Thermoregulators CORIO™ CP
CORIO™ CP thermoregulators are capable to control the temperature of external applications in combination with an optional pump set. Suitable for bath vessels with a volume of up to 50 l.For internal and external applications (accessories required)Bright, white, easily visible display, even from a distanceVery quietEasy operationLow-level warning systemPump switch for internal and external circulationPowerful, continously variable pumpUSB connectionRS232 interfaceClass III (FL) according to DIN 12876-1Scope of supply: Thermoregulator, mains power cable, bath attachment clamp
Thermostatic baths with polycarbonate tanks
The transparent polycarbonate baths are suitable for use up to 100°C. An immersion thermostat is mounted on the bath bridge for all models. With a pump adapter, this combination can also be used with external, closed applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore also suitable for external open applications.Temperature max.:100 °CTemp. Stability at 70 °C to DIN12876KISS E: CC-E:0.05K 0.02KSafety class:FL, IIIBath depth:150mm
Thermostatic controller Optima™ T100
Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use. The general purpose heating circulator offers excellent temperature stability and uniformity.Clear, bright 4 digit LED display3 programmable temperature pre-setsVisual alarm2 point recalibrationFixed over temperature cut-outFor use at temperatures below RT, the C1G or C2G cooler must be ordered additionally.Models with clamps available on request.
Thermostatic controller Optima™ TC120
Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use. The general purpose heating circulator offers excellent temperature stability and uniformity.Clear, bright 4 digit LED display3 programmable temperature pre-setsVisual and audible alarmTimer from 1 min to 99 h 59 min2 point recalibrationAdjustable over temperature cut-outPump for external circulationFor use at temperatures below RT, the C1G or C2G cooler must be ordered additionally.Models with clamps available on request.
Thermostatic controller Optima™ TX150
Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use. The advanced heating circulator features a modern, icon driven programming interface and full colour display.Large, bright full colour displayVisual and audible alarmTimer from 1 min to 99 h 59 min5 point recalibrationAdjustable over temperature cut-outPump for external circulationExternal temperature probeProgammable: Remote via PC/labtop, 1 program/30 segmentsRelay output to enable control of an external deviceUSB and RS232 interfaceFor using at or below room temperature you need additional flow coolers C1G or C2G.Models with clamps available on request.
Thermostatic controller Optima™ TXF200
Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use. The advanced heating circulator features a modern, icon driven programming interface and full colour display.Large, bright full colour displayVisual and audible alarmTimer from 1 min to 99 h 59 min5 point recalibrationAdjustable over temperature cut-outPump for external circulationExternal temperature probeProgammable: Direct via user interface or remote via PC/labtop, 10 programs/100 segmentsRelay output to enable control of an external deviceUSB and RS232 interfaceFor use at temperatures below RT, the C1G or C2G cooler must be ordered additionally.Models with clamps available on request.
Transfer racks for Eppendorf ThermoMixer™ C and ThermoStat C
Autoclavable transport aid for tubes from 0.5 to 2.0 mlFor transferring up to 24 tubes in / from the heating block at the same timeOffers protection against burns when transferring hot samples
Transparent bath tanks for immersion thermostats CORIO™ C/CD, PC
Transparent bath tanks made of PC for immersion thermostats CORIO™.
Transport Container VOYAGEUR
The containers of the VOYAGEUR series are particularly intended for the transport of biological samples. The liquid nitrogen is absorbed in a porous substance, so that the storage of the samples takes place in the gaseous phase and even in a possible accident no liquid nitrogen can leak or splash out.
Tray for Shaker VS 30 O / Shaking Incubator VS 150 OI
Anodised aliminium, 670 x 537mm. With holes to accept clamps for Erlenmeyer flasks and other acessories.
Tray for Shakers VS 15 series / Shaking Incubator VS 60 OI
Stainless steel, 450 x 450 mm. With holes to accept clamps for Erlenmeyer flasks and other acessories.
Tray for Shaking Incubator VS 45 OI
Stainless steel, 420 x 270 mm. With holes to accept clamps for Erlenmeyer flasks and other acessories.
Trays for Erlenmeyer flasks
Trays made of stainless steel for secure positioning of Erlenmeyer flasks in the shaking water bath.
Trays for Shakers VS 8 series
Made of stainless steel with holes to accommodate clamps for Erlenmeyer flasks and other accessory equipment.
Trays for shaking water baths OLS/LSB series
Versatile stainless steel trays. Designed to accommodate a variety of vessels. Adjustable spring configuration for maximum flask capacity.
Trays with test tube racks
Trays with test tube racks made of plastic (PP GF and PA GF) for tempering test tubes in shaking water baths.
Triac mains voltage regulator, MES 1000 / MES 2000
Electronic alternating current adjuster for easy control of resistance power equipment such as hotplates, soldering irons, light bulbs, infrared radiators, universal motor speed regulators, stirrers etc. With high rating fuse, 2 pin on/off luminous rocker switch and shielded, fused Schuko socket.Adjustment 10 to 230 V, fitted with an interference suppressor in accordance with EN standard.
Tube Furnaces
These compact tube furnaces with integrated control systems can be used universally for many processes. Equipped with a standard working tube of C 530 ceramic and two fiber plugs, these tube furnaces have an unbeatable price/performance ratio.Tmax 1200 °C or 1300 °CSingle-zoned design as standardDual shell housing made of sheets of textured stainless steelOuter tube diameter of 50 to 170 mm, heated length from 250 to 1000 mmWorking tube of C 530 ceramic including two fiber plugs as standard equipmentSolid state relays provide for lownoise operationAvailable with the programmable controllers B 510, C 550 and P 580 (for three-zoned design) with adjustable ramps and hold timesStandard power supply 400 V 3/N/PE 50/60 Hz (R 50/250 und R 50/500: 220 V, 1/N/PE, 50/60 Hz)Option:Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadCharge control with temperature measurement in the working tube and in the furnace chamber outside the tubeThree-zoned design (heated length from 500 mm)Working tubesGas supply systems for protective gas or vacuum operationProcess control and documentation with VCD software package
Tube Furnaces with Stand
These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, and their compact design, also make these tube furnaces suitable for integration into existing process systems.Vertical or horizontal operation freely adjustableWorking height freely adjustableWorking tube made of C 530 ceramicControl system integrated in furnace baseNTLog Basic for Nabertherm controller: recording of process data with USB-flash driveEquipped with the programmable controller B 510 (with touch panel, 5 programmes with 4 segments each), optionally available with the C 550 controller (with touch panel, 10 programmes with 20 segments each)
Tube tests for anaerobes Lovibond® Dipslides
The Lovibond® Dipslides are designed to test liquids as well as surfaces. They are ideal for use in many applications including evaporative cooling towers, closed water circuits, cutting fluids, food testing, and many more.Semisolid medium measures anaerobic bacteria and indicates microbial induced corrosion.
Tubes inserts, stainless steel for Shaking water baths Hydro
Inserts to be placed on the shaking tray.