Test tube rack, PP
PP. For all common test tube diameters. Very sturdy design. All openings are widely spaced apart to accommodate screw cap tubes. All racks have the same footprint and can be stacked easily when empty. Modified PP with greater density than water makes them ideal for use in water baths. Large marking area (60 x 12mm) for barcode labels and alphanumeric references for clear sample identification. Racks are supplied in three parts for quick and permanent assembly. Continuous use temperature -20 to 90 °C. Autoclavable at 121 °C (2 bar), according to DIN EN 285. Choice of colours as outlined below.
Test tube rack, PP
PP. For all common test tube diameters. Very sturdy design. All openings are widely spaced apart to accommodate screw cap tubes. All racks have the same footprint and can be stacked easily when empty. Modified PP with greater density than water makes them ideal for use in water baths. Large marking area (60 x 12mm) for barcode labels and alphanumeric references for clear sample identification. Racks are supplied in three parts for quick and permanent assembly. Continuous use temperature -20 to 90 °C. Autoclavable at 121 °C (2 bar), according to DIN EN 285. Choice of colours as outlined below.
Test tube rack, PP, "monoblock"
Blue. Manufactured from high density polypropylene. Moulded-in alpha numeric grid reference on the top tier of the rack allows easy sample identification. Due to their weights, they do not float in the water baths. Autoclavable.
Test tube rack, PTFE
Good chemical resistanceOperating temperature -200 to 250 °C
Test tube racks
For 15 ml test tubes. 3-tier design.White nylon coated or polished stainless steel wire.Second tier approximately 40mm high.
Test Tube Racks Mega Rack®, ABS
Stores a high quantity of samples eliminating the need for multiple racksAlphanumeric grid for quick location and retrieval of tubesSturdy, lightweight material for easy transport
Test Tube Racks Mega Rack®, PP
Stores a high quantity of samples eliminating the need for multiple racksAlphanumeric grid for quick location and retrieval of tubesSturdy, lightweight material for easy transport
Test Tube Racks Nalgene™ Unwire™, PP
Hold a full load of test tubes or centrifuge tubes with Polypropylene Test Tube Racks, molded in one piece using ResMer™ manufacturing technology.Higher specific gravity than water so rack stays submerged in a water bathHolds a full load of test tubes or centrifuge tubes for 13, 16, 20, 25 and 30 mm sizes or up to 72 smaller diameter tubesAvailable in four bright colors to help keep samples organizedAccepts large labels for easy sample identification
Test tube racks Nalgene™, acetal plastic
Thermo Scientific™ Nalgene™ Unwire™ test tube racks manufactured with Resmer™ Manufacturing Technology. 3-tier grid design. Will not float. Single moulding, with no sharp edges or corners. Alphanumeric grid referenced on top tier for easy identification of samples. End plates can be labelled or written on. Autoclavable.
Test tube racks Nalgene™, PP
White. Widely spaced apertures to accommodate screw cap tubes.
Test tube racks OneRack®, PP
Tough and more highly resistant to acids, bases, solvents and heat. These durable racks are molded in a single, continuous piece so no assembly required and there are no detachable pieces.Molded in alpha-numeric gridNo floating in water bathsFlat labeling areaGood chemical resistanceFurther colours available on request.
Test tube racks Poxygrid, wire
For storage and transport of test tubes.Rigid wire construction with epoxy finishAutoclavable at 121 °C
Test tube racks Switch-Grid™, POM
This split-frame rack holds up to two different tube sizes at the same time. The grids can be switched quickly. The test tube rack can be easily cleaned with common lab detergents, ethanol, or isopropyl alcohol.For test tubes 10 mm to 30 mm diameterWith 5 colour-coded grid insertsThree-tier designNon-slip rubber feetChemical resistantFrame and grids are autoclavable at 121°C
Test tube racks, 18/10 stainless steel wire
Test tube racks made of stainless steel wire, electrolytically polished.
Test tube racks, 18/10 stainless steel, demountable
Test tube rack can be dismantled into individual parts.
Test tube racks, OneRack®, POM
Tough and more highly resistant to acids, bases, solvents and heat. These durable racks are molded in a single, continuous piece so no assembly required and there are no detachable pieces.Molded in alpha-numeric gridNo floating in water bathsFlat labeling areaFiberglass-reinforced polyoxymethylene (POM)Good chemical resistanceAutoclavable
Test tube racks, OneRack®, POM, half size
Tough and more highly resistant to acids, bases, solvents and heat. These durable racks are molded in a single, continuous piece so no assembly required and there are no detachable pieces.Molded in alpha-numeric gridNo floating in water bathsFlat labeling areaFiberglass-reinforced polyoxymethylene (POM)Good chemical resistanceAutoclavable
Test tube racks, PP
The test tube racks sink in a water bath and have numbered and lettered rows for tube identification. Dimensions (W x D x H): 246 x 104 x 64 mm.Colour-codedEnd plates for labelingStackableAutoclavable
Test tube racks, PP
The test tube racks can be easily assembled and disassembled for space-saving storage. StackableShatterproofAlphanumeric markingAutoclavable
Test tube racks, PP
3 tier with grips for easy transportStackableBase tier has rounded wells with drain holesTop tier has lettered and numbered rowsSteam autocavable at 121 °C
Test tube racks, PP
For tubes up to 18mm in diameter. Autoclavable and unbreakable. Can be dismantled. Can be recycled.
Test Tube Racks, PP, clinical, 4-Way
Especially suited for round, flat and conical blood collection and culture tubes. 6 racks can be assembled to build a large rack. Sturdy polypropylene racks can hold tubes of Ø 13 x 75 mm, Ø 13 x 100 mm, Ø 16 x 100 mm, Ø 16 x 125 mm, Ø 17 x 120 mm or volumes of 3.5 ml, 7 ml, 10 ml, 15 ml. Different sizes to hold 12 or 18 tubes dependent on tube size.Racks can be used in water baths and placed in freezersAlphanumeric identificationChemically resistantAutoclavable
Test tube racks, stainless steel
Corrosion resistant, stainless steel wire. Electrochemically polished. Opening size 18 x 18mm. Mesh grid levels are positioned at the top and 30mm above the base.
Test tube racks, wire/nylon
Wire with white nylon coating. 3-tier design , second tier approximately 30 mm high. Opening size 18 x 18 mm. Temperature resistant up to 80 °C max.
Test tube racks, wire/nylon
White nylon coated or stainless steel wire, electrochemically polished. 3-tier design, second tier approximately 30mm high. For 50ml test tubes.
Tube clamp, plated
Ideal for handling hot tubes or to heat test tubes up to 30 mm diameter. Manufactured from stainless steel with a finger grip. With a long arm for better handling and to avoid close contact between fingers and the flame. High resistance to heat up to 100°C.
Tube Rack Adapt-a-Rack™, POM
Capable of holding different size tubes in each available slot as the well literally adapts to your tube size to hold firming in an upright position. The design enables you to hold 12 to 30mm (5 to 50ml) tubes simultaneously and still allow full viewing of the tube label. Racks can be linked together for additional holding capacity. Autoclavable. Dimensions (W x D x H): 181 x 56 x 76mm
Tube Rack for 5ml centrifuge tubes, PP
Designed specifically for 40 x 5 ml centrifuge tubes this rack will also accommodate other tubes with a diameter of 13 to 16 mm. Made of durable and corrosion resistant white polypropylene. End plates have handles for easy transport and stackingSteam autoclavable at 121 °CDimensions (L x W x H): 260 x 113 x 105 mmRows: 4 x 10
Tube Rack OneRack® Multi
Tube rack with interchangeable inserts for a wide range of tube types with diameters from 10 to 30 mm. The inserts can be pivoted to either an upper or lower position to accommodate tubes of various heights. Autoclavable.Suitable for tubes from 5 to 50 mlAngled position of the inserts for comfortable pipettingThe open design allows a very good view of the graduation and the filling level of the vesselsUnique shape of the wells (teardrop design) ensures that the vessels stand particularly firmlyAlphanumeric position markingErgonomic handlesScope of supply: 1 x base, 6 x inserts (2 x Ø 10 to 13 mm, 2 x Ø 13 to 17 mm, 2 x Ø 25 to 30 mm)
Tube Rack Origami, PP
The Origami Tube Rack is designed to be height adjustable which makes it very flexible and usable for almost any test tube on the market. Depending on the hole diameter the racks can be used for microcentrifuge tubes, cryovials, vacutainers, and 15ml and 50ml falcon tubes. The Origami Tube Rack has a printed alphanumeric grid for easy location of the samples. It is made of polypropylene and can be used in temperatures from -45 °C to 60 °C. Best choice for mobile Labs. After usage demount it and store it in a drawer.