 2m connecting cable and plug.* probe tube stainless steel 4301.** mantle of austenitic stainless steel.
Pump cabinet set VD with vacuum pump VP1
Set consisting of VP1 vacuum pump, pump cabinet (under cabinet) for housing the pump and a connection kit for connecting the pump to the VD series vacuum drying oven. The under cabinet raises the vacuum drying chamber to an ergonomic working height, reduces pump noise and protects the pump from mechanical damage. The pump cabinet contains a switchable socket that can be controlled via the controller of the vacuum drying oven.
Pump cabinet set VD with vacuum pump VP2
Set consisting of VP2 vacuum pump, pump cabinet (under cabinet) for housing the pump and a connection kit for connecting the pump to the VD series vacuum drying oven. The under cabinet raises the vacuum drying chamber to an ergonomic working height, reduces pump noise and protects the pump from mechanical damage. The pump cabinet contains a switchable socket that can be controlled via the controller of the vacuum drying oven.
Pump cabinet set VDL with vacuum pump VP5 EX
Set consisting of VP5 EX vacuum pump, pump cabinet (under cabinet) for housing the pump and a connection kit for connecting the pump to the VDL series vacuum drying oven. The under cabinet raises the vacuum drying chamber to an ergonomic working height, reduces pump noise and protects the pump from mechanical damage. The pump cabinet contains a stainless steel drip tray. There is an exhaust port (Ø 100 mm) on the rear wall of the pump cabinet for connection to an on-site exhaust system.