Instrument disinfectant Korsolex® basic
Aldehyde-containing disinfectant for manual reprocessing of thermolabile and thermostable instruments.Broad spectrum of activity, including virucidal and sporicidal activity against C. difficileHigh material compatibilityRKI listing A and BUse biocides safely. Always read the labelling and the product information before use.
Instrument Disinfection neodisher® SeptoClean
The 2 step detergent and disinfectant, with only one process chemical guarantees perfect cleanness and hygienic safety, especially suitable for the facilitated reprocessing of thermolabile instruments.Liquid concentrateBactericidal, yeasticidal, virucidal, prion inactivating and dekontaminatingHigh material compatibilityUse biocides safely. Always read the labelling and the product information before use.
Kontakt IPA
High purity isopropanol for cleaning video and audio magnetic recording heads. Cleans drives and rubber rollers, removes gummed lubricants from small gears and cleans optical glass, mirrors, etc. Also suitable for removing water-resistant felt-tip pen ink from smooth surfaces. Evaporates quickly without residue, without leaving marks or traces of corrosion on blank metal surfaces.
Laboratory autoclaves CertoClav Connect
Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.The fully automated, vertical laboratory autoclave is suitable for extended/ long- term cycles, material tests, HAST Test, Pressure Cooker Test, ICP-TM 650, culture media preparation, sterilisation of waste, unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials and rubber. It is operated with a 7-inch, robust, high-resolution touch screen. All operating steps are explained with videos directly on the CertoTouch. Individual sterilisation programs, which include several time and temperature steps can also be created directly on the CertoTouch. Once the autoclave is connected to the Internet via WLAN, it can be connected to the CertoCloud, an automatic process documentation. With this automatic documentation, the autoclave meets all GLP requirements.Automatic venting in fractional flow processElectric exhaust vapour valveElectronic safety lockTime and temperature individually editableEthernet, LAN, WiFiHeating integrated in the floorScope of supply: Autoclave, CertoTouch screen, instrument tray, PT100 media sensor, power cable, CertoCloud basic license
Laboratory autoclaves CertoClav MultiControl 2
Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.The PT100 sensor-controlled, vertical laboratory autoclave is suitable for extended/ long- term cycles, material tests, HAST test, Pressure Cooker Test, ICP-TM 650, culture media preparation, sterilisation of waste and biological hazardous substances (S2), unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials and rubber.With the control unit only programs that include just one time and one temperature step can be set. For programs that include several time and temperature steps, the PC software professional version is required.Microprocessor-controlledAutomatic venting in fractional flow processElectronic process controlAutomated error detectionProgrammable from 1 minute to 30 days and from room temperature to 140 °CControl unit with LCD displayUSB portPrinter port (RS232) for printing sterilisation protocolsHeating integrated in the baseScope of supply: Autoclave, MC2 control unit including instrument tray, power cable, PC software basic version
Laboratory autoclaves D-line
The features of the laboratory autoclave line are specifically designed for most common laboratory applications and can be used for the sterilzation of liquids, instruments, glass, waste and for the preparation of nutrient media.EL = horizontal loadingELV = vertical loadingEL-CGD and ELV-CGD = with integrated steam generator and rapid coolingStores the last 200 cycles in built-in memoryOption: second flexible Pt 100 probe30 Identification Codes and Passwords for access level controlThe controller and software comply with the 21 CFR part 11 standardFilter replacement notifications based on the number of cyclesData archiving via USB interfaceDouble sterilization time monitoringIn/Out test (enables technicians to check each system component separately)Sterilization temperature range up 105 °C to 137 °COptional Disinfection/Isothermal Temperature range from 60°C to 105°C7 standard sterilisation programsOptions available Fast cooling technology and ventilator to reduce cooling time additionallyVacuum pump to evacuate residual airExhaust air filtrationLifting device to elevate/to lower heavy sterilzation goodsPrinter to document the performed cycle (Please order separately)R.PC.R software allows complete control and monitoring of the autoclave
Laboratory brushes assortment
Set consisting of:Pipette brush Ø 5 mm, L 500 mm (9.019 010)Reagent bottle brush with wool tip Ø 10 mm, L 190 mm (9.019 020)Reagent bottle brush with wool tip Ø 30 mm, L 270 mm (9.019 040)Reagent bottle brush with head bundle Ø 10 mm, L 250 (9.019 030)Bottle brush with head bundle Ø 50 mm, L 330 mm (9.019 050)Bottle brush with head bundle Ø 60 mm, L 470 mm (9.019 060)Beaker brush Ø 85 mm, L 390 mm (9.019 070)Beaker brush Ø 85 mm, L 430 mm (9.019 080)Beaker brush Ø 100 mm, L 430 mm (9.019 090)Beaker brush Ø 100 mm, L 630 mm (9.019 092)
Laboratory Flask Holders ZF, stainless steel for insert baskets SONOREX
For fixing of labortory flasks in insert baskets, precise fitting without additional tools. Compartment sizes can be set individually and varied quickly.Scope of delivery:ZF 10: 5 x 155 mm and 3 x 215 mm laboratory flask holdersZF 28: 9 x 215 mm and 4 x 420 mm laboratory flask holders
Laboratory glass cleaner deconex® 12 PA-x
Mildly alkaline concentrate for the highest cleaning requirements. Thanks to its high swelling capacity, it is also effective against stubborn residues. Chlorine-free. Excellent rinsability. For manual cleaning. Gentle, also suitable for very sensitive laboratory equipment and optical and electronic parts. Can also be used in ultrasonic cleaning systems.
Laboratory glass cleaner deconex® 15 PF-x
Alkaline cleaning concentrate for manual use. Universal. Can be used for immersion baths and ultrasonic devices, as well as for automatic pipette cleaning machines. Suitable for phosphate-critical applications, e.g. in environmental and water laboratories. High cleaning performance without introducing phosphates into waste water. Easily biodegradable. Low application concentrations for perfect results.Phosphate-freeChlorine-freeResidue-free rinsing
Laboratory glass cleaner deconex® 22 LIQ-x
Alkaline cleaner. For automated use. Universal laboratory use for completely residue-free cleaning of laboratory glassware and reusable laboratory materials.Chlorine-freeSurfactant-freePhosphate-free
Laboratory glass cleaner deconex® 25 ORGANACID
Acidic neutralising agent against carried-over alkali residues. For automated cleaning. Shortens the rinsing phases and reduces the consumption of rinsing water. Can also be used as a pre-rinse agent or cleaner, e.g. against limescale residues. Also suitable for aluminium and sensitive materials.Chlorine-freeSurfactant-freePhosphate-freeRinses off residue-free
Laboratory glass cleaner deconex®11 UNIVERSAL eco
Ecological cleaning agent for manual cleaning of laboratory utensils.Free from phosphates, halogens and EDTAEffective even in hard waterExtended shelf life: 3 years compared to 2 years for deconex® 11 UNIVERSAL
Laboratory Tissues zetRoll®, white, 51 sheets
Roll with 51 sheetswet-resistantabsorbentlow lint
Laboratory wipes, KIMTECH SCIENCE*, 2-ply
Tissue wiping cloth for professional use in laboratories. Highly absorbent and soft for wiping up small amounts of liquid and for cleaning pipettes and microscope slides. Chemical resistant and chemically neutral. 2-ply, white. Anti-static.
Lids for Sonorex ultrasonic baths
Stainless steel.For covering bath tanks, as outlined below.
Lids for Sonorex Technik ultrasonic baths
Lids protect against evaporation and reduce operating noise.
Liquid concentrate for disinfection and cleaning, terralin® protect
For surfaces requiring hygienic safety, for odor-sensitive areas, for sensitive materials (such as acrylic glass). Based on aromatic alcohols, quaternary ammonium compounds, amphoteric glycine derivatives and nonionic surfactants.Aldehyde freeFresh, subtle fragranceUse biocides safely. Always read the labelling and the product information before use.
Liquid descaling agent rea-calc®
Removes encrusted and stubborn dirt rapidly, automatically and carefully, including boiler and urine scale, limescale deposits, scum lines, grease and protein residues, proven in the removal of residues in the case of sinks, toilets, shower rooms, swimming pools, fittings, massage showers, hot water heaters, coffee machines, immersion heaters, stainless steel sinks, animal cages, urine bottles, bedpans and laboratory vessels.Removes cement residue and layers of grime on tilesFree of hydrochloric and formic acidDoes not develop any pungent and acrid odourVery economical: 2 to 5 % working concentration
Liquid Rapid Cleaning Agent rea-sol®
Ideal for the laboratory, extremely easy to use, cleans materials such as glass, porcelain, rubber, plastics and metals rapidly, automatically and carefully of oil, grease, wax, resin, silicone, blood, protein and serum residues.With anti-corrosion additives (avoid longer exposure times in the case of aluminium and zinc!)Graduations are not attackedSensitive tests are not influencedAlso suitable for cleaning and decontamination of walls and floorsFree of chlorine and caustic alkalisReplacement to a broad extent for chromosulfuric acidGood skin toleration and non toxicEnvironmentally friendly, as the active agents are biologically degradableExtremely economical: 1 % working solution, can be used several timesAlso suitable for ultrasonic baths
LLG-Cellulose tissue, supplied in stacks
Unbleached or highly bleachedPack quantity: 1 x 5kg
LLG-Cleaning brushes
Excellent tools for washing and cleaning of all type of laboratory bottles, flasks, tubes, condensers, burettes, etc. Brush material is manufactured from highest quality of fibre/perlon for long life cycle. Brush stem is manufactured from corrosion proof twisted steel wire. Brush handle is manufactured from polyproylene and offers extreme easy handling and use of the brush. Unique handle design enables hanging of the brush to a convenient place for easy reach. Spherical sponge top part enables access to every corner of the labware and guarantees perfect cleaning results.
LLG-Draining racks, PE-coated wire
Wall or bench mounting for 50 reagent bottles and 5 flasks.With drip channel and plastic covered feet.Dimensions (L x W x H): 360 x 130 x 650 mm.
LLG-Hand towel dispenser
White plastic, easy to refill, with window to observe the filling level, suitable for towel up to 245 mm width.