Thermostatic controller Optima™ TC120
€0.00
Product information "Thermostatic controller Optima™ TC120"
- Clear, bright 4 digit LED display
- 3 programmable temperature pre-sets
- Visual and audible alarm
- Timer from 1 min to 99 h 59 min
- 2 point recalibration
- Adjustable over temperature cut-out
- Pump for external circulation
For use at temperatures below RT, the C1G or C2G cooler must be ordered additionally.
Models with clamps available on request.
| Depth: | 172 mm |
|---|---|
| Dimensions (WxDxH): | 141 x 172 x 333 mm |
| Heating capacity: | 1290 W |
| Height: | 333 mm |
| Manufacturer Article Number: | TC120 |
| Max. delivery pressure: | 0.21 bar |
| Max. flow rate: | 16 l/min |
| Max. temperature: | 120 °C |
| Max. voltage: | 230 V |
| Min. temperature: | +5 °C |
| Power supply: | 230 V, 50/60 Hz |
| Power supply frequency: | 50/60 Hz |
| Programmable: | No |
| Temperature: | RT+5 ... 120 °C |
| Temperature addition: | RT |
| Temperature stability: | ±0,05 °C (70 °C) |
| Type: | TC120 |
| Type of auxiliary energy: | Mains connection |
| Type of display: | LED |
| Weight: | 2.3 kg |
| Width: | 141 mm |
| With timer: | Yes |
Login
Other customers also bought
Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use. The general purpose heating circulator offers excellent temperature stability and uniformity.Clear, bright 4 digit LED display3 programmable temperature pre-setsVisual alarm2 point recalibrationFixed over temperature cut-outFor use at temperatures below RT, the C1G or C2G cooler must be ordered additionally.Models with clamps available on request.
Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use. The advanced heating circulator features a modern, icon driven programming interface and full colour display.Large, bright full colour displayVisual and audible alarmTimer from 1 min to 99 h 59 min5 point recalibrationAdjustable over temperature cut-outPump for external circulationExternal temperature probeProgammable: Remote via PC/labtop, 1 program/30 segmentsRelay output to enable control of an external deviceUSB and RS232 interfaceFor using at or below room temperature you need additional flow coolers C1G or C2G.Models with clamps available on request.
Accessories
High efficiency stainless steel (ST) tanks (range -15 °C to 200 °C). Drain tap included on ST12, ST18, ST26, ST38. Raised feet for carrying repositioning and retort access. Accessory polypropylene spheres or a lid must be used at temperatures between 60 °C and 100 °C. Above 100 °C only a lid must be used. Accessory cooling is required for temperatures below ambient.Please order lid and PP spheres separately.
Permits the remote set-up and programming of thermostats with interface from a PC. Real-time temperature / time profile and graphic representation of processes. Profile documentation and programme memory on disk. Minimum requirements: Microsoft Windows XP, Vista (32/64 bit), or Windows 7 (32/64 bit). Pentium III / Celeron 866 MHz or equivalent.
For attaching the thermostats to any vertical sided tank with a maximum wall thickness of 35 mm for rectangular tanks, 30 mm for circular tanks (300 mm diameter), and a capacity of up to 50 l.
Drain syphon SY1: For the rapid draining of baths.Heat exchange coil CW5: For use with precision and general purpose stirred baths. Temperature range 2 °C above coolant temperature. Coil diameter/l mm 77/55, pipe bore inlet/outlet 7mm.PP spheres PS20: Between operating temperatures 60 °C and 100 °C and below room temperature a lid or layers of polypropylene spheres can be used. Above 100 °C a lid must be used.