Serial heating units series KM-R3
LabHEAT®-Heating elements for flasks, round bottom. Serial heating unit in plastic coated, chemical-resistant metal housing with three heating positions. Each heating position is separately controlled via controller, 1.5 m supply (earthed) cable and RCD (residual current detection).Size and rating specifications are valid for each heating position.
Serial heating units series KM-R6
LabHEAT®-Heating elements for flasks, round bottom. Serial heating unit in plastic coated, chemical-resistant metal housing with six heating positions. Each heating position is separately controlled via controller, 1.5 m supply (earthed) cable and RCD (residual current detection).Size and rating specifications are valid for each heating position.
Shaker platform for incubator shaker INC 125 FS digital
Clamps can be attached to the shaker platform for safe shaking of Erlenmeyer flasks.Please order clamps separately.
Shaking device for waterbaths WTB
Shaking device for waterbaths incl. support frame, shaking frequency 35 - 160 strokes per minute (horizontal back/forth movement), requires gable cover. Voltage 230 V, 50/60 Hz. Please order the support basket separately.
Shaking Incubator 211DS
Due to a small footprint, compact, stackable design and expanded temperature range, this shaking incubator is ideal for molecular biology and general use. With integral orbital shaker. Two full and one half shelves are supplied with each incubator.Temperature control system SmartChek™Internal electrical outletFlask capacity: 4 x 1 l, 5 x 500 ml, 9 x 250 ml or 16 x 125 mlGasket door with large viewing area
Shaking Incubator 311DS
Incubator with built-in orbital shaker. Stable temperature conditions and a broad temperature range enables the use of this incubator for cell cultures, washing blots, bacterial cultures, yeast cultures, entomology studies, egg hatching, hybridization washes, mixing and re-suspensions. Opening the door stops operation of the shaker. The incubator is supplied with one shelf.Temperature control system SmartChek™Broad temperature rangeHigh uniformity and accuracyGasket door with large viewing areaAdjustable shelvesFlat platform with non-slip rubber mat, flask platforms, additional shelves please order separately.
Shaking incubator ES-20/80
For mixing and incubation of samples in a variety of flasks and vessels.Touchscreen display for quick parameter settingBluetooth® connectivity to PC for data management, data logging, parameter control and profilingStackable up to 3 unitsHeat resistant brushless fanTimer alarmChamber made of stainless steelPlease order platforms separately.
Shaking incubator ES-20/80C with cooling
For mixing and incubation of samples in a variety of flasks and vessels.Touchscreen display for quick parameter settingBluetooth® connectivity to PC for data management, data logging, parameter control and profilingStackable up to 3 unitsHeat resistant brushless fanTimer alarmChamber made of stainless steelWith Peltier modules for cooling of -12.5 °C below ambient temperatureExcellent sample temperature uniformityPlease order platforms separately.
Shaking Incubator SIM-200D-M
The SIM-200D-M has been designed specifically to combine a bench top laboratoryincubator with the specific mixing action required for microtitre plates. With a tight orbit of 1.5mm and a high speed shaking action between 250rpm and 1250rpm even the smallest of vessels can be adequately mixed.To minimize sample evaporation the SIM-200D-M is supplied with stainless steel water trays, these are strategically placed within the unit to maintain a humidity of up to 80%, thus dramatically reducing sample evaporation over a 24 hour period.
Shaking incubator Solaris™, with Peltier cooling
Shaking incubator for demanding tasks in research, production, and for routine tasks. With variable speed and temperature adjustment.For timer and continuous operation99 individual programs can be storedSoft start avoids abrupt starting and stopping movementsImbalance detection with optical/acoustic alarm: the device stops until the incorrect loading has been correctedLarge, easy-to-read touchscreen display with speed, temperature, and run time indication10 languages selectableWith maintenance-free, brushless motorMonitoring of alerts, alarms, and interaction protocols for more safety and reproducibilityUSB and Ethernet connection for data output and device monitoringEasily removable platform and rounded corners for quick cleaningWith refrigerant-free, environmentally friendly Peltier coolingScope of supply: Shaking incubator, mains cable, universal platform, platform screws, manual
Shaking Incubator Varioshake VS 150 OI
The shaking incubators Varioshake are characterised by their highest quality, durability and absolute reliability. Their stable, low-wear mechanics ensure particularly quiet operation and reliable continuous operation. They are specially designed for mixing and shaking with precisely reproducible orbital motion and temperatures of up to 70 ° C.With optimal temperature distribution in the entire usable space and extensive functionalityWith »GFL Technology« for the highest quality, reliability and durabilityThe devices can be optimally equipped for every need thanks to the extensive range of accessories2 shaking levels. With 2 front doors.Scope of supply: Shaking incubator with shelf rackPlease order trays, attachments and accessories separately.
Shaking Incubator Varioshake VS 45 OI
The shaking incubators Varioshake are characterised by their highest quality, durability and absolute reliability. Their stable, low-wear mechanics ensure particularly quiet operation and reliable continuous operation. They are specially designed for mixing and shaking with precisely reproducible orbital motion and temperatures of up to 70 ° C.With optimal temperature distribution in the entire usable space and extensive functionalityWith »GFL Technology« for the highest quality, reliability and durabilityThe devices can be optimally equipped for every need thanks to the extensive range of accessories2 shaking levels. With 1 front door.Scope of supply: Shaking incubator with shelf rackPlease order trays and accessories separately.
Shaking Incubator Varioshake VS 60 OI
The shaking incubators Varioshake are characterised by their highest quality, durability and absolute reliability. Their stable, low-wear mechanics ensure particularly quiet operation and reliable continuous operation. They are specially designed for mixing and shaking with precisely reproducible orbital motion and temperatures of up to 70 ° C.With optimal temperature distribution in the entire usable space and extensive functionalityWith »GFL Technology« for the highest quality, reliability and durabilityThe devices can be optimally equipped for every need thanks to the extensive range of accessories1 shaking level. With acrylic glass hood.Scope of supply: Shaking incubator with moving tablePlease order trays, attachments and accessories separately.
Shaking incubator with cooling ISICMBCDG
The Incubating/Cooling Orbital Shaker is microplate ready without the need for any additional accessories. Optional modular blocks can accommodate micro-tubes, centrifuge tubes, vials, or culture tubes. Unit holds microplates or modular blocks with a 127 mm tall interior capacity. Ideal for analyses that require a stable, controlled temperature.Heats to 65°C and cools to 10°C below ambientLED displays for temperature, speed and timeTemperature Calibration ModeTriple Eccentric DriveOverload ProtectionSpeed Ramping FeatureAudible AlarmCaution Hot IndicatorPolycarbonate LidScope of supply: Thermo Shaker incl. adapter bracket for blocksWithout blocks. Please order separately.
Shaking incubator with rocking motion
The incubating rocking shaker combines smooth rocking motion with general purpose incubation applications in one compact benchtop unit.Electronic tilt angle adjustment during operation (0 to 15°)LED displays for temperature, speed, tilt angle, and timeTimer with audible alarm (1 s to 160 h)Temperature uniformity is ±0.5 °C at 37 °COverload protectionSpeed ramping featureCaution Hot indicatorPolycarbonate lidScope of supply: Shaking incubator incl. built-in tray and lid
Shaking incubator with tumbling motion
The incubating tumbling shakers combines smooth tumbling motion with general purpose incubation applications in one compact benchtop unit.Electronic tilt angle adjustment during operation (0 to 20°)LED displays for temperature, speed, tilt angle, and timeTimer with audible alarm (1 s to 160 h)Temperature uniformity is ±0.5 °C at 37 °COverload protectionSpeed ramping featureCaution Hot indicatorPolycarbonate lidScope of supply: Shaking incubator incl. built-in tray and lid
Shaking Incubators ES-20 / ES-80
Stable and reliable orbital shaker-incubator for vigorous or even mixing and incubation of samples in a variety of flasks and vessels. For Life Sciences, suitable for growing cell cultures in flasks, extracting tissue samples at physiological, temperatures, and sample preparation processes, mixing of biological liquids as well as the incubation and cultivation of biological liquids, growing e-coli, bioluminescence preparation.Variable speed: 50 to 250rpmDigital control of time, temperature and shaking speed for accuracy and repeatabilityDisplay 2-line 16 character LCDInterchangeable platforms for shaking/incubating different vessels (please order separately)
Shaking Incubators ISLD
The Incubating Light Duty Orbital Shakers are designed to heat and shake a variety of samples. The Microplate Shakers are optimized for shaking microplates, deep-well plates, or micro-tubes. Available with opaque lid for light sensitive samples.LED displays for temperature, speed and timeTimer with audible alarmCalibration mode for temperatureMicroprocessor ControlPID Temperature ControllerTriple Eccentric DriveLED DisplayTemperature Calibration ModeOverload ProtectionSpeed Ramping FeatureAudible AlarmSpill-Resistant DesignPolycarbonate LidScope of supply:04HDG: Shaking Incubator incl. built-in tray and lidMPHDG: Shaking Incubators incl. built in tray for microplates, deep-well plates, or micro-tubes and lidMPHDGL: as MPHDG, but with opaque lid
Shaking incubators SI-200D
These incubators with integrated orbital shaker are ideal for cell culturing procedures, especially suspension culture applications. Compact units for bench-top use.Microprocessor controlledForced air circulation for uniform chamber temperatureDigital display for temperature and speedTimer from 1 second to 9 daysUSB connectionUnique retractable platform for easy loading and unloadingWith alarm functionThese incubators with integrated orbital shaker are ideal for cell culturing procedures, especially suspension culture applications. Compact units for bench-top use.Microprocessor controlledForced air circulation for uniform chamber temperatureDigital display for temperature and speedTimer from 1 second to 9 daysUSB connectionUnique retractable platform for easy loading and unloadingWith alarm function
Shaking incubators SIC-200D-C
These incubators with integrated orbital shaker are ideal for cell culturing procedures, especially suspension culture applications. Compact units for bench-top use.Microprocessor controlledForced air circulation for uniform chamber temperatureDigital display for temperature and speedTimer from 1 second to 9 daysUSB connectionUnique retractable platform for easy loading and unloadingWith alarm functionCommunication capability for external temperature measurementOptional choice of angle adjustable accessory and tube rackConnection to optional RC-200-3 chiller for applications below ambient temperature possible
Shaking incubators, orbital, stacking, Certomat® BS-1, accessories
Insert tray, e.g. for petri dishesLighting unit, with five individual fluorescent tubes, for 230V 50 Hz supplies (only usable in units with cooling system)Base frame for supporting up to two Certomat BS-1 incubators, height: 230mm, with 4 height adjustable feetwelded construction, with impact resistant, stoved enamel finishPlatforms and holding clips:Type F: 800 x 420mmType FU: 800 x 420mmOnly a selection of the full range of accessories is shown here. Please enquire for further details.
Shaking tray, stainless steel for Shaking water baths Hydro
With holes to accept clamps for Erlenmeyer flasks and tube holders.
Shaking water bath OLS 26 Aqua Pro
A combined orbital/linear shaking bath for ultimate flexibility and usability. Combined orbital/linear motion in one bath, simply rotate tray carrier 180°Excellent temperature stability and uniformity of ±0.1 °CAdjustable shaking speed/intensity for application optimisationOrbital shaking radius: 9 mmLinear shaking stroke length: 18, 28, 36 mmSet and Forget™ technology - fast heat-up accurate temperature controlExtensive choice of trays for a wide variety of vessels. Trays sold separatelyIncludes adjustable high temp cut-off/alarm, countdown timer (1 to 999 min), presets, calibration facility and dry start/run dry protectionDiscreet magnetically coupled shaking mechanism maximises working areaUniversal frame and polycarbonate lid includedAccessory polypropylene spheres or a lid must be used at temperatures between 60 °C and 99 °C. Accessory cooling is required for temperatures below ambient. Please order PP spheres separately.
Shaking water bath SW
For simultaneous heating and shaking of samples, e.g. incubations, hybridizations etc.Microprocessor technology with PID temperature controlBright Multi-Display (LED) indicates five different temperature values and shaking speedSplash-proof mains switch, built into plastic membrane keypadEasy-to-use controlsTimer for selecting desired operating periodRS232 interface providedShaking frequency 20 to 200 strokes/min., with 15 mm strokeRemovable shaking carriageModel SW23 has an internal circulation pumpBath lid not included.