Foot pumps OTAL®, PVDF
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PVDFUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor acids, alkalis and chlorine bleaching, not for heavily oxidising acids and alkalis
Foot pumps OTAL®, stainless steel
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of stainless steelUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor liquids that are not easily flammable in Hazard Category AIII (VbF)
Gas-tight Barrel pump
With flexible discharge tubing for drawing off into larger canisters and containers. Convenient liquid transfer as the canister can be left standing on the floor. The connection cone is pressed against the canister manually.The pump is fitted with a gas-displacement device for odour-free, liquid transfer. The pump can be hermetically sealed with 2 ball valves.Parts in contact with media: Stainless steel AISI 304 (1.4301), PTFEWith gas-tight barrel screw joint, 2" fine threadNot suitable for acetone!
Gas-tight barrel pump, PP
The gas-tight barrel pump reduces the escape of dangerous, health-endangering or malodorous gases when filling liquids. The resulting vapours are returned directly to the original container via the gas pendulum line.Medium-contacting parts, PP, PE and PVC (hose)Steplessly extendable telescopic tube for barrel depths of 40 - 67 cmUniversal adapter for container openings of 34 - 70 mm
Gear pump drives, Reglo Digital with MasterflexLive
Pulsefree dispensing pumps with excellent repeatability!Flow rates 1.7 to 4680 ml/min (depending on mounted pump-head)5''-touch screenOperating modes:Pumping by drive speed (rpm)Pumping by flow rate (ml/min)Dispensing by volume (ml)Dispensing by time (0.1 s up to 999 hrs)Dispensing by volume within a pre-set timeInterval dispensing by volume with a pauseInterval dispensing by time with a pauseSetting the number of dispensing cyclesPause time setting (from 0.1 s up to 999 hrs)Back-steps for drip-free dispensingReversible rotation direction (only for Cavity Style pumpheads)Calibrating functions:For flow rate (ml/min)For dispensing volume (ml)
Hand pumps OTAL®, battery-pumps
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeWith delivery tubes made of PP/PVCFor safe filling of car batteries with acid or distilled waterWith tube shutoff valveWith dosing tip for precise filling
Hand pumps OTAL®, PP
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PPUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor weak acids, alkalis and detergents
Hand pumps OTAL®, PP
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PPFor small containers, up to 10 lUniversal bungs made of soft PVC, for container openings of 20 – 36 mmFor weak acids, alkalis and detergents
Hand pumps OTAL®, PP, with tube and stopcock
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PPUniversal bungs made of soft PVC, for container openings of 30 – 70 mm1.5 m discharge tube, PVCStopcock made of PP/PE
Hand pumps OTAL®, PVDF
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PVDFUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor acids, alkalis and chlorine bleaching, not for heavily oxidising acids and alkalis
Hand pumps OTAL®, stainless steel
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of stainless steelUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor liquids that are not easily flammable in Hazard Category AIII (VbF)
Laboratory peristaltic pumps, PLP
The behrotest peristaltic pumps PLP are suitable for the transport of watery solutions / non aggressive applications.They find their application in the laboratory, the food industry as well as in the analytical, medicinal or biological field.The RPM (rotation per minute) can be adjusted manually and the flow direction can be amended.These PLP pumps have angle connectors to which tubing can be attached either with or without additional brackets, depending on the tube size.
Laboratory peristaltic pumps, PLP
The behrotest peristaltic pumps PLP are suitable for the transport of watery solutions / non aggressive applications.They find their application in the laboratory, the food industry as well as in the analytical, medicinal or biological field.The RPM (rotation per minute) can be adjusted manually and the flow direction can be amended.These PLP pumps have angle connectors to which tubing can be attached either with or without additional brackets, depending on the tube size.
Hand lever pump, alu
Lever pump for petrochemical substances, made of stable aluminium cast, valves and pistons are made of plastic (PA).Suitable for barrel threads M 64x4 or R 2"With closure device (for padlock)Telescopic tube 470 ... 925 mmScope of supply: Lever pump, hose kit, hose length 1.5 m, electrically conductive, with outlet elbow and bend protection spring
Magnetic drive pump, 15 W
These new magnetic drive pumps are designed for pumping acids, bases, mixtures of acids and bases, solvents, photochemicals into alkali stripping baths, galvanic baths, as well as radioactive, sterile, expensive or highly corrosive liquids. The pumps are sealless. The impeller is driven by the magnetic force of the outer magnets, therefore no mechanical seal is required. As the pump housing is hermetically sealed no leaks can occur. The use of high performance, permanent magnets, ensures high transmission forces even at elevated temperatures.viscosity up to 20 mPaspump complete with flanged-to motorMotor 230 V, material PP (fibre-glass reinforced), stainless steel (shaft), Viton® (O-ring), tubing connection 14 mm
Magnetic drive pump, 29 W
These new magnetic drive pumps are designed for pumping acids, bases, mixtures of acids and bases, solvents, photochemicals into alkali stripping baths, galvanic baths, as well as radioactive, sterile, expensive or highly corrosive liquids. The pumps are sealless. The impeller is driven by the magnetic force of the outer magnets, therefore no mechanical seal is required. As the pump housing is hermetically sealed no leaks can occur. The use of high performance, permanent magnets, ensures high transmission forces even at elevated temperatures.viscosity up to 20 mPaspump complete with flanged-to motorMotor 230V, material PP (fibre-glass reinforced), ceramics (shaft), Rulon (guide bearing), Viton® (O-ring), suction/discharge G ¾" OT (BSP)
Mini solvent pump
The self-closing discharge (with auto-stop function) of the Mini solvent pump ensures absolutely precise filling with no dripping at all. Dosing is even easy in very small containers such as test tubes, which present no problems. A hose can optionally be fastened onto the discharge spout (internal Ø 6 mm), thus making it possible to fill the container from a greater distance.The Mini solvent pump is especially compact and very well balanced, which makes it possible to fill without tipping, even from very small containers.Thanks to its sturdy design and high-quality materials, the Mini solvent pump consistently ensures neat and reliable filling throughout its long service life, easily and conveniently.Ideal for 1-5 l containersConnecting thread GL 45Parts in contact with medium made of PTFE and stainless steel (1.4301, 1.4404)PTFE hose (6 x 8 mm) 0.4 mIncluding grounding cable 2 mAdapters available as accessories for S 40, GL 38 and GL 32
Multi-channel pump head C 12, without cassettes
These pump drives are able to be configured for multi-channel use: Value 01, Advantage 01, Precision 01Increased output by running up to 12 individual cassettes on one single pump drive and pump head systemSeparate metering into multiple vessels with different feed rates at the same time by using different tubing dimensions to adjust flow ratesEasy and quick tubing changeIn addition to standard pump heads which feature a 4 roller system, 8 roller pump heads are available for low pulsationEasy change of cassettes, even during operationCassettes adjustments and changes are simple due to click systemWith possibility to upgrade the pump drive with an adapter for multi-channel operationAccepts 12 cassettes smallBuilt-in reduction gear allows feeding of smallest quantities8 rollers minimizing pulsation
Multi-channel pump head C 4, without cassettes
These pump drives are able to be configured for multi-channel use: Value 01, Advantage 01, Precision 01Increased output by running up to 12 individual cassettes on one single pump drive and pump head systemSeparate metering into multiple vessels with different feed rates at the same time by using different tubing dimensions to adjust flow ratesEasy and quick tubing changeIn addition to standard pump heads which feature a 4 roller system, 8 roller pump heads are available for low pulsationEasy change of cassettes, even during operationCassettes adjustments and changes are simple due to click systemWith possibility to upgrade the pump drive with an adapter for multi-channel operationAccepts 4 cassettes small8 rollers for low pulsation
Multi-channel pump head C 8, without cassettes
These pump drives are able to be configured for multi-channel use: Value 01, Advantage 01, Precision 01Increased output by running up to 12 individual cassettes on one single pump drive and pump head systemSeparate metering into multiple vessels with different feed rates at the same time by using different tubing dimensions to adjust flow ratesEasy and quick tubing changeIn addition to standard pump heads which feature a 4 roller system, 8 roller pump heads are available for low pulsationEasy change of cassettes, even during operationCassettes adjustments and changes are simple due to click systemWith possibility to upgrade the pump drive with an adapter for multi-channel operationAccepts 8 cassettes medium or 4 cassettes large4-roller design
Nominal tubing for pumps, Tygon® LMT-55 without collars
Transparent. Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Long working lifespan. Good resistance to acids and alkalis. Food-safe.
Peristaltic Multichannel Pump PLP 381
Flow rates from 0.0002 to 380 ml/min. The speed can be adjusted manually or automatically through optional external control. Easy to operate.Accepts various pump heads (please order separately)Prime key for fast filling and emptyingAdjust speed manually or automatically through optional external controlMemory function, storing the running parameters automaticallyMembrane keypad, easy to operateGood performance and low price