Infrared burner, PowerCube IRB1
€0.00
Product information "Infrared burner, PowerCube IRB1"
Advantages:
- Particularly safe as no open flame is used
- Stable thanks to practical cube shape. The casing itself only gets slightly hot in use
- Accelerated heating-up rate in comparison with other electrical heating devices
- Heating element sealed in ceramic, therefore insensitive to external influences (spillages)
- Low operational cost due to the long life heating element and low power consumption of only 200 W, in spite of high temperatures of 700°C
| Depth: | 105 mm |
|---|---|
| Depth heating area: | 60 mm |
| Dimensions (WxDxH): | 100 x 105 x 105 mm |
| Heating area (WxD): | 60 x 60 mm |
| Heating capacity: | 250 W |
| Height: | 105 mm |
| Manufacturer Article Number: | 6060 000 |
| Max. temperature: | 700 °C |
| Max. voltage: | 230 V |
| Power supply: | 230 V, 50/60 Hz |
| Power supply frequency: | 50/60 Hz |
| Type: | PowerCube IRB 1 |
| Type of auxiliary energy: | Mains connection |
| Weight: | 700 g |
| Width: | 100 mm |
| Width heating area: | 60 mm |
Login
Other customers also bought
Laboratory heating device for the safe, rapid heating of large samples. Can be used anywhere, even where standard burners with an exposed flame cannot be used.Heats up quickly, constant heatingNo open flames, no soot, odourlessIntegral continuous electronic power adjustment between 0% and 100%Casing safe to touch even when hotBuilt-in casing handles for safe transportInert ceramic, long-life heating elementBuilt-in overheat monitorProtection of electrical components against spilled liquidsAdditional side safety shield on burner elementIncludes four-arm support for flat bottom containers. By using an accessory bracket the burner can be mounted on a tripod
Accessories
Tripod bracket for mounting the PowerCube into a tripod stand. With stainless steel rod approx. 13cm long.
Power controller LR1 for continuous energy regulation between 0 to 100 %. Stand mounting device for fitting the Power Cube onto a retort stand. Stainless steel retort rod for attachment directly to the back of the casing, length approx. 13cm.