Chemistry vacuum system, MZ 2C NT AK SYNCHRO/EK
This chemistry vacuum system has a wide range of applications like evacuation, evaporation and pumping of gases and vapors. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) enables near 100 percent solvent recovery.Good chemical resistance and vapor toleranceHigh performance even at low vacuumGood vacuum even with gas ballastQuiet and ultra low vibrationOilfreeSimultaneous operation of two independent vacuum applications, with reliable check valves to prevent interference between systems
Chemistry vacuum system, MZ 2C NT AK/EK
This chemistry vacuum system has a wide range of applications like evacuation, evaporation and pumping of gases and vapors. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) enables near 100 percent solvent recovery.Good chemical resistance and vapor toleranceHigh performance even at low vacuumGood vacuum even with gas ballastQuiet and ultra low vibrationOilfreeThis chemistry vacuum system has a wide range of applications like evacuation, evaporation and pumping of gases and vapors. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) enables near 100 percent solvent recovery.Good chemical resistance and vapor toleranceHigh performance even at low vacuumGood vacuum even with gas ballastQuiet and ultra low vibrationOilfree
Chemistry vacuum system, MZ 2C NT AK/EK Peltronic
This chemistry vacuum system has a wide range of applications like evacuation, evaporation and pumping of gases and vapors. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) enables near 100 percent solvent recovery.Good chemical resistance and vapor toleranceHigh performance even at low vacuumGood vacuum even with gas ballastQuiet and ultra low vibrationOilfreeThis chemistry vacuum system has a wide range of applications like evacuation, evaporation and pumping of gases and vapors. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) enables near 100 percent solvent recovery.Good chemical resistance and vapor toleranceHigh performance even at low vacuumGood vacuum even with gas ballastQuiet and ultra low vibrationOilfree
CO2 wire baskets for cold traps with Dewar flask
When using CO2 as a coolant, the CO2 wire basket facilitates the replacement of the cold trap.
Cold trap with Dewar flask type 18 C, stainless steel 1.4301, two-piece, for liquid nitrogen
Stainless steel cold trap with Dewar flask for vacuum applications. Ideal for condensing out moisture or solvents. Dewar flask made of borosilicate glass 3.3 is vacuum-insulated, silver-plated and have a blue-coated metal protective jacket with a support ring into which the cold trap is hung.Cold trap connection: KF NW small vacuum flangeSpring steel clamp to secure the connecting part (KF NW 50)Scope of supply: Cold trap, support ring, Dewar flask type 18 C, spring steel clampThis assembly is designed for use with LN2 as coolant.
Cold trap with Dewar flask type DSS 2000, stainless steel 1.4301, two-piece, for dry ice
Stainless steel cold trap with Dewar flask for vacuum applications. Ideal for condensing out moisture or solvents. Dewar flask made of stainless steel with support ring into which the cold trap is hung.Cold trap connection: KF NW small vacuum flangeSpring steel clamp to secure the connecting part (KF NW 50)CO2 wire basket facilitates replacement of the cold trapScope of supply: Cold trap, support ring, CO2 wire basket, Dewar flask type DSS 2000, spring steel clampThis assembly is designed for use with CO2 as coolant.
Cold trap with Dewar flask type DSS 2000, stainless steel 1.4301, two-piece, for liquid nitrogen
Stainless steel cold trap with Dewar flask for vacuum applications. Ideal for condensing out moisture or solvents. Dewar flask made of stainless steel with support ring into which the cold trap is hung.Cold trap connection: KF NW small vacuum flangeSpring steel clamp to secure the connecting part (KF NW 50)Scope of supply: Cold trap, support ring, Dewar flask type DSS 2000, spring steel clampThis assembly is designed for use with LN2 as coolant.
Cold traps with Dewar flask, borosilicate glass 3.3, one-piece, long version
One-piece cold trap with matching Dewar flask made of borosilicate glass 3.3 for vacuum applications. Ideal for condensing out moisture or solvents. The Dewar flasks are vacuum-insulated, silver-plated and have a blue-coated metal protective jacket with a support ring into which the cold trap is hung.The extended condensate area of the cold traps can hold a larger volume of condensate.Versions of the cold trap connections:S 29 = spherical ground joint S 29O 29 = spherical ground joint S 29 with O-ring sealGL 18 = glass thread GL 18 with PTFE olive Ø 10 mmScope of supply: Cold trap, support ring, Dewar flask type 18 CThe standard assembly is designed for use with LN2 as coolant. When using CO2 and acetone please order CO2 wire basket separately.
Cold traps with Dewar flask, borosilicate glass 3.3, one-piece, long version with KF NW small vaccum flange
One-piece cold trap with matching Dewar flask made of borosilicate glass 3.3 for vacuum applications. Ideal for condensing out moisture or solvents. The Dewar flasks are vacuum-insulated, silver-plated and have a blue-coated metal protective jacket with a support ring into which the cold trap is hung.Extended condensate area of the cold traps can hold a larger volume of condensateKF NW small vacuum flange made of glass for connecting pumping units with small metal vacuum flanges (ISO 2861) to the cold trapsScope of supply: Cold trap, support ring, Dewar flask type 18 CThe standard assembly is designed for use with LN2 as coolant. When using CO2 and acetone please order CO2 wire basket separately.
Cold traps with Dewar flask, borosilicate glass 3.3, one-piece, long version with spout
One-piece cold trap with matching Dewar flask made of borosilicate glass 3.3 for vacuum applications. Ideal for condensing out moisture or solvents. The Dewar flasks are vacuum-insulated, silver-plated and have a blue-coated metal protective jacket with a support ring into which the cold trap is hung.Extended condensate area of the cold traps can hold a larger volume of condensateCold trap with glass thread GL 32 and screw cap as a spoutVersions of the cold trap connections:S 29 = spherical ground joint S 29O 29 = spherical ground joint S 29 with O-ring sealGL 18 = glass thread GL 18 with PTFE olive Ø 10 mmScope of supply: Cold trap, support ring, Dewar flask type 18 CThe standard assembly is designed for use with LN2 as coolant. When using CO2 and acetone please order CO2 wire basket separately.
Cold traps with Dewar flask, borosilicate glass 3.3, one-piece, standard version
One-piece cold trap with matching Dewar flask made of borosilicate glass 3.3 for vacuum applications. Ideal for condensing out moisture or solvents. The Dewar flasks are vacuum-insulated, silver-plated and have a blue-coated metal protective jacket with a support ring into which the cold trap is hung.Versions of the cold trap connections:S 29 = spherical ground joint S 29O 29 = spherical ground joint S 29 with O-ring sealGL 18 = glass thread GL 18 with PTFE olive Ø 10 mmScope of supply: Cold trap, support ring, Dewar flask type 12 CThe standard assembly is designed for use with LN2 as coolant. When using CO2 and acetone please order CO2 wire basket separately.
Cold traps with Dewar flask, borosilicate glass 3.3, one-piece, standard version with KF NW small vacuum flange
One-piece cold trap with matching Dewar flask made of borosilicate glass 3.3 for vacuum applications. Ideal for condensing out moisture or solvents. The Dewar flasks are vacuum-insulated, silver-plated and have a blue-coated metal protective jacket with a support ring into which the cold trap is hung.With the KF NW small vacuum flange made of glass, pumping units with small metal vacuum flanges (ISO 2861) can be connected to the cold traps.Scope of supply: Cold trap, support ring, Dewar flask type 12 CThe standard assembly is designed for use with LN2 as coolant. When using CO2 and acetone please order CO2 wire basket separately.
Cold traps with Dewar flask, borosilicate glass 3.3, one-piece, standard version with spout
One-piece cold trap with matching Dewar flask made of borosilicate glass 3.3 for vacuum applications. Ideal for condensing out moisture or solvents. The Dewar flasks are vacuum-insulated, silver-plated and have a blue-coated metal protective jacket with a support ring into which the cold trap is hung.Cold traps have an additional glass thread GL 32 with screw cap as a spout.Versions of the cold trap connections:S 29 = spherical ground joint S 29O 29 = spherical ground joint S 29 with O-ring sealGL 18 = glass thread GL 18 with PTFE olive Ø 10 mmScope of supply: Cold trap, support ring, Dewar flask type 12 CThe standard assembly is designed for use with LN2 as coolant. When using CO2 and acetone please order CO2 wire basket separately.
Cold traps with Dewar flask, borosilicate glass 3.3, two-piece, long version
Two-piece cold trap with matching Dewar flask made of borosilicate glass 3.3 for vacuum applications. The condensate area can be separated from the upper part of the cold trap. The Dewar flasks are vacuum-insulated, silver-plated and have a blue-coated metal protective jacket with a support ring into which the cold trap is hung. Including spring steel clamp to secure the connecting part (NS 45/40 conical ground joint).The extended condensate area of the cold traps can hold a larger volume of condensate.Versions of the cold trap connections:S 29 = spherical ground joint S 29GL 18 = glass thread GL 18 with PTFE olive Ø 10 mmScope of supply: Cold trap, support ring, Dewar flask type 18 C, spring steel clampThe standard assembly is designed for use with LN2 as coolant. When using CO2 and acetone please order CO2 wire basket separately.
Cold traps with Dewar flask, borosilicate glass 3.3, two-piece, standard version
Two-piece cold trap with matching Dewar flask made of borosilicate glass 3.3 for vacuum applications. The condensate area can be separated from the upper part of the cold trap. The Dewar flasks are vacuum-insulated, silver-plated and have a blue-coated metal protective jacket with a support ring into which the cold trap is hung. Including spring steel clamp to secure the connecting part (NS 45/40 conical ground joint).Versions of the cold trap connections:O 29 = spherical ground joint S 29 with O-ring sealGL 18 = glass thread GL 18 with PTFE olive Ø 10 mmScope of supply: Cold trap, support ring, Dewar flask type 12 C, spring steel clampThe standard assembly is designed for use with LN2 as coolant. When using CO2 and acetone please order CO2 wire basket separately.
Cold traps, borosilicate 3.3, one-piece
Borosilicate 3.3 glass, one-piece, with GL 45 neck and cap closure, GL 14 threaded side connections with caps and plastic tubing adapters.
Cold traps, DURAN® tubing, with condensate drain
Cold trap for direct filling of cooling agents, low cooling agent consumption due to double-walled design, apparatus connection: socket NS 29/32, vacuum pump connection: cone NS 29/32, made of DURAN® tubing.
Cold traps, DURAN® tubing, without condensate drain
Cold trap for direct filling of cooling agents, low cooling agent consumption due to double-walled design, apparatus connection: socket NS 29/32, vacuum pump connection: cone NS 29/32, made of DURAN® tubing.
Compact Vacuum Controller VACUU·SELECT®, benchtop version
Fully equipped two-point vacuum controller with capacitive, gas type-independent absolute pressure measurement using an alumina-ceramic diaphragm. Ready to use due to standard laboratory connections.Scope of supply: Vacuum controller VACUU·SELECT® with chemistry suction line valve, check valve, integrated ceramic vacuum sensor, venting valve and power supply.Fully equipped two-point vacuum controller with capacitive, gas type-independent absolute pressure measurement using an alumina-ceramic diaphragm. Ready to use due to standard laboratory connections.Scope of supply: Vacuum controller VACUU·SELECT® with chemistry suction line valve, check valve, integrated ceramic vacuum sensor, venting valve and power supply.
Compact Vacuum Controller VACUU·SELECT®, stand version
Fully equipped two-point vacuum controller with capacitive, gas type-independent absolute pressure measurement using an alumina-ceramic diaphragm. Ready to use due to standard laboratory connections.Scope of supply: Vacuum controller VACUU·SELECT® with chemistry suction line valve, check valve, integrated ceramic vacuum sensor, venting valve and power supply.Fully equipped two-point vacuum controller with capacitive, gas type-independent absolute pressure measurement using an alumina-ceramic diaphragm. Ready to use due to standard laboratory connections.Scope of supply: Vacuum controller VACUU·SELECT® with chemistry suction line valve, check valve, integrated ceramic vacuum sensor, venting valve and power supply.
Condensation traps, borosilicate 3.3, two-piece
Borosilicate 3.3 glass, comprising bottle with ground glass cone neck fitting a separate inlet / outlet head with choice of tubing or ground joint connections.
Connection elements for local vacuum network VACUU LAN®
The VACUU LAN® local vacuum network allows multiple work stations to be connected to a single vacuum pump. This is useful for almost any conventional vacuum application in a chemical laboratory VACUU LAN® can be directly incorporated into new laboratory installations or retro-fitted. All assemblies have integral check (1-way) valves. A practical and economical solution for multiple vacuum users in a single laboratory.Detailed brochures are available on request!The VACUU LAN® local vacuum network allows multiple work stations to be connected to a single vacuum pump. This is useful for almost any conventional vacuum application in a chemical laboratory VACUU LAN® can be directly incorporated into new laboratory installations or retro-fitted. All assemblies have integral check (1-way) valves. A practical and economical solution for multiple vacuum users in a single laboratory.Detailed brochures are available on request!
Conversion kits for diaphragm vacuum pumps LABOPORT® N 820 G/N 840 G
With the customised LABOPORT® conversion kits, users can expand the LABOPORT® basic pumps N 820 G and N 840 G directly on site to the SR system with separator, to the SH system with separator and high-performance condenser or to the SC system with separator, high-performance condenser and innovative vacuum controller.Modular expandability of the basic pump through intelligent conversion kitsFlexible adaptation and simple conversion by laboratory personnelNo waiting and downtimes thanks to direct conversion on siteMaximum user-friendliness, intuitive operation and easy cleaningMore sustainable work thanks to environmentally friendly overall systemScope of supply: Conversion kit without pump
Desiccant cartridges
For moisture reduction in desiccators and precision laboratory instruments. The transparent polypropylene dish allows visual inspection of silica gel, which changes in colour from blue to pale pink as it absorbs moisture. The desiccant can be easily regenerated by heating cartridges in an oven at 50°C overnight or at 100°C for 6 hours. For faster regeneration, remove the membrane lid, heat the spent gel crystals in a suitable glass or porcelain dish at 150°C in the oven for one hour.Inert, non-corrosive, non-toxic silica gelIndividually foil sealed