Advanced Inverted Microscope for Industrial and Material science AE2000 MET
The AE2000 MET series is the ideal microscope for industrial quality inspection and material science. Different objective options allow applications in brightfield & darkfield or examination of larger samples.Infinity Optics [CCIS®]Observation Tube Siedentopf Type, Trinocular-/Phototube 45°, F.N. 20, 360° swivellingInterpupillary Distance 48-75 mmEyepieces High-Eyepoint N-WF 10x/20 mm with diopter adjustment on both eyepieces and rubber eyecupsSide facing quintuple nosepieceObjectives CCIS LM Plan achromat DIN 5X, 10X, 20X, 50XM32 with adapters to W 4/5" x 1/36" (RMS standard)Mechanical stage 280 x 192 mm surface with metal round and oval stage insertsX and Y range of 50 x 50 mmExternal lamphouse, Illumination 12 V/100 W halogen with intensity control and sleeping modeUniversal power supply 100-240 V (CE)Blue filter, Allen hexagonal key, vinyl dust cover and power cord
Advanced Microscope for Industrial and Material science, BA310 MET
The BA310 MET series is the ideal microscope for industrial quality inspection or material science. Different alternative stand options also allow applications in brightfield or examination of larger samplesInfinity Optics [CCIS®]Observation Tube Trinocular 30° (Light split 100:00/20:80), F.N. 20Interpupillary distance 48-75mmWidefield high eyepoint eyepieces N-WF10X/20mm with diopter adjustment on both eyepieces and rubber eyecupsReversed quintuple revolving nosepieceCCIS LM Plan Achromatic objectives 5X, 10X, 20X, 50XCoaxial course and fine focusing systemMechanical stage, hard coated with built-in low position coaxial stage controlEpi-illuminator 12V/50W quartz halogen with integrated field and aperture diaphragms and external lamphousePower supply 100-240V (CE)Power cord, Allen hexagonal key, vinyl dust coverThe BA310 MET series is the ideal microscope for industrial quality inspection or material science. Different alternative stand options also allow applications in brightfield or examination of larger samplesInfinity Optics [CCIS®]Observation Tube Trinocular 30° (Light split 100:00/20:80), F.N. 20Interpupillary distance 48-75mmWidefield high eyepoint eyepieces N-WF10X/20mm with diopter adjustment on both eyepieces and rubber eyecupsReversed quintuple revolving nosepieceCCIS LM Plan Achromatic objectives 5X, 10X, 20X, 50XCoaxial course and fine focusing systemMechanical stage, hard coated with built-in low position coaxial stage controlEpi-illuminator 12V/50W quartz halogen with integrated field and aperture diaphragms and external lamphousePower supply 100-240V (CE)Power cord, Allen hexagonal key, vinyl dust cover
Advanced Microscope for Industrial and Material science, BA310 MET-T
The BA310 MET series is the ideal microscope for industrial quality inspection or material science. Different alternative stand options also allow applications in brightfield or examination of larger samplesInfinity Optics [CCIS®]Observation Tube Trinocular 30° (Light split 100:00/20:80), F.N. 20Interpupillary distance 48-75mmWidefield high eyepoint eyepieces N-WF10X/20mm with diopter adjustment on both eyepieces and rubber eyecupsReversed quintuple revolving nosepieceCCIS LM Plan Achromatic objectives 5X, 10X, 20X, 50XCoaxial course and fine focusing systemMechanical stage, hard coated with built-in low position coaxial stage controlEpi-illuminator 12V/50W quartz halogen with integrated field and aperture diaphragms and external lamphousePower supply 100-240V (CE)Power cord, Allen hexagonal key, vinyl dust coverCoaxial course and fine focusing system, course focusing system adjustableTransmitted illumination of 6V/30W Quartz Halogen Koehler illumination with intensity controlBlue, frosted, green and yellow filtersInterchangeable LED modul for transmitted light available
Advanced Polarization Microscope for Laboratory, Research and Education, BA310 POL
An extremely powerful yet affordable Polarization microscope for Transmitted light samples. Designed for the examination of birefringent samples from petrography and mineralogy, and can also be used for the synthetic materials in industry.Infinity Optics [CCIS®]Observation Tube Siedentopf Type, Trinocular-/Phototube 30°, F.N. 20Interpupillary Distance 55-75 mmEyepieces High-Eyepoint N-WF 10x/20 mm with dioptre adjustment on both eyepieces and rubber eyecupsRotatable analyzer 360°, Bertrand lens 0,5X and slot for compensatorsReversed quadruple revolving nosepiece, single centrable positionsObjectives CCIS® EC Plan Achromatic Strain-free 4x, 10x, 40x-S, 60x-S360° circular rotating stage, 160 mm diameter, 1° increments, 0,1°vernier scale and lockableAchromat swing-out condenser N.A. 0.90/0.13 (strain-free) with iris diaphragm and rotatable polarizerKoehler illumination quartz halogen 6V/30 W with intensity controlUniversal power supply 100-240 V (CE)Empty insertion plate, blue filter, power cord, Allen hexagonal key, vinyl dust cover and spare fuse
Coating thickness gauge, digital, TC-FN-CAR
For non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.Automatic recognition of measuring mode (F or N)Simple and convenient 1-key operationWith integrated sensorSelectable measuring units: µm, inch (mil)Battery operationData interface RS-232Scope of supply: Coating thickness gauge, base plate, calibration foils, carrying case
Coating thickness gauge, digital, TE-F
For non-magnetic coatings on iron and steel. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.Selectable measuring units: µm, mlAuto-Power-OffBattery operationData interface RS-232Scope of supply: Coating thickness gauge, external sensor, base plate, calibration foils, carrying case
Coating thickness gauge, digital, TE-FN
For non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.Selectable measuring units: µm, mlAuto-Power-OffBattery operationData interface RS-232Scope of supply: Coating thickness gauge, external sensor, base plate, calibration foils, carrying case
Coating thickness gauges, digital, TB-F
For measuring of non-magnetic coatings on iron and steel. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.Selectable measuring units: µm, inch (mil)Auto-Power-OffBattery operationScope of supply: Coating thickness gauge, external sensor, base plate, calibration foils, carrying case
Coating thickness gauges, digital, TB-FN
For measuring of non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.Selectable measuring units: µm, inch (mil)Auto-Power-OffBattery operationScope of supply:Coating thickness gauge, external sensor, base plate, calibration foils, carrying case
Coating thickness gauges, digital, TF
For non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.LCD display, backlitScan mode allows continuous measurement or single point measuring modeMini Statistics Kit: displays the measured result, the average value and the max and the min valueInternal memory up to 99 valuesSelectable measuring units: µm, inch (mil)Data interface RS-232Scope of supply:Coating thickness gauge, base plate, calibration foils, carrying case
Coating thickness gauges, digital, TG
For non-magnetic coatings on iron and steel and coatings on non-magnetic metals. The Offset-Accur function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a higher accuracy of approx. 1 % of the measured value.LCD display, backlitScan mode allows continuous measurement or single point measuring modeMini Statistics Kit: displays the measured result, the average value and the max and the min valueInternal memory up to 99 valuesSelectable measuring units: µm, inch (mil)Data interface RS-232Scope of supply:Coating thickness gauge, external sensor, base plate, calibration foils, carrying case
Data transfer software AFH FAST for Digital force gauge
High speed data transfer software for force-time-measurements.Force measurements can be conducted over a very short period, i.e. seconds. A high speed data transfer to a PC is possible (with a transfer of up to 20 data sets per second) when combining the AFH FAST with force gauge. AFH FAST shows the results in a Force-Time-Graph and can export the data to MS Excel. Compatible with Microsoft Windows 7/8.1/10 operating systems. Incl. interface cable
Digital force gauge FC
The compact force gauge for tensile and compressive force measurements can be mounted on all SAUTER test stands.Turnable display with backlightPeak Hold functionMetal housingCapacity display: A bar lights up to show how much of the measuring range is still availableMeasuring with tolerance range (limit-setting function)Acoustic and optical signal when the measuring range is exceededInternal memory for up to 1000 measurementsData interface: USB, RS-232Rechargeable battery pack integratedScope of supply:Force gauge, hard carrying case, standard attachments, extension rod 90 mm
Digital force gauge FH-EXT
Force-measurement device with external, high-resolution measuring cell for very slight forces or loads in machines and plants.High-resolution displayPeak Hold ModeFunction to set limits: Input of an upper/lower limit valueVisual and acoustic signalData interface RS-232Rechargeable battery packSuitable for almost all SAUTER test standsScope of supply:Force gauge, mains adapter
Digital force gauge FH-M
Universal digital force-measuring devices for tensile and compressive force measurement with external measuring cell.Turnable display with backlightPeak Hold functionMeasuring with tolerance range (limit-setting function)Acoustic and optical signalAuto-Power-OffInternal memoryData interface RS-232Rechargeable battery pack integratedScope of supply:Force gauge, hard carrying case, tension loops, pressure plates, 3 m cable
Digital force gauge FH-S
Universal digital force gauges for tension and compression tests with integrated measuring cell.Turnable display with backlightDigital force gauge with internal sensorData interface RS-232Selectable measuring units: N, lb, kgPeak-Hold function to capture peaks (measurement result will be "frozen" for a short time) or Track function mode for a continuous measurement indication (period of time approx. 10 s)Function to set limits, programming of Max./ Min., in pull and push direction, with output of acoustic and optical signal. Ideal mode for efficient and accurate testing of standard partsAuto-Power-OffInternal memory for up to 10 measurementsMini Statistics Kit: calculates the average result from up to ten stored single results, min., max., nCan be mounted on all SAUTER test standsScope of supply: Force gauge, carrying case
Digital force gauge FH-S with screw-in tension clamp
Universal digital force gauges for tension and compression tests with integrated measuring cell.Turnable display with backlightDigital force gauge with internal sensorData interface RS-232Selectable measuring units: N, lb, kgPeak-Hold function to capture peaks (measurement result will be "frozen" for a short time) or Track function mode for a continuous measurement indication (period of time approx. 10 s)Function to set limits, programming of Max./ Min., in pull and push direction, with output of acoustic and optical signal. Ideal mode for efficient and accurate testing of standard partsAuto-Power-OffInternal memory for up to 10 measurementsMini Statistics Kit: calculates the average result from up to ten stored single results, min., max., nCan be mounted on all SAUTER test standsScope of supply:Force gauge, carrying case, screw-in tension clamp AE 500
Digital force gauge FK
Robust Push/Pull force gauge for simple measurement.Turnable display: automatic direction identificationSecure operability due to ergonomic designPeak-hold function to capture peaks (value is "frozen" for approx. 10 seconds) or Track function mode for a continuous measurement indicationSelectable measuring units: N, lb, kg, ozAuto-Power-OffCan be mounted on all SAUTER test stands
Digital force gauge FL-M
For tensile and compressive force measurement with external measuring cell.Graphics display with backlightPeak Hold ModeMetal housingCan be mounted on all SAUTER test standsCapacity display: A bar lights up to show how much of the measuring range is still availableMeasuring with tolerance range (limit-setting function)Internal memory for up to 500 measurementsContinuous analogue outputData interface RS-232, USBRechargeable battery operationScope of supply:Force gauge, carrying case, tension loops, mains adapter
Digital force gauge FL-S
Universal digital force gauges with integrated measuring cell.Turnable display with backlightCan be mounted on all SAUTER test standsMetal housingSelectable measuring units: N, kN, kg, oz, lbReal time or Peak Hold Mode to observe transcients or capture peaksCapacity display: A bar lights up to show how much of the measuring range is still availableMeasuring with tolerance range (limit-setting function):Upper and lower limiting can be programmed, in pull and push direction. The process is supported by an acoustic and visual signalInternal memory for up to 500 measurementsContinuous analogue output: Linear voltage signal in relation to the load (-2 up to +2 V)Scope of supply: Digital force gauge, hard carrying case, 3 standard attachments (FL 2K: with external measuring cell, tension loops and pressure plates, without standard attachments)
Digital force gauge FS
Force gauge with integrated measuring cell for tensile and compressive force measurement. If an external measuring channel is used, the internal load cell is deactivated as long as an external load cell is connected. Suitable for 4-wire and 6-wire sensors with strain gauges.3,5" touchscreenSimultaneous measurement on up to four channelsTwo-point adjustment with weights or numerical adjustment possibleExternal sensor data is stored directly in the connectorUSB interface for programming, data transfer and power supplyIntegrated SD card memoryTolerance functionTRACK function for continuous display of the measurementPeak value measurementRechargeable battery operationCan be mounted on all SAUTER test standsScope of supply:Force gauge, system case (systainer® T-LOC), plug-in power supply, USB cable type C
Digital torque measurement
For torque testing of bottles and other packaging with screw tops. Quick pin system: The four bottle mounts are pushed in, instead of being screwed in, to save time. This allows you to reconfigure quickly for other bottle sizes.Can be used in both directions of rotationMetal housingCapacity display: A bar lights up to show how much of the measuring range is still availablePeak hold mode to capture peaksFunction to set limits: Input of an upper/lower limit valueVisual and acoustic signalAUTO-OFF functionBack-lit LCD graphic displayInternal data memory saves up to 500 measurementsMemory contents can be transferred to the PC using optional softwareUSB and RS 232 data interfacesRubber feet with anti-slip featureScope of supply: Digital torque measurement, four bottle mounts with rubber coat, sturdy carry case
Drying pads grade 556
Absorbent paper strips for the removal of excess liquids, e.g., from microscope specimens (100 x 50 sheets).
Gloss meter TG 268
Versatile, portable gloss meter designed for fast and accurate measurement of low, medium or high gloss levels of coatings, plastics and related materials. The device is also suitable for large-scale uniformity checks in continuity mode.Basic, statistical and continuous measurement methodsDisplay of 5 data rows including storage capacity of more than 5000 data setsTFT 3.5 inch, capacitive touchscreenIntuitive, integrated software with icon guideUSB and RS 232 interfacesSupports ASTM D523, ASTM C584, ASTM D2457, BS3900 D5, DIN 67530, DIN EN ISO 2813, EN ISO 7668 and JI Z 8741 standardsScope of supply: Gloss meter, OnGloss software (PC), calibration plate, USB cable, external DC power supply, user manual (USB stick), carrying case, batterySpecificationsMeasuring angle:20° / 60° / 85°Measuring range:20°: 0 ... 2000 GU 60°: 0 ... 1000 GU 85°: 0 ... 160 GUResolution:0.1 GUEnvironmental conditions:0 ... 40 °C, 85% RHDimensions (W x D x H):160 x 75 x 90 mmWeight:350 gPower supply:3200 mAh Li-ion batteryStorage:Basic Mode: 1000 Statistical Mode: 5000 Continuous Mode: 5000
Incident and transmitted light microscopes Panthera TEC MAT
Incident and transmitted light microscopes for science materials, inspection of semiconductor components, LCD displays and wafers, equipped with an intelligent brightfield / darkfield illumination concept. The microscope models with additionally integrated LED transmitted light expand the application options in the direction of complex composite materials.Tube type Siedentopf, swivelingWidefield oculars for spectacle wearers with diopter adjustment on both ocularsCCIS® Plan Achromat & S-APO (PB free), DIN objectivesReversed coded nosepieceLED incident light illuminator with field and aperture diaphragm, with slots for polariser / analyser slidersWith interchangeable illuminationMotic LightTracer: Light memory, sleep mode (auto on-off), nosepiece LED light intensity and mode indicatorCoaxial coarse and fine focusing system with tension adjustmentIntegrated power supply with sleep modeUSB 2.0 for external camera powerAdditional equipment depending on the model with bright field (transmitted light), segmentable dark field (reflected light), polarization (reflected light)Scope of supply: Dust cover, power cord, allen key, screws for metal extension support
Jolting Volumeters
For determination of volumes before and after tamping and tamping density, as well as compaction. Acc. to European Pharmacopoeia, DIN ISO 787 part 11, ISO 3953, ISO 8967 and ASTM B 527-93.SpecificationsSpeed of camshaft:250 rpm ±15 rpmMotor rating:50 WDropping height of the guide punch:3 mm ±0.1 mmDimensions (W x D x H):Approx. 330 x 290 x 180 mm (without measuring cylinder)Net weight:Approx. 9 kgPower supply:230 V, 50 Hz
Leeb hardness tester, mobile
The Leeb hardness tester measures metallic samples and offers mobility and flexibility compared to stationary tabletop devices and testing devices with internal sensor.External impact sensorAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to 600 data groupsMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (Type A, B, C), Vickers (HV), Shore (HS), Leeb (HL), Brinell (HB)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsMeasuring with tolerance range (limit-setting function):Upper and lower limiting can be programmedAcoustic and visual signalMatrix display: Backlit multi-function displayRobust metal housingScope of supply:HK-D: Mobile Leeb hardness tester, hard carrying caseHK-DB: Mobile Leeb hardness tester, hard carrying case, standard block for calibration, hardness approx. 800 HLD
Leeb hardness testers, mobile, HMM, with printer
Advanced features for demanding applications.Impact (rebound) sensor: The bounce module is accelerated by a spring against the item being tested. Depending on how hard the object is, the kinetic energy of the module will be absorbed. The speed reduction will be measured and converted to Leeb hardness values.External impact sensor (Type D) includedAutomatic recognition of the impact (rebound) sensor connected to the HMMMobility: In comparison with stationary table-top devices and testing devices with an internal sensor, using the HMM offers the highest level of mobility and flexibilityAll measurement directions possible (360°) thanks to an automatic compensation functionStandard block for calibration included (approx. 790 ± 40 HL)Internal memory for up to 9 data groups, with up to 9 values per group forming the average value of the groupMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsDelivered in a hard carrying caseWireless IR printer included for on-site printing of measurement protocols (battery operated)
Leeb hardness testers, portable, HMM
Advanced features for demanding applications.Impact (rebound) sensor: The bounce module is accelerated by a spring against the item being tested. Depending on how hard the object is, the kinetic energy of the module will be absorbed. The speed reduction will be measured and converted to Leeb hardness valuesAutomatic recognition of the impact (rebound) sensor connected to the HMMMobility: In comparison with stationary table-top devices and testing devices with an internal sensor, using the HMM offers the highest level of mobility and flexibilityAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to 9 data groups, with up to 9 values per group forming the average value of the groupMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsAUTO-OFF function, battery level indicatorScope of supply:Leeb hardness tester, external impact sensor, standard block for calibration (approx. 790 ± 40 HL), carrying case
Leeb hardness testers, portable, HMO
Portable Leeb hardness tester for professional applications.Innovative touchscreenAutomatic recognition of the impact (rebound) sensor connected to the HMOAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to measurementsMini statistics function: Displays the measure value, the average value, the difference between the maximum and minimum values, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsRechargeable battery operationUSB interface for connection to the printer and charging the batteriesScope of supply:Leeb hardness tester, carrying case, standard block, mains adapter