Transfer racks for Eppendorf ThermoMixer™ C and ThermoStat C
Autoclavable transport aid for tubes from 0.5 to 2.0 mlFor transferring up to 24 tubes in / from the heating block at the same timeOffers protection against burns when transferring hot samples
Tray for Shaker VS 30 O / Shaking Incubator VS 150 OI
Anodised aliminium, 670 x 537mm. With holes to accept clamps for Erlenmeyer flasks and other acessories.
Tray for Shakers VS 15 series / Shaking Incubator VS 60 OI
Stainless steel, 450 x 450 mm. With holes to accept clamps for Erlenmeyer flasks and other acessories.
Tray for Shaking Incubator VS 45 OI
Stainless steel, 420 x 270 mm. With holes to accept clamps for Erlenmeyer flasks and other acessories.
Trays for Erlenmeyer flasks
Trays made of stainless steel for secure positioning of Erlenmeyer flasks in the shaking water bath.
Trays for Shakers VS 8 series
Made of stainless steel with holes to accommodate clamps for Erlenmeyer flasks and other accessory equipment.
Trays for shaking water baths OLS/LSB series
Versatile stainless steel trays. Designed to accommodate a variety of vessels. Adjustable spring configuration for maximum flask capacity.
Trays with test tube racks
Trays with test tube racks made of plastic (PP GF and PA GF) for tempering test tubes in shaking water baths.
Triac mains voltage regulator, MES 1000 / MES 2000
Electronic alternating current adjuster for easy control of resistance power equipment such as hotplates, soldering irons, light bulbs, infrared radiators, universal motor speed regulators, stirrers etc. With high rating fuse, 2 pin on/off luminous rocker switch and shielded, fused Schuko socket.Adjustment 10 to 230 V, fitted with an interference suppressor in accordance with EN standard.
Tube Furnaces
These compact tube furnaces with integrated control systems can be used universally for many processes. Equipped with a standard working tube of C 530 ceramic and two fiber plugs, these tube furnaces have an unbeatable price/performance ratio.Tmax 1200 °C or 1300 °CSingle-zoned design as standardDual shell housing made of sheets of textured stainless steelOuter tube diameter of 50 to 170 mm, heated length from 250 to 1000 mmWorking tube of C 530 ceramic including two fiber plugs as standard equipmentSolid state relays provide for lownoise operationAvailable with the programmable controllers B 510, C 550 and P 580 (for three-zoned design) with adjustable ramps and hold timesStandard power supply 400 V 3/N/PE 50/60 Hz (R 50/250 und R 50/500: 220 V, 1/N/PE, 50/60 Hz)Option:Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadCharge control with temperature measurement in the working tube and in the furnace chamber outside the tubeThree-zoned design (heated length from 500 mm)Working tubesGas supply systems for protective gas or vacuum operationProcess control and documentation with VCD software package
Tube Furnaces with Stand
These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, and their compact design, also make these tube furnaces suitable for integration into existing process systems.Vertical or horizontal operation freely adjustableWorking height freely adjustableWorking tube made of C 530 ceramicControl system integrated in furnace baseNTLog Basic for Nabertherm controller: recording of process data with USB-flash driveEquipped with the programmable controller B 510 (with touch panel, 5 programmes with 4 segments each), optionally available with the C 550 controller (with touch panel, 10 programmes with 20 segments each)
Tube tests for anaerobes Lovibond® Dipslides
The Lovibond® Dipslides are designed to test liquids as well as surfaces. They are ideal for use in many applications including evaporative cooling towers, closed water circuits, cutting fluids, food testing, and many more.Semisolid medium measures anaerobic bacteria and indicates microbial induced corrosion.
Tubes inserts, stainless steel for Shaking water baths Hydro
Inserts to be placed on the shaking tray.
Universal attachment AS 4000.1 for Incubator Shaker KS 4000 i control/KS 4000 ic control
For various types of vessels. Infinitely variable clamping rolls allow universal adaptation to various vessels.Included with delivery: 1 x AS 1.400 Basic holder, 6 x AS 1.401 Clamping roll, 12 x AS 1.402 Fastening screw
Universal clip plate
Clip plate with 2 rubber bands for holding differently shaped containers. The clip plate can be attached to the magnetic platform.
Universal drying oven LLG-uniOVEN 42 and LLG-uniOVEN 110
Microprocessor controlled universal drying oven with forced convection including two shelves. Each shelf of the uniOVEN 42 and uniOVEN 110 has a load capacity of 20 kg, the total load capacity of each unit is 50 kg. The maximum number of shelves is 7 for uniOVEN 42 and 10 for uniOVEN 110 with a distance of 40 mm between shelves.Quick and intuitive operationMicroprocessor control with integrated auto-diagnostic systemForced convection with fanDigital display for time and temperatureTimer: 1 minute to 99.9 h and continuousDelayed start timer: 1 minute to 99.9 hOutlet for vapour exhaustionAcoustical and visible information for end of programAcoustical and optical alarm at temperature differencesInterior made of stainless steelAdjustable over temperature protection at 300 °CTemperature accuracy: ±1 °C (at 70 °C)Temperature uniformity: ±2 °C (at 70 °C)Scope of supply: LLG-uniOVEN incl. 2 shelves
Universal ovens UF
The all-round genius among heating ovens covers a multitude of applications, ideally at temperatures above 50 °C. The fresh air is preheated in the pre-heating chamber to avoid temperature fluctuations.Forced air circulationSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
Universal ovens UFplus
The all-round genius among heating ovens covers a multitude of applications, ideally at temperatures above 50 °C. The fresh air is preheated in the pre-heating chamber to avoid temperature fluctuations.Forced air circulationTwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Universal ovens UN
The all-round genius among heating ovens covers a multitude of applications, ideally at temperatures above 50 °C. The fresh air is preheated in the pre-heating chamber to avoid temperature fluctuations.Natural convectionSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
Universal ovens UNplus
The all-round genius among heating ovens covers a multitude of applications, ideally at temperatures above 50 °C. The fresh air is preheated in the pre-heating chamber to avoid temperature fluctuations.Natural convectionTwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Unstirred water bath SUB Aqua Pro Dual
High quality and excellent temperature stability, in a value-for-money package designed to meet the needs of the world`s researchers. The SUB Aqua Pro range is composed of eight models, including shallow and dual baths.Three programmable temperature presetsDrain tap on SUB Aqua Pro 12, 18, 26 and 34Front panel lock-outCountdown timer with audible buzzerDigital PID control for quick heat-up and precision control throughout the temperature rangeUser-settable sample protection and fixed thermal cut-outHigh grade stainless steel tanksNon drip polycarbonate lid and base tray included as standardAccessory polypropylene spheres or a lid must be used at temperatures between 60 °C and 99 °C. Please order PP spheres separately.Dual water bath with 5 and 12 l bath volume:Internal dimensions (W x D x H) 5 l bath: 281 x 131 x 132 mmInternal dimensions (W x D x H) 12 l bath: 306 x 281 x 132 mm