Flask tongs, chromated steel
PVC coated insulated jaws, used to hold all types of flasks.
Flask tongs, stainless steel
Flask tongs made from stainless steel, plastic coated.
Gas cartridge
220g / 400ml. With safety valve. Provides approx. 3 hours use. EN 417: 2012. 70 % butane, 30 % propane.
Gas cartridges
C 206 GLS pierceable cartridgePiercing cartridge with integrated gas lock system according to EN 417: 2012. For bunsen burner without safety valve. For bunsen burners Labogaz® 206 and Soudogaz blow torches.CV470 Plus and CV 300 Plus valve cartridgeWith safety valve. For bunsen burner Labogaz® 470.CV 360 valve cartridgeWith safety valve. For gas-safety burner schuett phoenix (Cat.-No. 9.018 761).Safety valve allows removal of partially used valve gas cartidges.
Gas cartridges Powergas 2203
35 % propane, 65 % butaneEN 417: 2012, UN 2037With self-closing valve
Glass ceramic laboratory protection plate
Thickness 3,8 mm, chamfered edges. Usable above open burner flame. Ideal as heating surface in place of a wire gauze or pipeclay triangle.
Glass ceramic laboratory protection plate
Smooth, pore-free surface. Chemically resistant and operates between -200°C and 700°C. Ideal for use as a bench protector or heating surface in place of a wire gauze or pipeclay triangle.
Hot air blower Steinel® HG2120E/HG2320E
Electronically controlled hot air blower.
Infrared burner PowerCube IRB2
Laboratory heating device for the safe, rapid heating of large samples. Can be used anywhere, even where standard burners with an exposed flame cannot be used.Heats up quickly, constant heatingNo open flames, no soot, odourlessIntegral continuous electronic power adjustment between 0% and 100%Casing safe to touch even when hotBuilt-in casing handles for safe transportInert ceramic, long-life heating elementBuilt-in overheat monitorProtection of electrical components against spilled liquidsAdditional side safety shield on burner elementIncludes four-arm support for flat bottom containers. By using an accessory bracket the burner can be mounted on a tripod
Infrared burner, PowerCube IRB1
The PowerCube is suitable for all rapid, non-contact heating activities in laboratories, industry and education. Reagent bottles, flasks or dishes, depending on their size, can be placed directly on the support trivet over the heating element or attached to a stand mounting.Advantages:Particularly safe as no open flame is usedStable thanks to practical cube shape. The casing itself only gets slightly hot in useAccelerated heating-up rate in comparison with other electrical heating devicesHeating element sealed in ceramic, therefore insensitive to external influences (spillages)Low operational cost due to the long life heating element and low power consumption of only 200 W, in spite of high temperatures of 700°C
Multi gas burner Teclu, Ms-Ni
With stopcock. Air regulation, max. 1300°C. An anti-slip rubber coating under the base ensures absolute stability.
Outlet Valve
For metallic gas cartridges according to DIN EN 417:2012. Outside thread M 10 x 1.
Safety burner, Ms-Ni
Maximum temperature 1300°C, with needle valve, thermo safety element (bimetallic flame sensor with magnetic lock), air regulator and pilot light. Nickel-plated brass and steel. An anti-slip rubber coating under the base ensures absolute stability.
Safety pilot burner with cartridge
With needle gas valve and air regulator.Only for the gas cartridge 9.018 364.
Spirit burner, 18/10 steel
With wick height adjuster and sealing cap. Capacity approx. 60ml.
Square Quadrupod with glass ceramic plate
Plate attachment can be used as a protective table mat. Quadrupod made of stainless steel, feet removable.
Square Quadrupod, nickel chromium steel
For glass ceramic laboratory plates. Dimensions as outlined below.
Teclu burner for cartridge
With needle gas valve and air regulator.Only for the gas cartridge 9.018 364.
Teclu burner, Ms-Ni
Nickel-plated brass and steel. DIN 30665. max. 1300°C, with needle valve, air regulator and pilot light. An anti-slip rubber coating under the base ensures absolute stability.
Teclu burners with needle valve
Acc. to DIN 30665, with air regulation, without low flame.
Teclu burners with needle valve
Acc. to DIN 30665, with air regulation, with low flame.Please order safety base (shown in image) separately.
Teclu burners with needle valve
DIN 30665. Ignition protection, thermocouple, air regulation, low flame.
Teclu burners with needle valve
DIN type. With thread connection, ignition protection, thermocouple, G1/4 left-hand thread, air regulation, pilot flame and needle valve. Burnerhead Ø 17 mm
