Distilling links with Liebig condenser and olive, DURAN® tubing
Made of DURAN® tubing. Distilling links with Liebig condenser, outlet with NS cone, water connection with glass olives, with socket NS 14/23 for distillation thermometers of 55mm built-in length.
Distilling links with Liebig condenser and vacuum receiver adapter, DURAN® tubing
Made of DURAN® tubing. DIN 12596. With Liebig condenser at 75° and vertical outlet with NS cone and vacuum connection with glass olives or thread GL14. With socket NS 14/23 for distillation thermometers of 55mm built-in length.
Distilling receivers acc. to Bernauer, DURAN®tubing
Made of DURAN®tubing. With 3 cones NS 14/23,vacuum connection with glass olive.
Distilling receivers to Anschütz-Thiele, bent, DURAN®tubing
Made of DURAN®tubing. Receiver with bent adapter, graduated. With cone and socket, GL18 vacuum connection.Stopcock with glass or PTFE key.
Distilling receivers to Anschütz-Thiele, straight, DURAN® tubing
Made of DURAN® tubing. Receiver with straight adapter, graduated. With cone and socket, vacuum connection thread GL 18. NS stopcock with solid glass or PTFE plug.
Distribution tube
Distribution tubes with frit (porosity: 0), for specific light solvents, made of DURAN® tubing.
Distribution tubes with frit, DURAN® tubing
Made of DURAN® tubing. Distribution tubes with frit (porosity: 0), for specific heavy solvents.
Distributors for distilling receivers to Bredt, DURAN® tubing
Made of DURAN® tubing. With four cones NS 14/23, for round bottom flasks up to 250ml volume.
Draining set for Synthesis reactors EasySyn Advanced and Starter
For tension-free installation of temperature hoses on reactor vessels. The venting and draining valves are attached directly on the stand and allow clean and easy draining of the thermal fluid.Scope of supply: Venting valve, draining valve, 2 x temperature hoses to connect the reactor vessel with the valves
Dropping Funnels, cylindrical, borosilicate glass 3.3, with PTFE key stopcock
Cylindrical shape, with NS socket and NS cone, incl. retaining device. Graduated for reading the approx. volume.
Dropping Funnels, cylindrical, borosilicate glass 3.3, with solid glass key stopcock
Cylindrical shape, with NS socket and NS cone, incl. retaining device. Graduated for reading the approx. volume.
Dropping funnels, cylindrical, with pressure equalizing tube, Borosilicate glass 3.3
PTFE stopcock, PE stoppers. Cylindrical shape, with pressure equalising tube. ISO 4800 and DIN 12242.
Dropping funnels, cylindrical, with pressure equalizing tube, borosilicate glass 3.3, with glass key
Cylindrical shape, with pressure equalizing tube. With NS socket and NS cone, plug with retaining device.
Dropping funnels, cylindrical, with pressure equalizing tube, borosilicate glass 3.3, with PTFE key
Cylindrical shape, with pressure equalizing tube. With NS socket and NS cone, plug with retaining device.
Dropping funnels, cylindrical, without pressure equalizing tube, Borosilicate glass 3.3
PTFE stopcock, PE stoppers. Cylindrical shape, without pressure equalising tube. ISO 4800 and DIN 12242.
Drying tubes, DURAN® tubing, bent
Made of DURAN® tubing. Calcium chloride tubes. With one bulb. Internal dia. up to bulb: 13 mm.
Drying tubes, DURAN® tubing, straight
Made of DURAN® tubing. Calcium chloride tubes. With one bulb. Internal dia. up to bulb: 13 mm.
Drying tubes, PP
Removable stoppers at both tube ends. With tubing nozzles, Ø 8 - 10 mm.
Drying tubes, U-shaped, DURAN® tubing
Made of DURAN® tubing. U-shape, side tubes plain or with olives (outer dia. 6 mm).
Drying tubes, U-shaped, DURAN® tubing, with interchangeable ground joint stopcocks
Made of DURAN® tubing. DIN 12616. U-shape, side tubes plain or with olives (outer dia. 6 mm).
Erlenmeyer flasks with ground joint, DURAN®
Acc. to DIN EN ISO 4797 and in addition to DIN standard, with scale (approx. volume / ml), with inscription label.
Erlenmeyer flasks with NS neck, PP
For general laboratory use.Food safeAutoclavable
Erlenmeyer flasks, NS neck, borosilicate glass 3.3
Borosilicate glass 3.3. Conformed to DIN EN ISO 4797. NS necks are in compliance with DIN 12242 standards. Inscriptions are in white enamel which is specially designed for glass use.
Erlenmeyer flasks, NS neck, borosilicate glass 3.3, amber
Borosilicate glass 3.3, amber. Conformed to DIN EN ISO 4797. NS necks are in compliance with DIN 12242 standards.
Expansion adapters, DURAN® tubing
Made of DURAN® tubing. DIN 12257 and in addition to DIN standard. Expansion adapters with ground joint.
Extractor heads for specific heavy solvents, DURAN® tubing
Made of DURAN® tubing. For the extraction of liquids with specific heavy solvents, with insert filter (porosity: 0).
Extractor heads for specific light solvents, DURAN® tubing
Extractor heads for the extraction of liquids with specific light solvents, with insert filter (porosity: 0), made of DURAN® tubing.
Fittings with connecting thread, PTFE for Reactor lids
With NPT screw thread. Universal chemical resistance. With hexagonal gripping surface in standard wrench size. Temperature resistant from -200 to 250 °C
Flat bottom flasks with conical ground joint, DURAN®
According to DIN EN ISO 4797 and in addition to DIN standard, with inscription label.
Flat bottom flasks, NS joint neck, borosilicate glass 3.3
Resistant to heat and almost all chemicals. According to DIN EN ISO 4797.
Flat flange beakers, DURAN®
Flanged neck with groove for vacuum use. Maximum 0.5bar working pressure at 250°C. Capacities indicated are brim-full volumes. We recommend that these beakers are heated in water or oil baths. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.
Flat ground flange lids, DURAN®
With four ground joint necks as outlined below. 1 bar max. operating pressure at 250 °C. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.