Screw caps for screwthread tubes, PBT
Red. With DIN thread (GL), temperature resistant up to 180 °C, with PTFE coated silicone sealing (VMQ).
Screw connector caps, PBT
Red. With central hole (diameter outlined below). Temperature resistance to max. 180°C.
Screwthread couplings, PBT
DIN screwthread. For flexible connection of two glass screwthreads. With integral PTFE-faced silicone (VMQ) seals. Temperature resistant to max. 180°C.
Screwthread tubes for glassblowers, DURAN® tubing
Acc. to DIN 12216 and in addition to standard, with DIN thread (GL).
Screwthread tubes with NS cone, DURAN® tubing, cap and sealing
Screw thread adapters , made of DURAN® tubing, with screw-cap with aperture and silicone sealing ring with PTFE washers.
Scrubber Adapter for Bottles, PTFE
Consisting of PTFE body with connecting nut and two lateral GL18 threaded necks, a 300mm long FEP inlet tube and a gas distributor with frit. Easy in- and outlet of gas by means of rigid-walled tubing (e.g. PTFE) which can be connected to the threaded necks using Bola Laboratory Screw Joints. Elastic tubing can be connected by means of hose connectors. Inlet tube can be individually shortened. Special feature: the body of the adapter can be turned independently from the connecting nut. This means, that the completely assembled adaptor can be removed and fixed onto another bottle without the risk of disarranging the tubing. Suitable for bottles with GL45 or GLS80 threads and capacities between 100ml and 5000ml.
Scrubber Bottles Vitrum, borosilicate glass/PTFE
Consisting of PTFE body with screw cap and two lateral GL 18 threaded necks, suitable borosilicate glass bottle as well as a FEP inlet tube and a gas distributor with finest bores. Easy inlet and outlet of gas by means of hard-walled tubing (e. g. PTFE) which can be connected to the threaded necks with BOLA Laboratory Screw Joints. Elastic tubing can be connected by means of hose connectors. The special feature - the body of the distributor can be turned independently from the screw cap, thus the completely assembled distributor can be removed and fixed onto another bottle without the risk of disarranging the tubing. Suitable for Vacuum.
Separating funnel holder, PP
Suitable to hold all types of laboratory funnels and also separatory funnels with diameter from 60 up to 150 mm. Two tapered wedges are provided to ensure firm grip.
Separating funnel holder, PP
For holding conical separating funnels up to 1000ml. Simple assembly by screw-compression grip. Fits support rods with an outside dia. of 8 to 14mm. Cannot be used with funnels below 75 mm diameter.
Separating Funnels acc. to Gilson, borosilicate glass 3.3
With NS-socket and interchangeable PE stopper, stopcock and key with retaining device. Ungraduated.Two types available:With solid glass keyWith PTFE key
Separating funnels acc. to Squibb, borosilicate glass 3.3
With PTFE plug. Available with or without scale to read the approximate volume. With PP-stopper .
Separating funnels acc. to Squibb, with glass plug, borosilicate glass 3.3
With NS socket and PE stopper, with solid glass plug, with screwthread retaining device, available with or without scale (approx. volume / ml), material: borosilicate glass 3.3
Separating funnels cylindrical, with glass plug, borosilicate glass 3.3
Cylindrical shape with straight discharge tube, with NS socket and PE stopper, with solid glass plug, with screwthread retaining device, with scale (approx. volume / ml).* With rubber-ring retainer
Separating funnels Nalgene™ with screw cap, FEP
Transparent. Teflon® FEP, Tefzel® ETFE stopcock and ETFE screw cap. Impact resistant. Non-wetting surfaces ensure no liqiud residue adhesion. Chemically stable. Length of stem under stopcock 65mm. Autoclavable.Teflon® and Tefzel® are registered trademark of DuPont.
Separating funnels Nalgene™, PP
With polypropylene screw cap and TFE stopcock. Transparent. Resistant to chemicals. 65 mm handle length under the tap. Autoclavable except for easily removable stopcock.
Separating funnels, borosilicate glass 3.3, with PE conical stopper
Volume graduations and inscriptions are printed with white enamelThick wall and reinforced rimInterchangeable PTFE stopcockAccording to DIN 12242ISO 4800
Separating funnels, conical, borosilicate glass 3.3
Supplied with PTFE stopcock. With PE conical stopper.ISO 4800NS necks according to DIN 12242 standard
Separating funnels, conical, borosilicate glass 3.3
Conical pattern. With PTFE stopcock and retaining device. Available with or without, scale to read the approximate volume. With PP conical stopper.
Separating funnels, conical, with glass plug, borosilicate glass 3.3
With or without scale. With NS socket and PE stopper, with solid glass plug, with screw thread retaining device, with scale (approx. volume / ml).
Separating funnels, cylindrical, with PTFE key, borosilicate glass 3.3
Cylindrical shape with straight discharge tube, with NS socket and PE stopper, with PTFE plug, with screwthread retaining device, with scale (approx. volume / ml).* With rubber-ring retainer
Separating funnels, Squibb-pattern, borosilicate glass 3.3
Supplied with PTFE stopcock. With PE conical stopper.ISO 4800NS necks according to DIN 12242 standard
Silicone cap wads/septa, VMQ
For GL-screwthread caps. Overall diameter and wad thickness as outlined below. Thermical resistance: 130°C (steam) / 200°C (heat). Autoclavable.