Bottle InVitro™ Biotainer™ Nalgene™, Type 3750, 3751, HDPE, sterile
Leakproof bottle with PP screw cap, suitable for freezing and storing biological reagents from -100 °C to 99 °C. 38 mm closure is silicone lined. 3.9 L overflow volume. Black printed graduations in ml to 3000 ml. Space saving square shape and convenient handle. Meets current USP 87, 88. Pyrogen-free.* with heat shrink tape sealed.
Bottle top filter, PS, sterile, PES membrane
For sterile filtration of culture media, buffers and reagents.With graduationInclined hose connectorSterilized by irradiation, SAL 10-6DNase/RNase-free, pyrogen freeGL45
Bottle Top Filters Nalgene™ Rapid-Flow™, PES Membrane, sterile
Filters securely screw onto glass media bottles with 33 mm or 45 mm neck sizes. Allows direct filtration of liquid into sterile glass media bottles.Tight and secure thread connection for vacuum filtration, vacuum tubing to be connected onto tubing adapter of side-arm. Graduated. Certificate of quality included in each full case. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units for easy identification and lot traceability.
Bottle Top Filters Nalgene™ Rapid-Flow™, SFCA Membrane, sterile
Tissue culture filters for screw fitting onto bottles with 33mm or 45mm neck diameters. With surfactant-free, cellulose acetate membrane (SFCA) and polystyrene (PS) housing. Gamma-irradiated sterile. Pyrogen-free. Non cytotoxic. Low-pressure filtration can be carried out directly into a suitable sterile bottle. Caution: Only use sterile bottles authorised for use in low pressure applications. Always wear protective equipment for low pressure procedures. The membrane is characterised by its low protein binding, good throughput rates and minimal clogging with negligible protein loss. Permanent, moulded graduations. Quick-disconnection tubing adaptor with cellulosic vent plug for tubing with an internal diameter of 6mm to 9mm. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units for easy identification and lot traceability.
Bottle Top Filters Nalgene™, PSU, without membrane
Non-toxic. Robust body. Suitable for pressure filtration up to 600 mbar and vacuum filtration. With seal, cap and tubing adapter. Autoclavable.
Bottle-top filters, Sartolab® BT, PES membrane
Sterile vacuum filters for screwing directly onto sterile bottles. Disposable units for sterile filtration of media and aqueous solutions. The special polyethersulphone (PES) membrane produces extremely good throughput times and low protein binding, making it ideal for cell culture applications. With GL45 screw connection for all standard bottles.Caution: Only use sterile bottles authorised for use in low pressure applications.
Bottles, glass, culture medium for metal caps, DURAN®
Rimless. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.
Bottles, glass, culture medium, DURAN®
Rimless. For glass caps. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.
Bottles, glass, culture, flat, octagonal
Clear glass. DIN version. Autoclavable.
BRANDplates® Insert System, cellGrade™ plus, smooth walled
Sterile. For manual and automated cell and tissue culture work.For standard applications like secretion studies, co-cultivations, chemotaxis tests, etc.Hydrophilic cell culture surfaceStrips of 4 inserts, divisibleHanging inserts – distance between the well base and insert membrane is 4 mmBIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxic
BRANDplates® Insert System, cellGrade™ plus, with inlet channels
Sterile. For manual and automated cell and tissue culture work.Inserts with special inlet channels (Inlet Opening System) are used for the automated in vitro preparation of human tissues. The Inlet Opening System enables rapid, consistent changing of media.Hydrophilic cell culture surfaceStrips of 4 inserts, divisibleHanging inserts – distance between the well base and insert membrane is 4 mmBIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxic
BRANDplates® Single Inserts, cellGrade™ plus, smooth walled
Sterile. For manual and automated cell and tissue culture work.Single insertsBIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxic
BRANDplates®, for inserts, cellGrade™ plus, PS
Sterile. For manual and automated cell and tissue culture work.Hydrophilic with different chemical groups, such as carboxyl and hydroxyl groups, that are freely accessibleCover with condensation ringsSide well access for easier pipetting and removing cover slipsPerfect positioning in the plates via guide ridgesManufactured according to the requirements in ANSI/SLAS Standards 1 and 4BIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxic
BRANDplates®, for Inserts, pureGrade™ S, PS
Sterile. For manual and automated cell and tissue culture work.Non-treated surfaceCover with condensation ringsSide well access for easier pipetting and removing cover slipsPerfect positioning in the plates via guide ridgesManufactured according to the requirements in ANSI/SLAS Standards 1 and 4BIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxic
Bunsen burner, portable Labogaz® 206
For operation with gas cartridge C 206 GLS (Cat.-No.: 9.018 520). DVGW-authorised.
Bunsen burner, portable, Labogaz® 470
For operation with gas cartridges CV 300 Plus (Cat.-No.: 6.243 905) or CV 470 Plus (Cat.-No.: 9.018 512).
C96 MicroWell™ Plates, PS, with MaxiSorp™ surface
C-shaped bottom for optimal washing and liquid retrievalFluoroNunc™ for fluorescence based immuno assays with minimal auto-fluorescenceMaxiSorp™ for quantitative and qualitative solid phase immuno assays
C96 MicroWell™ Plates, PS, with MaxiSorp™ surface, certified
C-shaped bottom for optimal washing and liquid retrievalFluoroNunc™ for fluorescence based immuno assays with minimal auto-fluorescenceMaxiSorp™ for quantitative and qualitative solid phase immuno assays
C96 MicroWell™ Plates, PS, with PolySorp™ surface
C-shaped bottom for optimal washing and liquid retrievalFluoroNunc™ for fluorescence based immuno assays with minimal auto-fluorescencePolySorp™ for quantitative and qualitative solid phase immuno assaysCertified
Cap strips, PP
For sealing 8 well PCR tube strips or 96-well PCR plates. Large end tab facilitates the removal of the cap strip.LabeledHighly transparent flat caps are suitable for qPCRFree of DNase, RNase, human DNA, endotoxin and pyrogen
Cap strips, PP, strips of 8
For PCR plates. BIO-CERT® PCR QUALITY: Free of human DNA, RNase, DNase, pyrogens and PCR-Inhibitors.
