Pear shape flasks with conical ground joints, DURAN®
According to DIN 12383 and in addition to DIN standard, with inscription label.
Pear shape flasks with standard ground joint, borosilicate glass 3.3
With standard ground joint and white inscription.
Pear shape flasks, borosilicate glass 3.3
Conformed to DIN 12383 standards. NS neck is in compliance with DIN 12242 standards.
Pear-shaped flasks with two-necks, DURAN®
In addition to DIN standard 12383, with angled side neck (25°), with conical ground joints, with inscription label.
PF - laboratory-flange triple clamp, 18/10 stainless steel
Holder for all PF- laboratory flasks for the alternating removal of vessel and lid. This special quick-release fastener ensures that the two laboratory flat flanges of reaction tube and flat flange lid are connected and, in addition, that the reaction tube and flat flange lid are held individually (optimal flange angle 45°). Without accessories.
Plastic hose connection, bent, PP
With silicone seal (VMQ)Temperature resistant up to max. 140 °CAutoclavable
Propeller stirrer for Synthesis reactors EasySyn Advanced and Starter, PTFE
PTFE-coated propeller stirrer for use with reactor systems EasySyn.
PTFE sealing rings for jointed glassware
An effective alternative to common PTFE joint sleeves and PTFE stoppers.Air leakage <10-8 to 10-6 mBar l/s (vacuum and pressure)Solvent leakage from containers < 0.1 to 0.03mg/dayTemperature range: -196 to 300°C
Reaction flasks, flat flange, DURAN®, cylindrical
Flanged neck with groove for vacuum use. Capacities indicated are brim-full volumes. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.
Reaction flasks, flat flange, DURAN®, flask shaped
Flanged neck with groove for vacuum use. Capacities indicated are brim-full volumes. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.
Reaction vessels, cylindrical, with thermostatic jacket
With graduationLaboratory flange LFGrooveFlat bottomTwo connectors with threads GL 14 or GL 18Made of DURAN® tubingOther sizes on request.
Reaction vessels, cylindrical, with thermostatic jacket and withdrawal valve
With graduationLaboratory flange LFWith grooveTwo connectors with threads GL 14 or GL 18Made of DURAN® tubingOther sizes on request.
Reaction vessels, spherical, DURAN® tubing
Made of DURAN® tubing. Without graduation, with laboratory flange LF, with groove, other sizes on request.
Reactor lids for Glass reactors, PTFE
Suitable for glass reactors with SCHOTT flat flange DN 60, DN 100 and DN 150. All Reactor Lids dispose of a centric screw-in thread NPT for connection of a stirrer bearing. The lateral necks, that even dispose of NPT screw-in threads, are arranged round the centric connector. The angles of lateral necks are made for an insertion of probes and tubes aside the centre in order to avoid collisions with the stirrer shaft. With screw in threads for connection of transition fittings and a center neck NPT 1/2". Temperature resistance from -200°C to +250°C, universal chemical resistance, FDA conformity, further combinations on request.B 150-02: NPT 1/4" connection directly to the shaft, NPT 1/2" connection aside the shaft, NPT 1/2" connection aside the shaftB 150-04: NPT 1/2" connection aside the shaft, NPT 1/2" connection aside the shaft, NPT 1/2" connection aside the shaftB 150-12: NPT 1/2" connection aside the shaft, NPT 1/2" connection directly to the shaft, NPT 1/2" connection directly to the shaftB 150-14: NPT 1/2" connection directly to the shaft, NPT 1/2" connection aside the shaft, NPT 1/2" connection directly to the shaft, NPT 3/4" connection aside the shaft, NPT 1/4" vertical connectorB 150-16: NPT 1/2" connection directly to the shaft, NPT 1/2" connection aside the shaft, NPT 1/2" connection directly to the shaft, NPT 1/4" connection aside the shaft, NPT 1/4" vertical connectorB 150-22: NPT 1/2" connection directly to the shaft, NPT 1/2" connection aside the shaft, NPT 1/2" connection directly to the shaft, NPT 1/4" connection aside the shaft, NPT 1/4" vertical connectorB 150-24: NPT 1/2" connection directly to the shaft, NPT 1/2" connection aside the shaft, NPT 1/2" connection directly to the shaft, NPT 3/4" connection aside the shaft, NPT 1/4" vertical connectorB 150-26: NPT 1/2" connection directly to the shaft, NPT 1/2" connection aside the shaft, NPT 1" connection directly to the shaft, NPT 1/4" connection aside the shaft, NPT 1/4" vertical connector
Reactor vessels for laboratory reactors LR-5.ST, borosilicate glass 3.3, with bottom discharge valve
Double-walled reactor vessels including stainless steel metal adapter M 16x1 (male) for the connection of temperature hoses or quick connection adapters.Double-walled reactor vessels including stainless steel metal adapter M 16x1 (male) for the connection of temperature hoses or quick connection adapters.
Reactor vessels for laboratory reactors LR-5.ST, borosilicate glass 3.3, without bottom discharge valve
Double-walled reactor vessels including stainless steel metal adapter M 16x1 (male) for the connection of temperature hoses or quick connection adapters.Double-walled reactor vessels including stainless steel metal adapter M 16x1 (male) for the connection of temperature hoses or quick connection adapters.