Steriliser SFplus
Safer than disinfection, hot-air sterilisation of containers and instruments.The safety feature for this hot air steriliser: Setpoint Wait. This means that the programme for sterilisation only starts when the set temperature has been reached. This feature can also be used with freely positionable Pt100 temperature sensors. Here the sterilisation time only begins when the set temperature has been reached at all measurement points, and reliable sterilisation is guaranteed at all times.Textured stainless steel housing, rear of zinc-plated steel, intuitively operated TwinDISPLAY(TFT colour display) with touchscreenYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.comAvailable parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertimeTwo Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an errorAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB portControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID functionDisplaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online loggingMultiple overtemperature protection: Electronic temperature monitoring TWW/TWB and mechanical temperature limiter TB acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN / MAX values for over/undertemperature alarm
Stirring heating mantles LabHEAT® KM-MER series
LabHEAT® - Heating mantles for flasks, round bottom. Designed and technical identical to series KM-ME, but in addition equipped with a magnetic stirrer; rotational frequency up to 1600 rpm max. heating element temperature 450 °C, 1.5 m power supply (earthed) cable and RCD (residual current detection).
Support basket for Water baths WTB
Support basket with perforated mounting shelf (stainless steel) with grid perforations to take clips for conical flasks (use of test tube racks not possible)
Support clamp KM-SK
LabHEAT®-Accessories for metal-cased heating mantles and serial heating unit to fix support rods up to diameter 12 mm or to integrate the metal-cased heating mantles within support wall.
Support stand for Ovens and Incubators Heratherm™
With casters. Height including casters 187 mm.
Temperature controllers, TEMPAT®-D
For controlling temperature of heating coils, hotplates, ovens, infrared radiators and water baths. TEMPAT®-D has a 10mm high, LED display which can even be seen in dark rooms and allows monitoring of actual temperature at any time. Set point can be entered via a 3 or 4 figure coding switch with 1°C resolution. Built-in sensor breakdown fuse, switching interval display and Xp trimmer to adjust variable gain amplification between 0 and 10K. Sensor connection is via a plug-in socket.Appropriate temperature sensor please order separately.If no temperature sensor is ordered, a loose plug is supplied.SpecificationsInput: Switching capacity:230V, 50/60Hz 2300W, 10AConnection, appliance:1.20M long connection cable with impact resistant plugConsumer load:earthed schuko socket, other plug-in connections in accordance with Swiss or French/Belgian standards, for example can be supplied at additional cost.Housing: Dimensions:Polycarbonate plastic, gray 188mm x 110mm x 70mmOn/off switch:via dipole luminous rocker switchProbe connection:via socketContact assignment Pt100:1 and 2Contact load:1 + 3Accuracy:±1% from measuring range value
Temperature controllers, TEMPAT®-DSI
Safety temperature controllers for regulating the temperature of heating coils, hotplates, ovens, infrared radiators and water baths with 7mm high LED display. A coding switch is provided for entering set points. For optimum safety: Irreversible safety contact breaker with secondary sensor input and dipole switch-off in the event of overtemperature or sensor malfunction. Visual and audible alarms. Critical temperature values are set using potentiometer and controlled via the display.Appropriate temperature sensor please order separately.For each operating two sensors per thermostat is required. Please order separately.Specifications Voltage: 220-235V, 50/60HzSwitching capacity:max. 1800VASwitching current:max. 8 AMeasuring accuracy:±1%Dimensions:188mm x 110mm x 70mmWeight:1.1kg
Temperature Probe Kit for Dry Block Heaters
Enables the unit to read actual block or sample temperature and display that temperature on the control panel. The optional External Temperature Probe Kit includes a stainless steel RTD PT100 probe, 457 mm stainless steel support rod, thermometer/temperature probe extension clamp and hook connector. The PT100 RTD probe is designed to fit perfectly in to the thermometer well of each modular block.
Temperature sensors for Laboratory regulator series KM-RX
LabHEAT®-sensors. Suitable for temperature control and KM-KM-RX1001 RX1004 with permanently attached cable, with or without diode plug.KM-TP2: Pt100, up to 400 °C, sheated element V2A, dia. 4 x 50 mm,KM-TPG: Pt100, up to 250 °C, glass tube, dia. 6 x 40 0mm,KM-TNS: NiCr-Ni, up to 1200 °C, rod sensor in Inconell, dia. 1.5 x 300 mmKM-TNF: NiCr-Ni, up to 400 °C, flat sensor, 0.4 x 15 x 400 mmFurther models available on request.
Temperature Test chamber TTC256
Simulate the perfect atmosphere for climate and temperature tests, specifically in accordance with DIN EN 60068-2-1, 2-2 and 2-3. Provide unlimited flexibility for controlled material and function tests as well as ageing tests.Ventilation and Control: high-performance air fan in working chamberdepending on operation status automatically variable fan speed with manual adjustment from 10 % to 100 %adaptive, fuzzy-supported multifunctional digital microprocessor PID-controllerautodiagnostic system with fault indication on temperature control2 x Class A, 4-wire circuit, Pt100 sensors, mutually monitoring and maintaining performance at the same temperature valuedigital 7-day-programme-timer with real time clock, precise minute settingintegral timer for heating profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hoursdigital display (LED) of all set parameters, such as temperature, weekdays, time, humidity and set-up values - language to be chosen in setupdigital display of set values (resolution: 0.1 °C below 99.9 °C, 0.5 °C above 100 °C) and actual values (resolution: 0.1 °C) of temperature (LED)long-term documenting (ring store) of all relevant data, GLP-conforming as data logger - 1024 kBprogramme stored on power failureparallel printer interface (incl. real-time clock with date function) for all PCL3-compatible ink-jet printers for GLP-conforming documentationUSB interface including Memmert "Celsius" software for programming and documentationchip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)incl. works calibration certificate for -20 °C and 160 °CHeating concept: high-performance ring heaters with optimised air circulationdoor heating to avoid condensateCooling Concept:twin compressorspeed adjustable condenser fanrefrigerant R449AMultiple Overtemperature Protection:with audible and visual alarm in case of over-/undertemperature and open doorindependently working, digitally adjustable electronic overtemperature controller, TWW protection class 3.3additional adjustable Auto-Safety-Function "ASF" for over- and undertemperature automatically following the set value at a preset tolerance rangemechanical temperature limiter TB class 1 switching the heating off at approx.10 °C above max. oven temperature
Test tube racks for shaking incubators MaxQ/Solaris™ and orbital shakers Solaris™
Test tube racks with adjustable inclination angle.
Test tube racks for shaking water bath, SR series
Stainless steel, 200 x 75mm. The OLS 26 holds up to 5 SR racks, LSB12 holds up to 3 SR racks and LSB18 holds up to 5 SR racks. Choice of 8 variants to accommodate different tube diameters and microtubes.
Test tube racks for shaking water baths SW, PP
Test tube racks made of PP. In combination with the separately available base tray, suitable for tempering test tubes in shaking water baths.
Test tube racks for shaking water baths SW, stainless steel
Test tube racks made of stainless steel. In combination with the separately available base tray, suitable for tempering test tubes in shaking water baths.
Test tube racks for water baths PURA™, shaking water baths SW and heating circulators CORIO™
Test tube racks made of plastic.Suitable for heating thermostats CORIO™ C and CD with the bath types B13, B17, B19, BT19, B27, BT27, B33.
Thermal beads for Water baths Precision
Thermal beads replace water in laboratory baths or ice in ice buckets to prevent contamination. A bath filled with Thermal Beads can be left unattended and is always available at the set temperature without danger of water evaporating to dryness.Small, non-uniform metal beads composed of a dry metallic thermal alloyCleaning with biodegradable disinfectant every 2 - 4 weeks onlyGood temperature stability and uniformityEnergy-efficientMinimizes maintenance such as emptying, cleaning, monitoring, and refilling the bathHolds common lab vessels in place without accessories such as racks, floats, and weights
Thermo Scientific™ Compact Digital Dry Bath/Block Heater S and D
Built-in temperature-sensing probe assists with outstanding temperature accuracy and controlDesigned for precise temperature controlFast heating rateMultiple combination of different size of blocks allows for maximum tube size versatility during experimental procedure12 V low voltage power inputModel S can hold 1 full block, 2 half blocks, 2 quarter blocks or 1 half Block and 2 quarter blocks.Model D can hold 2 full blocks, 4 half blocks, 8 quarter blocks or a combination of full/half and quarter blocks.Blocks are not included. Please order separately.Temperature RangeAmbient +2 °C ... 100 °CTemperature Accuracy at 37 °C≤ ± 0.5 °CTemperature stability at 37 °C≤ ± 0.5 °CHeating rate (30 °C to 100 °C, ambient at 25 °C, with one 0.2 ml block)16 min. // 20 min.Voltage100 ... 240 VElectrical Requirements12 V DC, 5 A // 12 V DC, 7 A
Thermo Scientific™ Digital Dry Bath / Block Heater
Thermo Scientific™ digital dry baths, which offer a range of configurations with interchangeable modular blocks for a variety of application needs.Designed for basic to advanced applications with a max temperature of 130 °C, a timer and available in 1, 2 and 4 block sizes.Digital controls and display of time and temperatureAdvanced internal temperature sensing probe for outstanding temperature accuracy and controlPrecise temperature control with PID circuitTemperature calibration enables to offset the temperature to desired valueTimer allows the user to accurately monitor the heating timeWide range of interchangeable aluminum alloy heat blocks provide versatility and allow for easy cleaning and disinfectingPowder-coated steel body construction ensures durabilityBuilt-in over-temperature protection device warrants sample and user safetyTemperature deviation adjustmentBlocks are not included. Please order separately.Relative Humidity≤ 80%Temperature Accuracy≤ ± 0.5 °CTimer0 ... 99:59 min or continuousControllerPID digitalTemperature RangeAmbient + 5 °C – 130 °C (Ambient at 25 °C)Power supply200 ... 240 V, 50/60 Hz
Thermo Scientific™ Digital Dry Bath / Block Heater Touch Screen
Thermo Scientific™ digital dry baths, which offer a range of configurations with interchangeable modular blocks for a variety of application needs.Designed for basic to advanced applications with a max temperature of 130 °C, a timer and available in 1, 2 and 4 block sizes.Touch screen control displays time and temperatureAdvanced internal temperature sensing probe for outstanding temperature accuracy and controlPrecise temperature control with PID circuitTemperature calibration enables to offset the temperature to desired valueTimer allows the user to accurately monitor the heating timeWide range of interchangeable aluminum alloy heat blocks provide versatility and allow for easy cleaning and disinfectingPowder-coated steel body construction ensures durabilityBuilt-in over-temperature protection device warrants sample and user safetyTemperature deviation adjustmentBlocks are not included. Please order separately.Temperature RangeAmbient + 5 °C ... 130 °C (Ambient at 25 °C)Temperature Accuracy≤ ± 0.5 °CTimer0 ... 99:59 min or continuousControllerPID digitalRelative Humidity≤ 80%Power supply200 ... 240 V, 50/60 Hz
Thermoblock NANOCOLOR®
An important step in photometric water analysis is the digestion of the sample. The heating blocks NANOCOLOR® VARIO 4 and NANOCOLOR® VARIO C2 guarantee a fast and safe performance of all required sample digestions in water and waste water analysis.Thanks to its active cooling function, the new NANOCOLOR® VARIO HC features, in addition to its quick heating phase, an equally fast cool-down time. Thereby, the instrument provides an even faster sample digestion, which leads to a siginifcant saving of time.With the new NANOCOLOR® VARIO Mini, its compact size and flexible power supply, sample digestions on the road are no longer a challenge.