Adapters for microtube rack, PP
Microcentrifuge tube racks can be equipped with adapters (PP) for 0.5 ml reaction tubes. With light finger pressure on the insert, it snaps in permanently.
Boxes for centrifuge tubes, cardboard
Boxes with press-on lid. Manufactured from freeze resistant, water repellent, durable cardboard covered with superior quality chromated paper coating. Easily stackable for reducing storage space. Chemically resistant to alcohols and mild organic solvents. Offers temperature resistance between -196 to 121 °C. Alphanumerical index on the lid enables easy identification of tube positions. Write on area on the side wall provides a convenient area for special notes.
Centrifuge bottle racks, PP
Surface with markingsStackableDNase/RNase-free, non-pyrogenic
Centrifuge tube racks, PP
Surface with markingsStackableDNase/RNase-free, non-pyrogenic
Cube Racks, PP, set
One frame each in blue, green, yellow, orange and pink. Accommodate 4 x 50 ml tubes, 10 x 15 ml tubes, 12 x 3-7 ml or 16 x 1.5 ml microcentrifuge tubes. Polypropylene racks slide together, allowing you to work with different tubes on as many connected racks as desired. Interlock on all sidesAutoclavable
Eppendorf Tube Racks, PP
Numbered positions for easy handling and identificationMade of high quality polypropylene (PP) for chemical and physical resistanceTemperature stability from -86 °C to 121 °CAutoclavable (121 °C, 20 min)Laboratory washer-safe for easy cleaningStackable to save lab space
Eppendorf Tube Racks, PP, for 5 ... 50 ml tubes
Numbered positions for easy handling and identificationMade of high quality polypropylene (PP) for chemical and physical resistanceTemperature stability from -86 °C to 121 °CAutoclavable (121 °C, 20 min)Laboratory washer-safe for easy cleaningStackable to save lab spaceFor 6 x 5/15 ml and 6 x 50 ml tubes
Frame for test tube racks Switch-Grid™, POM
This split-frame holds up to two different grid inserts.Three tier rackWith rubber feetsStackableChemical resistantAutoclavable at 121°C
General Purpose Test Tube Racks Nalgene™, PC
Organize and store test tubes using general purpose test tube racks. These racks are available with handles for easy carrying. When empty, they can be stacked with any other racks of the same length. Holes are keyed with molded-in numbers and letters for easy identification of tubes. Higher specific gravity than water so it stays submerged in a water bath and won't float. Autoclavable (will reduce strength over time).
Half Racks Nalgene™ Unwire™
Organize and store samples with space-efficient half racks, which have all the features of full-sized Unwire racks but occupy half the space. Ideal for use in incubators, refrigerators, freezers, under lab hoods and on benchtops, these racks fit easily in ice or water baths and will not float. They are molded in four bright colors to help keep samples organized.
LLG-Microtube rack, PP, 80-well, set
Made of Heavy-duty Polypropylene. Designed to hold 1.5 to 2.0 ml microtubes (5 x 16 arrays) in a temperature range from -80 °C to 121 °C. Molded numbers on the surface for easy samples identification. Suitable for autoclaving at 121 °C.Set content: Microtube rack in blue, green, pink, yellow, orangeFor research and development only.
LLG-Microtube racks, PP, 80-well
Made of Heavy-duty Polypropylene. Designed to hold 1.5 to 2.0 ml microtubes (5 x 16 arrays) in a temperature range from -80 °C to 121 °C. Molded numbers on the surface for easy samples identification. Suitable for autoclaving at 121 °C.For research and development only.
LLG-Test tube rack, PP
Made of PP. Stackable. Supplied in three parts and are easy to assemble. Alphanumeric grid referenced on top tier for easy identification of samples. Can be used in water baths. With large lateral marking area. Autoclavable.
LLG-Test tube rack, wire with epoxy powder coating
White. Ideal for storing and transporting test tubes and centrifuge tubes. The second grid provides an optimal hold.
Microtube Rack Rota-Rack® Duo
For processing PCR® tubes right next to centrifuge tubes. The tube size 0.2 ml is arranged in the standard 96-well format, enabling the use of PCR® transfer trays. By rotating the rack, different centrifuge tubes can be processed side by side. Quickly identify tubes with imprinted alphanumeric system.Blue section: holds 96 x 0.2 ml tubes or 48 x 1.5/2.0 ml tubes on the reverse sidePurple section: holds 48 x 0.5 ml tubes or 48 x 1.5/2.0 ml tubes on the reverse sideAutoclavable
Microtube Rack, 20-Well, PP
Interlocking racks with 2 x 10 array hold 1.0/1.5/2.0 ml tubes.Polypropylene racks lock together on each side, permitting the user to attach several together to increase capacity.Features an innovative "hold-it" finger slot on the front, and internal ribbing for stability. Autoclavable.
Microtube racks, PP
Grey. Numbered positions for 20 x 1.5 ml microcentrifuge tubes. Autoclavable (121 °C).
Microtube racks, PP, 4-Way
Racks feature a unique system of tabs and slots, which facilitate easy assembly and sturdy fit to build as large as rack as you need. Heavy-duty polypropylene racks can hold 4 x 50 ml or 12 x 15 ml conical tubes, 32 x 1.5 ml or 32 x 0.5 ml microtubes. Autoclavable.
Microtube racks, PP, 80-Well
Autoclavable. Popular fraction collector plate-style rack. Easily load and transfer 80 tubes with 1.5 ml or 2.0 ml in a compact format (5 x 16 array). Polypropylene rack has moulded-in coordinates to aid organisation. Assorted colours.Dimensions (L x W x H): 225 x 67 x 28mm
Microtube racks, PP, 96-Well
Autoclavable. Polypropylene rack has 96 wells for 0.5 ml microcentrifuge tubes on one side, and 96 wells for 1.5 ml to 2.0 ml microcentrifuge tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack.
Microtube racks, PP, 96-Well, set
Set of 5 colours: Blue, green, pink, yellow and orange. Autoclavable. Polypropylene rack has 96 wells for 0.5 ml microcentrifuge tubes on one side and 96 wells for 1.5 ml to 2.0 ml microcentrifuge tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack. Dimensions (L x W x H): 246 x 121 x 50 mm
Microtube Storage Boxes, PP, 50-/100-Well
Autoclavable. Compact storage box has angled front slot for easy access to tubes. Rugged, polypropylene box has durable three-point hinges, snapping clasp for secure closure, moulded grid lines on lid, imprinted coordinates on bottom of base and imprinted and raised coordinates on tube wells. Ideal for sample or case study storage.Holds 1.5 ml to 2.0 ml microtubes. Resist storage temperatures from -80 to 121 °C.
Microtube storage boxes, PP, 50-/100-Well, set
Autoclavable. Compact storage box has angled front slot for easy access to tubes. Rugged, polypropylene box has durable three-point hinges, snapping clasp for secure closure, moulded grid lines on lid, imprinted coordinates on bottom of base and imprinted and raised coordinates on tube wells. Ideal for sample or case study storage. Holds 1.5 ml to 2.0 ml microtubes. Resist storage temperatures from -80 to 121 °C.The set contains the colours blue, green, violet, yellow and orange.
Mircotube Rack (1.5ml), PP
Two-tier, available in four different colours. These versatile racks are autoclavable and can be used dry, in water baths or in freezers. Each rack has an alpha-numeric reference for easy sample identification. Can accomodate 100x1.5ml tubes with closed caps or without caps, and 50x1.5ml tubes with open caps. Racks are stackable even when loaded and have (purpose) designed label spaces on each side (for bar coding, etc.).
One-Well Connecting Tube Racks, PP
The racks can be plugged together or used as a stand-alone rackFor conical or round-bottom tubesAssorted colors (Blue, Green, Yellow, Orange, Pink)
One-Well wire tube racks, epoxy-coated steel
Yellow. For conical and round bottom tubes.Temperature resistant down to -40°CAutoclavable
PCR Multirack, PP
Fully autoclavable. This storage/working rack, with lid, is designed to work with different PCR volumes at the same time. It can accommodate up to 32 individual 0.2 ml PCR tubes, 24 pieces of 1.5/2.0 ml and 16 pieces of 0.5 ml microtubes. Tube wells are alpha-numerically matrixed with raised bold type for accurate sample identification. The rack also has a transparent lid for easy viewing of samples. Frosted writing panels on four sides allow labelling or writing.
Rack for centrifuge tubes, ABS
Can be used for tubes with a diameter up to 16 mm. Rack comes as "ready" unit, no assembly is required. Bottom of each tube compartment has a silicone gripping finger that holds the tube at centralised position. Not recommended for autoclaving. With Push & Eject funktion. Holds up to 50 tubes in 5 x 10 layout.
Rack for centrifuge tubes, PP
Suitable to hold 15 ml and 50 ml centrifuge tubes with conical bottom. Just push the tubes into the cavities and leave them. Unique design has an angular end to provide easy stacking for space saving purpose. Moulded in alpha numeric grid reference on the rack allows easy sample identification.
Reaction tubes stand, PE-coated wire
PE-coated wire. For 4 x 12 reaction vessels 1.5ml, distance between compartments is 5mm. With two handles.
Storage cases for culture tubes
For the protective storage and transportation of culture tubes.
Test tube and draining racks Nalgene™, PP
The test tube and draining racks consist of an array of pegs to place reaction tubes and test tubes. The tubes can also be inverted for drying. Ribs ensure that the inverted tubes do not stand up on the floor, allowing liquids to drain through the holes.Suitable for drying electrophoresis glass platesAutoclavable
Test tube holders, wood
Hardened wood test tube holders with steel spring. Total length 180mm and hold tubes up to 25mm.
Test tube rack, plastic coating
Test tube rack with white plastic coating, temporarily resistant up to 150 °C with 2 compartments, base made of welded mesh w 8 mmNumber of compartments: 3 x 12Rack height: 70 mmCompartment size: 18 x 18 mm (up to Ø 16 mm)