RESPIROMETRIC Sensor System 6, plastic biodegradability
Measuring systems for the reliable determination of the degree of biodegradability of plastic materials in an aqueous medium.Complete with sensor heads and multi-position magnetic stirrer for performing aerobic respiration tests. Measurement data is transmitted wirelessly from the RESPIROMETRIC sensor head to a PC via the Databox™. The Databox™ can store results from up to 48 RESPIROMETRIC sensors. With the RESPIROSoft™ software, these measurement data can be evaluated and monitored on the PC. Alternatively, the Databox™ can be connected to the Velp Ermes cloud platform. After registration, measurement data can also be monitored and analysed from mobile devices.4-digit LED display2-button user interfaceResults available in pressure (mbar)Magnetic stirrer with timer and electronic speed controlWireless transmission of data to the PC (Wlan)Scope of supply: 6-position magnetic stirrer MULTISTIRRER Digital, 6 x sensor heads incl. batteries, 6 x 1000 ml bottles, 6 x kits for plastic biodegradability analysis, 6 x magnetic stirring barsPressure range:500 ... 2000 mbarMeasuring period:1 ... 180 daysDimensions sensor (W x D x H):50 x 70 x 70 mmDimensions magnetic stirrer (W x D x H):230 x 370 x 51.5 mmWeight sensor:80 gWeight magnetic stirrer:1.75 kgPower supply sensor:2 x CR2430Power supply magnetic stirrer:100 ... 240 V, 50 ... 60 HzIP code:IP54Speed range magnetic stirrer:80 ... 1500 rpmStirring position distance magentic stirrer:100 mm
RESPIROMETRIC Sensor System 6, soil analysis
Measuring systems for the soil analysis to support aerobic degradation tests on soil and compost. The analysis provides microbial soil respiration results from the mineralisation of organic substances.Measurement data is transmitted wirelessly from the RESPIROMETRIC sensor head to a PC via the Databox™. The Databox™ can store results from up to 48 RESPIROMETRIC sensors. With the RESPIROSoft™ software, these measurement data can be evaluated and monitored on the PC. Alternatively, the Databox™ can be connected to the Velp Ermes cloud platform. After registration, measurement data can also be monitored and analysed from mobile devices.4-digit LED display2-button user interfaceResults available in pressure (mbar)Measurements directly in a 1000 ml Erlenmeyer flaskWireless transmission of data to the PC (Wlan)Scope of supply: 6 x sensor heads incl. batteries, 6 x 1000 ml Erlenmeyer flask, 6 x kits for soil analysisPressure range:500 ... 2000 mbarMeasuring period:1 ... 180 daysDimensions sensor (W x D x H):50 x 70 x 70 mmWeight sensor:80 gPower supply sensor:2 x CR2430IP code:IP54
Round cells, empty
Cuvettes for photometric routine and water analytics in the UV-VIS and VIS range.
Sample cuvettes for Pocket Colorimeter DR300
Sample cuvettes for spectrophotometric measurements in water analysis.
Sample cuvettes for Turbidity meter Eutech™ TN-100
Made of borosilicate glass. With screw cap, fill line and indexing mark.
Sample Glass 300 ml
For sample volumes up to 200 ml in volume or 5 g in weight.
Secchi Disk
For determining the depth of visibility and light permeability of water. Sturdy design made of strong, hard-wearing plastic. Lead weight for better lowering. The approx. 15 cm high rod is fitted with an eyelet for fastening the lowering engine. The lowering line is marked in intervals of 100 cm with figures from 1 to 10 and in between additionally with line markings each 50 cm for better reading of the depth of visibility while the disk is being lowered.Lowering line, please order separately.
Secondary turbidity standards Gelex
Each set contains one sealed cuvette with the indicated concentrations.
Sedimentation cone, plastic, SAN
Imhoff pattern. DIN 12672. Transparent SAN (Styrene acrylonitrile). With screw cap for draining the contents. Temperature-resistant up to max. 85°C.
Sedimentation cones acc. to Imhoff, borosilicate glass 3.3
Scale: up to 1000 ml, ring mark: at 1000 ml, subdivision: 0.1 ml (0-2 ml), 0.5 ml (2-10 ml), 1 ml (10-40 ml), 2 ml (20-100 ml), 50 ml (100-1000 ml).
Sedimentation cones Imhoff pattern, SAN
DIN 12672. Screw cap allows drainage. Withstands temperatures up to 85 °C.
Sedimentation cones, accessory stand, Acrylic/PP
Acrylic/PP. To hold two Imhoff sedimentation cones. Compact and easy to transport even when fully loaded.
Sedimentation cones, borosilicate glass 3.3
Imhoff pattern. DIN 12672. Graduations and inscriptions in contrasting white enamel. Ring mark at 1000ml.* No subdivisions from 100 to 1000 ml.
Sedimentation unit set, Nalgene®, PC
Transparent, shockproof, with easily readable white graduations. Sedimentation and centrifuge tests for sludge quality are used in the analysis of the active sludge deposition process.Scope of delivery: Jar and cover (PC), scoop (PP), 10 x 15 ml conical centrifuge tubes (PC), with caps (PP), manual and data sheet.
Semi-quantitative test strips
Swimming Pool Test 3 in 1This test allows the quick and easy determination of the water quality in swimming pools. It provdies valuable results about the total alkalinity, free chlorine and pH.Free chlorine: 0.5 - 1 - 3 - 5 - 10 mg/L Cl2Alkalinity: 80 - 120 - 180 - 240 mg/L CaCO3pH: 6.4 - 6.8 - 7.2 - 7.6 - 8.4Swimming Pool Test 5 in 1Test strip for semi-quantitative determination of free and total-chlorine, alkalinity, pH and total-hardness in pool water.Chlorine, free: 0.5 - 1 - 3 - 5 - 10 mg/L Cl2Alkalinity: 80 - 120 - 180 - 240 mg/L CaCO3pH: 6.4 - 6.8 - 7.2 - 7.6 - 8.4total Chlorine: 0 - 1 - 3 - 5 - 10 mg/L Cl2total Hardness: 0 - 100 - 250 - 500 - 1000 mg/L CaCO3Ozone TestThis test is used for the quick and easy determination of ozone in air.Range: <90, 90 - 150, 150 - 210, 210 µg/m3 ozone
Serial Extraction Apparatus behrotest® for Soxhlet-/Fat-Extraction
behrotest® serial heaters are the economical and user-friendly solution for the classic Soxhlet or fat extraction:complete with reaction vessels, extraction spacers and coolersenergy for each sample position is individually adjustablecooling water distributor ensures even cooling at all sample positionspractical stand for holding the condensers securely between extractionsmounts for holding the extraction spacers after removing the sample vesselsS models: The extractors with stopcock do away with the need for any additional distillation after extraction
Serial heating unit for reflow distillation
Complete equipment for reflux distillation, consisting ofHot bench, 4 or 6 heating positionsStanding basinStand rodsCooling water distribution with condenser rack and cooler standReaction flaskBehr high performance glass coolers
Short Distilling Apparatus
For micro quantities, modified distilling link, Göttingen type, for loss-free working with small quantities of substances, consisting of:Microdistill with 2 joints cone NS 14,5/23 and 1 joint NS 10/19Distribution spider with 3 cones NS 14,5/23 and 1 socket NS 14,5/233 small flasks, 5 ml, NS 14,5/23Two neck flask, 50 ml, with 2 joints NS 14,5/23Stopper NS 14,5/23Thermometer with ground joint, NS 10/19, 0 to + 250 °C5 ground joint clamps NS 14,5
Skim Milk Butyrometer
With frosted label on bulb, without stopper.*Stopper Cat. No. 9.112 576 please order separately.
Skim milk butyrometer, borosilicate glass
Skim milk butyrometer according to Sichler’s method, with rounded scale.
Skim milk butyrometer, borosilicate glass
Skim milk butyrometer according to Kehe’s method.
Skim milk butyrometer, borosilicate glass
Skim milk butyrometer according to Siegfeld’s method.
Spectrophotometer NANOCOLOR® Advance
The spectrophotometer NANOCOLOR® Advance, with Reference Detector Technology (RDT), provides precise and reliable measurement and can be used in the entire spectrum of water and wastewater analysis. It can also be used mobile due to its rechargeable battery. With an additional 860 nm LED, the device determines the nephelometric turbidity during each measurement of a tube test and warns of incorrect results.Backlit colored 5" display with touch screenFully automatic cuvette recognition via the integrated 2D barcode scannerEvaluation of NANOCOLOR® tube tests (16 und 24 mm), standard tests (10, 20, 40, 50 mm) and VISOCOLOR® Powder PillowsOver 200 pre-programmed tests and special methods, 99 fully programmable methods, absorbance, transmission, factor, kinetics, 2-point calibration, scan, nephelometric turbidity measurement 1-1000 NTUScope of supply: Spectrophotometer NANOCOLOR® Advance, manual (quick start guide), protective covering, power supply unit with country specific adapters, USB stick, calibration cuvette, certificate, cleaning clothSpecificationsOptical system:Single beam photometer with grating monochromatorWavelength range:340 ... 800 nmWavelength accuracy:± 2 nmWavelength reproducibility:± 0.1 nmSpectral bandwidth: 4 nmPhotometric range:± 3.0 A in the range 340 ... 800 nmScattered light: 0.5 %Light source:Halogen lampData memory:1000 measured values / spectraInterfaces:2 x USB (Host), 1 x USB (Function)Dimensions (W x D x H): 280 x 325 x 130 mmWeigth: 3.8 kgPower supply:110 ... 240 V, 12 V 3A DCProtection class:IP67
Spectrophotometer photoLab® 7100 VIS and photoLab® 7600 UV-VIS with OptRF
COD measurement without reagents.The spectrophotometer of the photoLab® 7000 Series are universally usable and offer complete photometricfunctionality with lauded user-interface and guidance on a brilliant HD 7"" color display. Pioneering is the optical reagent-free measurement (OptRF) of COD, Nitrate and Nitrite. No time-consuming digestion and no harmful chemicals required.Proven routine analysis for waste and drinking water, aquaculture, food & beverage, environmental monitoring and productionCost saving reagent-free OptRF measurementUniversal for industrial, research and educational useLab quality in the field: 4,5 kg light weight, with car battery and field case optionLinking lab with Online-system WTW® IQ SENSORNET via IQ LabLinkFor 16 mm round cuvettes and 10, 20 and 50 mm rectangular cuvettes with automatic recognitionMemory for 5000 values, spectra and kinetics approx. 40 MB, equivalent to approx. 500 spectra (300-900 nm) and 400 kinetics with 150 measured valuesMore than 200 programmed methods, 1000 user defined methods, 20 profiles each for kinetics and absorption spectrum, extensive programming optionsRoutine Analysis:More than 250 programs for commercial test kits, standard parameters, direct readings of coloration, SAK, etc. as well as user-defined programming of routinesBarcode recognition for tests in vials and rectangular cells and automatic cell recognition for 16, 10, 20 and 50 mm without adapter and automatic measurement range selectionUp to three parallel timersOptional PC-Software Package for Brewery and color measurement from CIE to YellownessSpectral and universal analysis from 190 to 1100 nm:Spectral scans in various nm-steps, 700-2000 nm/minKinetics and multi-wavelength readings including special methods like chlorophyll and ADMI color measurementExtensive programming tools for multistep and multi-wavelength functions with user guidanceAQA: Multi-level user-friendly AQA functions with administration tools and comprehensive checking aids for meter and reagents.Data Management:Measurement data, PDF documents, spectra and kinetics data, with data filter for pre-selected data managementExternal barcode reading option for uncoded test kits and sample IDOptional: PC-Software for GLP compliant data management
Spectrophotometers XD 7000 VIS and XD 7500 UV-VIS
UV-VIS and VIS spectrophotometers with dual beam optics. The instruments benefit from a barcode test recognition system, over 150 pre-programmed analytical methods and automatic cuvette detection. Analytical quality assurance procedures include checks of the photometer, the total system (including methods) and sample matrix effects. Further functions of the spectrophotometers include measurement of transmission and absorbance, scanning of spectra, kinetics analysis and creation of user-defined methods.Premium optical system with reference beamAutomatic test recognition with internal barcode readerSupports round cuvettes with 13, 16, 24 mm and rectangular cuvettes with 10, 20, 50 mmAutomatic cuvette type detectionMore than 150 analytical methods implemented7'' colour display and keypadEthernet, USB20 user profiles possibleUp to 1000 user programmesCreation of up to 100 further user-defined methodsPassword protection possibleSpecificationsXD 7000 VIS // XD 7500 UV-VISOptical System:grid monochromator with reference beamWavelength range:320 - 1100 nm // 190 - 1100 nmBandwidth:4 nmWavelength accuracy:±1 nm on all Holmium peaksWavelength repeatability:better than 0.5 nmPhotometric range:-3.3 to +3.3 AbsPhotometrical resolution / Transmission:0.001 Abs / 0.1%Photometric accuracy / repeatability:0.003 Abs below 0.6 Abs 0.5 % from 0.6 to 2.0 AbsPhotometrical linearity:1% up to 2.0 Abs between 340 to 900 nmDrift:0.005 Abs per hour after 15 minutes heat up timeInternal Storage:40 MB for approx. 5000 data setsLamps:Tungsten-halogen-lamp // Xenon flash lampDimension (W x D x H): Weight:422 x 323 x 195 mm approx. 4.5 kgPower supply: Protection class:100 - 240V, 50/60 Hz IP 30
Stand for Imhoff Sedimentation cones, PP
The stand for sedimentation funnels is used to keep, hold or store Imhoff funnels safely and reliably during sedimentation. Two funnel holders ensure that Imhoff funnels will be held safely and securely and can be placed in an absolutely vertical position. Stand with two holders for sedimentation funnels, suitable for funnels 90 mm or more in diameter. Thanks to an innovative magnet concept no clamping screws are necessary. The height of the funnel holder can be adjusted easily and flexibly with one hand. With the corresponding accessory the holders for Imhoff funnels can also be replaced by holders for all-purpose funnels.PP, chrome-plated steelAdjustable height up to 450 mmFor funnels with Ø 90 mm or more
Standard Kjeldahl block digestion systems K 8, K 12 and K 20
Block digestion systems for standard Kjeldahl digestion vessels with a volume of 250mlHigh performance heating and fume exhaust by means of a fume manifold. 25, freely configurable, programmes for block temperature and digestion time. Stable and robust construction. Basic stand for digestion vessels and exhausing hood are made from acid-resistant, stainless steel.
Standard Kjeldahl block digestion systems K 8, K 12 and K 20
Block digestion systems with high-quality corrosion-resistant block housing made of stainless steel. With 8, 12 or 20 sample slots for standard Kjeldahl digestion vessels with a volume of 250 ml. High-efficiency heating and extraction hood with exhaust collector.behr single-knob control for particularly easy and fast programming.Menu navigation in national language.25 freely configurable programs for block temperature and digestion time.Applications can be saved.USB interface.The removable inspection door on the insertion rack enables the progress of the digestion to be observed.Complete systems with digestion vessels, rack and extraction hood.