Pump drive Hei-FLOW Ultimate 120
Dosing and Feeding pumps for reproducible results. Flow characteristics in combination with various tubing diameters are pre-programmed for accurate flow rate numbers. With freely selectable process parameters.Speed, direction of rotation and on / off function is controllable with an analog interface or digital with built-in RS232 interfacePre-programmed flow characteristics are shown in the displayDigital read-out of Speed, Tubing diameter, Flow rate, Dosing volume, Interval dosing, Pause functionWith buttons for selecting all process parametersEasy calibration of flow volume and flow rateSmooth start operation prevents from spills and splashing mediaA press of the max button accelerates the filling and draining of the tubingFor safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheatingOptional foot switch to operate pump drive in closed fume hoods and to facilitate filling operationsPump heads with convex rollers for cell protection are available for use in cell biologyThe pump head is not included. Please order separately.With an optional pump head adapter the Hei-FLOW Ultimate 120 can be upgraded for multi-channel operation.
Pump drive Hei-FLOW Ultimate 120 Multi
Dosing and Feeding pumps for reproducible results. Flow characteristics in combination with various tubing diameters are pre-programmed for accurate flow rate numbers. With freely selectable process parameters.Speed, direction of rotation and on / off function is controllable with an analog interface or digital with built-in RS232 interfacePre-programmed flow characteristics are shown in the displayDigital read-out of Speed, Tubing diameter, Flow rate, Dosing volume, Interval dosing, Pause functionWith buttons for selecting all process parametersEasy calibration of flow volume and flow rateSmooth start operation prevents from spills and splashing mediaA press of the max button accelerates the filling and draining of the tubingFor safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheatingOptional foot switch to operate pump drive in closed fume hoods and to facilitate filling operationsPump heads with convex rollers for cell protection are available for use in cell biologyThe pump head is not included. Please order separately.Scope of supply: Pump drive, adapter for multi-channel pump heads
Pump drive Hei-FLOW Ultimate 600
Dosing and Feeding pumps for reproducible results. Flow characteristics in combination with various tubing diameters are pre-programmed for accurate flow rate numbers. With freely selectable process parameters.Speed, direction of rotation and on / off function is controllable with an analog interface or digital with built-in RS232 interfacePre-programmed flow characteristics are shown in the displayDigital read-out of Speed, Tubing diameter, Flow rate, Dosing volume, Interval dosing, Pause functionWith buttons for selecting all process parametersEasy calibration of flow volume and flow rateSmooth start operation prevents from spills and splashing mediaA press of the max button accelerates the filling and draining of the tubingFor safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheatingOptional foot switch to operate pump drive in closed fume hoods and to facilitate filling operationsPump heads with convex rollers for cell protection are available for use in cell biologyThe pump head is not included. Please order separately.This pump drive is only suitable for use with single-channel pump heads.
Pump heads rotarus® MKF 4/8/12
For use with all rotarus® peristaltic pumps. For stopper tubes.With components made of anodized aluminum and stainless steel. For tubing cassettes, with lateral set screw for the adjustment of the flow rate. With RFID-technology for detection and monitoring of pump head and tubing.
Pump heads rotarus® MKF 60
For use with all rotarus® peristaltic pumps. For stopper tubes.With components made of durable PPS plastics. Simple and easy loading of the tubing. For attaching the pump heads to the rotarus® drives a MKF 60 adapter set is required. Please order separately.
Pump heads rotarus® MKF 60-16
For use with all rotarus® peristaltic pumps.With components made of durable PPS plastics. Simple and easy loading of the tubing. For attaching the pump heads to the rotarus® drives a MKF 60 adapter set is required. Please order separately.
Pump heads rotarus® PK
For use with all rotarus® peristaltic pumps.With double-pivoted rollers made of high-grade, medical stainless steel. With RFID-technology for detection and monitoring of pump head and tubing.
Pump heads rotarus® PKF 60
For use with all rotarus® peristaltic pumps. For stopper tubes.With components made of durable PPS plastics. Simple and easy loading of the tubing. For attaching the pump heads to the rotarus® drives a PKF 60 adapter set is required. Please order separately.
Pumps, peristaltic, Reglo-Digital
For high precision pumping in the ml-range and below (0.0 01 to 38 ml/min). Simple Click'n'go mini tubing assembly cartridges.Microprocessor controlled, with RS232 interface and can be calibrated. Programmable flow rates, dispensing volume and pause times. Digital LED display. For: 0.13 to 3.17mm i.d. tubing.Programmable functions:ml/minthe drive speed (rpm)drip-free by rolling back stepscalibration: ml/min (flow rate); ml (volume)power ON/OFFDosing by:volume mlvolume/unit timemetering (0.1 sec to 999 hours)interval metering with preset pauseselectable number of dispensing
Sensors behrotest® for canisters with screw-on closures
Sensors for monitoring the maximum fill heightSensors for monitoring the maximum fill height are used to protect against damage from overflowing vessels.A float assembly encloses a reed contact which activates an acoustic alarm when the maximum fill height is reached, enabling the user to stop further filling in time to prevent overflow.Sensors for monitoring the minimum fill heightSensors for monitoring the minimum fill height are used to protect against interruption in supply or inadequate volume available in processes requiring continuous withdrawal of a liquid from a container.They give an acoustic warning when the content of the container runs low. The sensors are available in various lengths to permit use in containers of different heights. When the liquid level in the container sinks below the set point, a float drops, opening a reed contact. An alarm warning then informs the user of the imminent risk of an empty reservoir.
Single-channel Pump Heads SP quick for Pump drives Hei-FLOW
Fast and convenient tube changesLow pulsation due to 5 roller systemPump head features ball bearingsRollers made of stainless steelFor tubes with a 1.6mm or 2.5mm wall thickness (wt)Depending on drive and tubing, the flow rate ranges from 0.38 to 3436 ml per minute
Single-channel Pump Heads SP standard for Pump drives Hei-FLOW
Recommended for standard applicationsConvex rollers do not squeeze or crush organic cell culturesPump head features ball bearingsRollers made of stainless steel and polyamideFor tubes with a 1.6mm or 2.5mm wall thickness (wt)Depending on drive and tubing, the flow rate ranges from 2.0 to 4151 ml per minute
Single-channel Pump Heads SP vario for Pump drives Hei-FLOW
Suitable for most Heidolph tubing due to adjustable roller spacingConvex rollers do not squeeze or crush organic cell culturesPump head features ball bearingsRollers made of stainless steel and aluminumDepending on drive and tubing, the flow rate ranges from 2.0 to 4151 ml per minute
Siphons, LDPE/PVC
Transparent with stopcock. Simple to use, suitable for occasional dispensing of non-aggressive liquids from a higher drum to a lower vessel, following the siphoning principle.
Solvent pump foot operated, with flexible tubing
For filling off high purity liquids such as solvents. Due to the barrel screw joint and the stopcock, the container and the pump can be hermetically sealed. Electrostatic charge can be dissipated through the accessory antistatic set (please order seperately).Medium-contacting parts made of stainless steel (1.4301) and PTFEFor barrels up to 220 litres, immersion tube can be steplessly adjusted to the barrel depthSuitable for steel barrels with R 2'' thread
Solvent pump foot operated, with rigid angled tube
For filling off high purity liquids such as solvents. Due to the barrel screw joint and the stopcock, the container and the pump can be hermetically sealed. Electrostatic charge can be dissipated through the accessory antistatic set (please order seperately).Medium-contacting parts made opf stainless steel (1.4301) and PTFEFor barrels up to 220 litres, immersion tube can be steplessly adjusted to the barrel depthSuitable for steel barrels with R 2'' thread
Solvent pump hand operated
For contamination-free removal of organic solvents and flavouring agents. Can be completely closed off with two ball valves so that no dangerous vapours can escape after dispensing. Electrostatic charge can be dissipated through the accessory antistatic set (please order separately).Medium-contacting parts are made of stainless steel (1.4301) and PTFEFor containers up to 60 litresSuitable for containers with R 2'' thread
Solvent pump hand operated, for tinplate canisters
For contamination-free removal of organic solvents and flavouring agents. Can be completely closed off with two ball valves so that no dangerous vapours can escape after dispensing. Electrostatic charge can be dissipated through the accessory antistatic set (please order separately).Medium-contacting parts are made of stainless steel (1.4301) and PTFEFor containers up to 60 litresIncl. connector thread for pull-out spouts with Ø 35 mm
Thread adapter set
Thread adapter set consisting of:3/4'' Hünersdorff3/4" Kautex3/4" cylindrical R 3/4" barrel thread3/4" conical R 3/4" barrel threadHex wrench for threaded adapter