Flat ground flange reaction vessels, jacketed
Flange with groove in accordance with DIN 12214. Flask with thermostatic jacket and type "T" 10mm bore PTFE drain valve.Further accessories and spare parts available on request.
Flat ground flange reaction vessels, unjacketed
Flange in accordance with DIN 12214. Basic flask, without fittings.Form:A = cylindrical formB = short form* with flat bottom** Graduation, blue
Fork clamps for spherical joints
Material: stainless steel. For spherical ground joint connections. With set screw.
Four-neck round-bottom flask, with parallel side necks, DURAN®
Reaction flasks acc. to DIN 12392 and in addition to DIN standard, with 3 parallel side necks, with conical ground joints, with inscription label.
Gas inlet tube with valve stopcock, DURAN® tubing
Made of DURAN® tubing. With valve stopcock for dosing, with glass olive (angle: 90°).
Gas inlet tubes, bent, DURAN® tubing
Made of DURAN® tubing. Bent air leak tubes (angle: 90°), built-in length: 250mm, with NS cone and thin capillary (easily to draw by burner).
Gas inlet tubes, straight, ground glass joint, DURAN® tubing
Made of DURAN® tubing. Straight air leak tubes, built-in length: 200mm, with NS cone and thin capillary (easily to draw by burner).
Gas wash bottle reservoirs, borosilicate glass 3.3
In accordance with Drechsel.
Gas wash bottle reservoirs, Drechsel, borosilicate glass 3.3
According to DIN 12596. Bottle heads are supplied with or without sintered glass support (of porosity 0) which enables efficient gas dispensing. Bottle and selected head should be ordered seperately.
Gas washing bottle heads, DURAN® tubing
Acc. to DIN 12596. DURAN® tubing. Cone NS 29/32.
Gas washing bottle heads, DURAN® tubing, with filter disc
Acc. to DIN 12596. DURAN® tubing. Cone NS 29/32.
Gas washing bottle reservoirs, Drechsel, borosilicate glass 3.3
In accordance with Drechsel. Ground joint 29/32. DIN 12463. Flask height 200 mm, working height 250 mm.
Gas washing bottle, PP
Graduated 250ml polypropylene cylinder with a stable extended base for use in precipitating elements from gas.Gas is dispersed through a removable fitting that has a coarse grade porosity, polyethylene dispersion discSilicone stopper holds 6.3mm O.D. tubes for entrance and exit of gas0.5 psi maximum pressure
Gas washing bottles acc. to Drechsel, complete, DURAN® tubing
Bottle, DURAN®. Head made from DURAN® tubing, with screw connections. Head available with or without filter disc, insert height adjustable, central screw cap: GL 45, lateral screw caps: GL 14.
Gas washing bottles acc. to Drechsel, with glass olives
Acc. to DIN 12596, complete with head (with filter disc)Material head: DURAN® tubing
Gas washing bottles acc. to Drechsel, with glass thread
Acc. to DIN 12596, complete with head (with filter disc)Material head: DURAN® tubing
Gas washing bottles acc. to Drechsel, without Filter
Acc. to DIN 12596, complete with headMaterial head: DURAN® tubing
Gas washing bottles acc. to Drechsel, without Filter, with thread connections
Acc. to DIN 12596, complete with headMaterial head: DURAN® tubing
Gas washing bottles Duran®, acc. to Drechsel
With screw-connection system. The insertion height of the head is adjustable.Porosity 1Autoclavable
Gas washing bottles Duran®, with filter disc
Standard ground jointPorosity 1Autoclavable
Gas washing bottles Duran®, with fused-in filter disc
Standard ground jointPorosity 1Autoclavable
Gas washing bottles, Borosilcate glass 3.3
VitraPOR®head with fritted disc, standard taper joint.
Gas washing bottles, FEP/PTFE
PTFE top with two threaded connections. The standard PTFE frit has a pore size of approx. 3 µm and is screwed on the riser tube with an M8x1 thread. It can be exchanged with the PTFE gas distributor with fine bores which needs a lower primary pressure.Temperature resistance: from -200°C to 250°CTransparentUnbreakableFrit easily exchangeable
Gas washing columns, FEP/PTFE
PTFE top with two threaded connections. The standard PTFE frit has a pore size of approx. 3 µm and is screwed on the riser tube with an M8x1 thread. It can be exchanged with the PTFE gas distributor with fine bores which needs a lower primary pressure.Temperature resistance: from -200°C to 250°CTransparentUnbreakableFrit easily exchangeable
GL screwthread ferrules, bent
Screw connector caps made of PPS, ferrules made of PFA, with flexible PFA sealing rim and FPM O-ring. When in use, the contents only come into contact with PFA.
GL screwthread ferrules, straight
Screw connector caps made of PPS, ferrules GL14 and GL18 made of PFA, GL25 and GL32 made of PTFE, with flexible sealing rim and FKM O-ring. When in use, the contents only come into contact with PFA or PTFE.
Glass beads type M, soda lime glass
Polished. Density: 2.50 kg/dm3. Supplied in packs of approx. 1kg.
Glass beads type P, soda lime glass
Polished precision glass beads with a tolerance of ± 0.02 mm. Density: 2.58 kg/dm3.
Glass beads, borosilicate glass
For distillation applications. Specific gravity approx. 2.5 g/cm3. Capacity 1 kg.