Ferrules, mini, Graphite/ Vespel®
High quality ferrules made of 15 % Graphite / 85 % Vespel®.
Gas and vapor sampler kit
The gas and vapor sampler enables spot collection of environmental gas samples or low pressure gas streams in 200 cm3 impervious resealable bags. Ideal for field analysis.Scope of supply: Canister, bulb, 10 bags, marker pen, instructions
Gas chromatography flow meter GF500
Convenient digital flow meter for the simple, accurate and repeatable measurement of flow in gas chromatographs. User friendly, handy design. Can be used with the carrier gases Air, Hydrogen, Nitrogen, Helium, Carbon dioxide, Argon and Argon/Methane. OLED display shows flow rate and further information. With pressure and temperature compensation. Suitable for columns with diameters of 100, 180, 200, 250, 320, 450, 530 and 750 µm.Measurement of flow rate, linear velocity and split ratioHigh resolution25 point calibration, traceable to National StandardsRechargeable batteryAuto power offScope of supply: Flow meter with case, tubings, tubing adapter fittings, tubing clips, tie-wraps, universal charger with USB connector, operation manual, calibration certificate.Please order adapters for direct connection to the detector separately.SpecificationsRange:0…500 ml/min. (0…300 ml CO2)Accuracy:0.4 ml/min. / ±2.5 %Resolution:0.1 ml/min.Operating temperature:15…35 °C, calibrated at 21±2 °CInlet pressure:max. 175 kPaDimensions:68 x 30 x 130 mmWeight:150 g
Gas filters
Gas filters are an essential part of GC analysis as contaminants in gases can significantly impact the quality of results. Oxygen, hydrocarbons and moisture can lead to problems such as noisy baselines, moisture entering the GC column and excessive bleed. The gas filter kit consists of a gas filter and a connection unit.Fast stabilization timesThe gas filter system consists of two key parts: the filters and the connecting unitThe connecting unit has inlet and outlet connectors for the gas linesThe connecting unit can be bench or wall-mountedCan be used in combination with other filtersIndicator color change tells you when to change your filter
Gas filters big trap
Gas filters are an essential part of your GC analysis as contaminants in gases can significantly impact the quality of results. Oxygen, hydrocarbons and moisture can lead to problems such as noisy baselines, moisture entering the GC column and excessive bleed.Heavy-walled aluminium tubeHigh capacity filtersSintered stainless steel frits prevent particulate contaminationSpecificationsVolume:750 cm3Pessure rating:up to 17.2 bar
GC Capillary columns HYDRODEX β-6TBDM
HYDRODEX cyclodextrin phases for enantiomer separationHeptakis-(2,3-di-O-methyl-6-O-t-butyldimethyl-silyl)-β-cyclodextrin. Phase diluted with optimised polysiloxane recommended for γ-lactones, cyclopentanones, terpenes, esters, tartrates.Max. temperature for isothermal operation: 230 °CMax. temperature for short isotherms in a temperature programme: 250 °C
GC Capillary columns HYDRODEX β-TBDAC
HYDRODEX cyclodextrin phases for enantiomer separationHeptakis-(2,3-di-O-acetyl-6-O-t-butyldimethyl-silyl)-β-cyclodextrin. Phase diluted with optimised polysiloxane recommended for alcohols, esters, ketones, aldehydes, δ-lactones.Max. temperature for isothermal operation: 220 °CMax. temperature for short isotherms in a temperature programme: 240 °C
GC Capillary columns LIPODEX® E
LIPODEX® cyclodextrin phase for enantiomer separationBase material: cyclic oligosaccharide consisting of eight glucose units bonded through α-1,4-linkages (y-cylodextrin) regioselective alkylation and acylation of the hydroxyl groups leads to a lipophilic phase, which is well suited for GC enantiomer analyses; important advantage: many compounds can be analysed without derivatisation (however, for certain substances enantioselectivity can be favourably influenced by formation of derivatives).Octakis-(2,6-di-O-pentyl-3-O-butyryl)-γ-cyclodextrin. Recommended for α-amino acids, α- and β-hydroxycarboxylic acid esters, alcohols (TFA), diols (TFA), ketones, pheromones (cyclic acetals), amines, alkyl halides, lactones.Max. temperature for isothermal operation: 200 °CMax. temperature for short isotherms in a temperature programme: 220 °C
GC Ferrules, Graphit/ Vespel®
High quality ferrules made of 15 % Graphite / 85 % Vespel®. 1/16" GC ferrule long.
GC Ferrules, Graphit/ Vespel®, Agilent style
High quality ferrules made of 15 % Graphite / 85 % Vespel®. 1/16" GC ferrule.
GC Ferrules, Graphit/ Vespel®, two-hole
High quality ferrules made of 15% Graphite / 85% Vespel®. 1/16" GC ferrule long.
High temperature septa
Preconditioned PTFE/silicone rubber septa. Maximum operatin gtemperature: 212 °C.
Hydrogen generator Precision Hydrogen SL
The smallest hydrogen generator from the Precision Hydrogen SL line, safely and continuously produces laboratory-grade hydrogen, with a purity of 99.9995 %, for GC-FID. This generator comes in a choice of manual water fill, auto water fill or with pressurised water fill.Minimal hydrogen storage in the systemVery low maintenance requirementsAuto-shutdown fail-safeSpecificationsPurity:99.9995 %Max. pressure:6.9 barRequired water quality:1.0 µS/cmGas connection:1 x 1/8" Swagelok compression fittingPermissible ambient temperature:10 ... 35 °CDimensions (W x D x H):160 x 355 x 250 mmWeigth:8,0 kgPower supply:100 ... 240 V, 50/60 HzWarranty:2 years
Hydrogen generators Precision Hydrogen
For the safe and continuous production of hydrogen with a purity of 99.9995% for GC and GC/MS.On-demand generation of high-purity hydrogen as detector gas for the FIDCompact, modular and stackable systemHydrogen production from deionised water using proton exchange membraneInternal leakage detection with automatic switch-off functionMinimal hydrogen storage in the systemFront LED touch screen with status displayCan be individually combined with PEAK zero nitrogen and zero air systemsSystems are available with different flow ratesVery low maintenance requirements3 years warranty on the hydrogen cellScope of supply: Hydrogen generator, 1 m Tygon® tubing, Deioniser column refill, barbed hose fitting, mains power cable for EU, UK and US, 2 x transit plugsSpecificationsPurity:99.9995 %Max. pressure:6.9 bar/100 psiRequired water quality:1.0 µS/cmGas connection:1/8" SwagelokPermissible ambient temperature:10 ... 35 °CDimensions (W x D x H):380 x 540 x 406 mmPower supply:110/230 V, 50/60 HzWarranty:3 years (cell) / 1 year (device)
Hydrogen generators Precision Hydrogen Trace
For the safe and continuous production of hydrogen with a purity of 99.99999% for trace analysis using GC, GC/MS and ICP.On-demand production of high purity hydrogen as carrier gas and detector gas for the FIDCompact, modular and stackable systemHydrogen production from deionized water using proton exchange membrane, pressure swing adsorption and carbon molecular sieveSystems are available with different flow rates, which can be combinedHighest purity due to regenerative PSA dryerAutomatic charging pump as standardInternal leakage detection with automatic switch-off functionMinimal hydrogen storage in the systemFront LED touch screen with status displayVery low maintenance requirements3 years warranty on the hydrogen cellScope of supply: Hydrogen generator, 1 m Tygon® tubing, Deioniser column refill, barbed hose fitting, mains power cable for EU, UK and US, 2 x transit plugsSpecificationsPurity:99.9999 %Max. pressure:6.9 bar / 100 psiRequired water quality:1.0 µS/cmGas connection:1/8" SwagelokPermissible ambient temperature:10 ... 35 °CDimensions (W x D x H):38.0 x 54.0 x 40.6 cmPower supply:110/230 V, 50/60 HzWarranty:3 years (cell). 1 year (device)
Inlet Liner for Agilent GC
Inlet Liner for Agilent 5890, 6850, 6890, 7890 und HP4890. Trajan's SGE inlet liners come as a complete, single packed unit. 5 or 25 packs, individually packed Complete with instrument appropriate o-rings and sealing rings Each pack is supplied with quality test results
Inlet Liner for Perkin-Elmer GC
Inlet Liner for Perkin-Elmer Autosystem and Clarus 500, 600. SGE's inlet liners come as a complete, single packed unit. 5 or 25 packs, individualy packed. Complete with instrument appropriate o-rings and sealing rings. Each pack supplied with quality test results.
Inlet Liner for Shimadzu GC
Liners come individually packed complete with instrument appropriate o-rings and sealing rings.Each pack is supplied with quality test results.Further liners und pack sizes available on request.
Inlet Liner for Thermo GC
Liners come individually packed complete with instrument appropriate o-rings and sealing rings. Each pack is supplied with quality test results. Further liners und pack sizes available on request.
Inlet liner SGE OptChem™, ConnecTite
Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)
Inlet liner SGE OptChem™, ConnecTite, with bottom hole
Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)
Inlet liner SGE OptChem™, ConnecTite, with top hole
Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)
Inlet liner SGE OptChem™, double taper
Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)
Inlet liner SGE OptChem™, FocusLiner®
Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)
Inlet liner SGE OptChem™, straight
Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)
Inlet liner SGE OptChem™, taper
Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)
Inlet liner SGE OptChem™, taper FocusLiner®
Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)
Inlet liner SGE OptChem™, taper, with glass frit
Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.Colour coded by geometryPre-fitted with CRS ONE O-ringsRecyclable, touchless packaging reduces the risk of contamination during installationQuality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)
Low Bleed Septa
Low Bleed, High Temperature septa are designed for maximum GC/MS performance for the lowest bleed possible at temperatures up to 400 °C. Ideal for use with Mass Spectrometers or in applications where septa bleed interferes with trace analysis.
Nitrogen generators Genius XE 35
Laboratory nitrogen generators for for high performance LC-MS, ELSD, small sample evaporators and other laboratory applications.Multi-Stage Purification™ producing analytical grade nitrogen gasTouch-screen full colour user interfaceHigh performance premium compressorsElectronic Compressor Optimisation™ (ECO) technology for low energy consumption and long compressor durabilityWith castersSpecificationsMax. flow rate:35 l/minPurity:95 ... 99.5 %Max. pressure:8 bar, 116 psiPermissible ambient temperature:15 ... 35 °CNoise level:56 dBADimensions (W x D x H):570 x 710 x 650 mmWeight:92 kgPower supply:230 V, 50/60 HzWarranty:2 year comprehensive manufacturer's warranty**Year 2 of warranty subject to generator being serviced at end of year 1 by a Peak-approved agent in accordance with fixed annual maintenance schedule.