Qualitative Test papers Peroxtesmo
For the detection of peroxidase in milk (MI), in blood (KM) and in food (KO).
Qualitative Test papers Phosphatesmo
For the detection of phosphatase in milk (MI) and in sperm (KM).
Qualitative Test papers Wator
Wator allows the quick and easy determination of the water distribution in butter.
QUANTOFIX® Relax
Reflectance photometer for the evaluation of test stripsProgrammed for QUANTOFIX test strips. The system simplifies testing procedures and the decision processes by eliminating the subjectivity of visual readings and by providing higher accuracy.Touch-Display5 methods preset, any other methods can be selectedAutostart functionMeasured value output in the displayFixed power supply and battery operationMemory for 200 measurementsNo gradation and estimation of in-between values is necessaryVery simple operation, precise resultsPrinting and data transfer, simple documentationOutput of intermediate valuesSpecificationsDimensions (W x D x H ):160 x 200 x 75 mmWeight:710 gPower requirements:Netzteil 110 ... 240 V AC Batteriebetrieb mit 6 AA Batterien
QUANTOFIX® test strips
For semi-quantitative determinations.* Test strips with reagent** Box with 60 test strips and reagent*** CE-marked according to the directive for medical products 93/42/EWG.
Quick-connect couplers
For retrofitting compression-proof deionisers from Evoqua (For other manufacturers on request).
Rack for Imhoff sedimentation vessels, Nalgene®, acrylic
Transparent, sturdy frame for three 1000 ml Imhoff sedimentation vessels.
Rack for sedimentation cones, PMMA/PP
For two sedimentation cones made of plastic.
Rapid Tests, Pooltester
The Pooltester is designed for the simultaneous determination of the most popular water treatment agents and the pH value. Each pool tester contains tablets in foil for every 20 analyzes and a multilingual user manual.
Reagent kits NANOCOLOR®
The standard tests are convenient reagent kits for photometric analysis. Even very low limits can be evaluated precisely, due to high sample volumes and the measurement in 50 mm cuvettes.
Reagent sets for analyzer Alyza IQ NH4
Ammonium reagents for wet chemical reactions.
Reagent sets for analyzer Alyza IQ PO4
Phosphate reagents for wet chemical reactions.
Reagent Sets for Determination of Free Chlorine
For use with Hach instruments. For determinations acc. to DPD method. Powder pillows and refills for Swiftest dispensers are EPA conform.
Reagent solutions for photometers Lovibond®
Solution with 15 ml or refill bottle with 100 ml.* Refill bottle
Reagents VARIO for Photometer Lovibond®and HACH®
Suitable for Lovibond®Photometers as well as for Photometers of company HACH®**HACH® is a registered trademark of HACH® Company, Loveland, Colorado. Using brand HACH® contains no indication of a connection to this company or to a possible agreement of HACH® Company to composition, examination or suitability for use in spectrophotometers or other equipment or systems, which are sold under the brand HACH®.
Reagents VISOCOLOR Powder Pillows Phosphate
For photometric determination of phosphate in drinking water, surface water and waste water analysis.
Reference oil
Plant-based reference oil for calibration and adjustment of the cooking oil tester. To do this, simply immerse the measuring device in the reference oil heated to 50 °C while in calibration mode. The displayed measured value can be compared and noted or the device can be adjusted to this value. Bottle with 100 ml content.
Reference Standard Kit
The reference standards are designed to check the accuracy and the reliability of the results. The shelf life of reference standards is two years from the date of production, provided that storage and use are in accordance with the instructions provided.Applications: Water Treatment, Waste Water, Cooling/Boiler Water, Pool-Water, Beverage Industry, Laboratory and Field Testing.
Reference standard kit pH for photometers MD series
The reference standards are used to check the photometric detection accuracy and reproducibility of measurement results. Adjustment of the photometers is not possible with the reference standard kits. When checking the photometers with the reference standard kit, the appropriate method is selected and the measured value in mg/L is compared with the reference value of the standard kit. The shelf life is two years from the date of manufacture if used and stored properly.For instruments with tablet reagent.
Reference standard kits Chloride for photometers MD series
The reference standards are used to check the photometric detection accuracy and reproducibility of measurement results. Adjustment of the photometers is not possible with the reference standard kits. When checking the photometers with the reference standard kit, the appropriate method is selected and the measured value in mg/L is compared with the reference value of the standard kit. The shelf life is two years from the date of manufacture if used and stored properly.For instruments with tablet/liquid reagent.
RESPIROMETRIC Sensor System 6 BOD
Measuring systems for the reliable determination of 90 to 4000 ppm BOD, BOD5 and BOD7 for the control of water and wastewater quality.Complete with sensor heads and multi-position magnetic stirring station for performing aerobic and anaerobic respiration tests. Measurement data is transmitted wirelessly from the RESPIROMETRIC sensor head to a PC via the Databox™. The Databox™ can store results from up to 48 RESPIROMETRIC sensors. With the RESPIROSoft™ software, these measurement data can be evaluated and monitored on the PC. Alternatively, the Databox™ can be connected to the Velp Ermes cloud platform. After registration, measurement data can also be monitored and analysed from mobile devices.4-digit LED display2-button user interfaceResults available in BOD (mg/l) and pressure (mbar)Automatic conversion of pressure results into BODWireless transmission of data to the PC (Wlan)Scope of supply: 6-position magnetic stirring station, 6 x sensor heads incl. batteries, 6 x 500 ml amber bottles, 6 x KOH containers, 6 x magnetic stirring barsBOD range:90 ... 4000 ppmPressure range:500 ... 2000 mbarMeasuring period:5 ... 30 daysDimensions sensor (W x D x H):50 x 70 x 70 mmDimensions stirring station (W x D x H):270 x 185 x 300 mmWeight sensor:80 gWeight stirring station:1 kgPower supply sensor:2 x CR 2430Power supply stirring station:230 V, 50 ... 60 HzIP code:IP54
RESPIROMETRIC Sensor System 6 Maxi
Measuring system for the reliable determination of the anaerobic respiration of the biochemical methane potential (BMP) of biomass. The BMP analysis examines biogas production from organic waste for waste and wastewater treatment, as well as renewable energy production.Complete with sensor heads and multi-position magnetic stirring station. Measurement data is transmitted wirelessly from the RESPIROMETRIC sensor head to a PC via the Databox™. The Databox™ can store results from up to 48 RESPIROMETRIC sensors. With the RESPIROSoft™ software, these measurement data can be evaluated and monitored on the PC. Alternatively, the Databox™ can be connected to the Velp Ermes cloud platform. After registration, measurement data can also be monitored and analysed from mobile devices.4-digit LED display2-button user interfaceResults available in pressure (mbar) and BMP (NmLCH4/gSV)Automatic conversion of pressure results into BMPWireless transmission of data to the PC (Wlan)Also suitable for other anaerobic studiesScope of supply: 6-position magnetic stirring station Maxi, 6 x sensor heads incl. batteries, 6 x 1000 ml bottles, 6 x KOH containers, 6 x magnetic stirring barsPressure range:500 ... 2000 mbarMeasuring period:1 ... 180 days (pressure) / 10 ... 60 days (BMP)Dimensions sensor (W x D x H):50 x 70 x 70 mmDimensions stirring station (W x D x H):432 x 165 x 300 mmWeight sensor:80 gWeight stirring station:3 kgPower supply sensor:2 x CR2430Power supply stirring station:230 V, 50 ... 60 HzIP code:IP54