Cell culture flasks TripleFlask Nunclon™ Surface, PS/HDPE, sterile
Cell culture flasks with three parallel growth surfaces provide a total culture area of 500 cm² - with external dimensions of a 175 cm² standard flask. Ideal for scale-up. Available with Screw caps (Vent/Close caps) or filter caps for good gas exchange. Certified pyrogen-free and tested for both monolayer formation and cloning efficiency employing primary cells as well as repeating cell lines. SterileMaterial flasks: PolystyreneMaterial caps: HDPE
Cell Culture Flasks TripleFlask™, non-treated, PS/HDPE, pyrogen-free
Non-treated, sterile flasks for suspension cell cultures. White caps for easy identification. Pyrogen-free.Material flasks: PolystyreneMaterial caps: HDPE
Cell Culture Flasks, Falcon®, sterile
Falcon® Cell Culture Flasks feature a unique vacuum-gas plasma tissue culture treatment. These products are certified as sterile, non-cytotoxic, and pyrogen-free. Other surface media available on request.
Cell Culture Flasks, Nunclon™ Sphera™
Optimizing spheroid formationAllows cells to grow in suspension with virtually no cell attachmentSupports many different cell types and their ability to generate spheroidsEnables consistent, repeatable cell growthGrowing 3D cancer culturesMinimizes variability and supports the consistent formation of cancer spheroids that simulate the 3D structures of tumor growth, providing a better model system for studying tumor cell progression and efficacy of anticancer agents in vitroPromoting formation of embryoid bodies (EB)Demonstrates superior quality for embryoid body formation of pluripotent stem cells with minimal spontaneous differentiationResultant cells are able to differentiate into all three germ layersCertifications/ComplianceFree of animal productsPyrogen-free: Endotoxin tested (0.5 EU/mL)Biologically inert: USP biological reactivity class VIHigh level of sterility: SAL 10-6, ethylene oxide gas sterilization
Cell Culture Flasks, Nunclon™Δ Surface, PS/HDPE, sterile
Nunclon™Δ cell culture flasks with surface areas from 25 to 175cm² are available with filter caps or Screw caps (Vent/Close caps) for good gas exchange. Short, wide neck allows easy access to entire growth surface. The Nunclon™Δ treatment is limited to the intended growth area. Neck areas are not treated to prevent cell attachment and growth in undesired areas. Certified pyrogen-free and tested for both monolayer formation and cloning efficiency employing primary cells as well as repeating cell lines. Sterile.Material flasks: PolystyreneMaterial caps: HDPE
Cell culture flasks, treated, PS, sterile
These cell culture flasks with treated surfaces for the cultivation of adherent cells are available with different growth areas from 12.5 to 300 cm². Available with vented or plug-seal caps made from polyethylene. Vented caps contain a 0.22 µm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination. Plug-seal caps can be used in closed systems, providing a liquid and gas sheer seal, but by simply unscrewing the cap one quarter of a turn, this cap can also be used in an open system.Innovative angled neck design offers good pipette and cell scraper accessUpper triangular and wider base shape provides stabilityStackableSpecial writing area near the neckEngraved graduation on both flask sidesSterilized by gamma irradiationPyrogen-freeIndividually packed in resealable outer packaging with zip fastener
Cell culture flasks, treated, PS, sterile, U-shape
These cell culture flasks with treated surfaces for the cultivation of adherent cells are available with vented or plug-seal caps made from polyethylene. Vented caps contain a 0.22 µm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination. Plug-seal caps can be used in closed systems, providing a liquid and gas sheer seal, but by simply unscrewing the cap one quarter of a turn, this cap can also be used in an open system.StackableSpecial writing area near the neckEngraved graduation on both flask sidesSterilized by gamma irradiationPyrogen-free
Cell culture inserts 2in1, for 12-well-plates
The BRAND Insert 2in1 is a cell culture insert used for skin model production, 3D epithelium cultures, chemotaxis analyses, transmigration assays, transport and polarity studies.cellGrade™ plus surfacesTo be used as a hanging or standing insertSterility Assurance Level (SAL) of 10-6Suitable for 2D and 3D cell culturesBIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxicThe BRAND Insert 2in1 is a cell culture insert used for skin model production, 3D epithelium cultures, chemotaxis analyses, transmigration assays, transport and polarity studies.cellGrade™ plus surfacesTo be used as a hanging or standing insertSterility Assurance Level (SAL) of 10-6Suitable for 2D and 3D cell culturesBIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxic
Cell culture inserts 2in1, for 24-well-plates
The BRAND Insert 2in1 is a cell culture insert used for skin model production, 3D epithelium cultures, chemotaxis analyses, transmigration assays, transport and polarity studies.cellGrade™ plus surfacesTo be used as a hanging or standing insertSterility Assurance Level (SAL) of 10-6Suitable for 2D and 3D cell culturesBIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxicThe BRAND Insert 2in1 is a cell culture insert used for skin model production, 3D epithelium cultures, chemotaxis analyses, transmigration assays, transport and polarity studies.cellGrade™ plus surfacesTo be used as a hanging or standing insertSterility Assurance Level (SAL) of 10-6Suitable for 2D and 3D cell culturesBIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxic
Cell culture inserts 2in1, for 6-well-plates
The BRAND Insert 2in1 is a cell culture insert used for skin model production, 3D epithelium cultures, chemotaxis analyses, transmigration assays, transport and polarity studies.cellGrade™ plus surfacesTo be used as a hanging or standing insertSterility Assurance Level (SAL) of 10-6Suitable for 2D and 3D cell culturesBIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxicThe BRAND Insert 2in1 is a cell culture insert used for skin model production, 3D epithelium cultures, chemotaxis analyses, transmigration assays, transport and polarity studies.cellGrade™ plus surfacesTo be used as a hanging or standing insertSterility Assurance Level (SAL) of 10-6Suitable for 2D and 3D cell culturesBIO-CERT® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxic
Cell Culture Inserts and Carrier Plates, PC, sterile
Inserts are treated and tested for good cell attachment. Available in different formats for 6, 12 or 24 well multidishes and in different pore sizes: 0.4, 3 or 8 µm. Easy cultivation of most cell types without matrix coating possible. Used in a variety of applications, including transport studies, toxicity tests, chemotaxis studies and electron microscopy. Packed in sterile Nunclon™Δ treated multidishes and resealable bags.Non-toxic. Pyrogen-free. Sterile.Material membrane: Polycarbonate
Cell Culture Plates Falcon®, treated, PS, sterile
Cell Culture Plates with lid, condensation rings, and deep-well design for reduced contamination and evaporation. Reliable vacuum-gas plasma tissue culture treatment provides well-to-well and plate-to-plate consistency.TC-treated polystyreneWith special low evaporation lidFlat bottomPyrogen-free
Cell culture plates Nunc™, PS, with Nunclon™ Supra surface
Cell culture plates with Nunclon™ Supra surface are designed for the cultivation of fastidious adherent cells. The Nunclon™ Supra surface is more hydrophilic than the Nunclon™ Delta surface and enhances the growth of sensitive cell types under serum-free or low-serum conditions.Non-cytotoxic, pyrogen-freeSterile (SAL of 10-6)Biocompatible acc. to USP Class VI for raw materialsShelf life 5 years from manufacturing date
Cell Culture Plates, non-treated, PS, sterile
Standard surface non-treated cell culture plates. Reduced evaporation due to raised well rims and uniform rings on the lids.Available with 4-, 6-, 12-, 24-, 48-, 96- or 384-wells (lid included)Flat well bottom96-well plate also available as round bottom plate (4.672 531)Single position lid reduces the risk of cross-contaminationsWells are labeled with alphanumeric code for easy identificationSterilized by gamma irradiationPyrogen-freeMaterial: Polystyrene
Cell Culture Plates, treated, PS, sterile
These standard surface treated cell culture plates for the cultivation of adherent cells exhibit a reduced evaporation due to raised well rims and uniform rings on the lids.Single position lid reduces the risks of cross-contaminationsWells are labeled with alphanumeric code for easy identificationSterilized by gamma irradiationPyrogen-free
Cell culture plates, treated, PS, sterile, with 8-well strips
These standard surface treated cell culture plates for the cultivation of adherent cells exhibit a reduced evaporation due to raised well rims and uniform rings on the lids.Single position lid reduces the risks of cross-contaminationsWells are labeled with alphanumeric code for easy identificationSterilized by gamma irradiationPyrogen-free
Cell culture plates, with 3DSphearo™ Ultra-low Adsorption surface, PS, sterile
The three-dimensional (3D) spheroid model can better simulate the three-dimensional cell networks, cell-matrix, and cell-cell interactions and is ideally suited for drug screening, in vitro tumour research and exploration of stem cell differentiation and sorting.The 3DSphearo™ Ultra-low Adsorption surface has been designed for spheroids (e.g. 3D tumour spheroids) and organoid cultures. The surface has been subjected to a special gel treatment, which gives the cell culture plate extremely strong anti-protein adsorption and anti-cell adhesion. This promotes the suspension growth of cells and enables fast, consistent, and reproducible cell spheroid culture.Surface is non-cytotoxic, biologically inert, and non-degradableDNase/RNase-freePyrogen-freeSterile
Cell culture tubes Nunc™, PS, sterile, with flat side
The surface of the tubes is coated with Thermo Scientific™ Nunclon™ Δ and designed for the cultivation of adherent cell cultures. With cap made of PE.Suitable for microscopy, use of cover glasses possibleLeakproof
Cell culture tubes Nunc™, PS, sterile, with round bottom
The surface of the tubes is coated with Thermo Scientific™ Nunclon™ Δ. With cap made of PE.
Cell disruption shaker Bead GenieTM
Ideal for extractions, lysing, or homogenisation applications utilizing metal or glass beads.Provides accuracy, reproducibility, and repeatability with complete control of speed and timeVariable RUN/STOP timer provides rapid pulsing for superior interval mixingProgrammable timer from 1 s to 99 min or continuous operationSolid metal casting ensures stable performance without movementCompact design for use e.g. in safety cabinetsScope of supply: Cell disruption shaker, horizontal holder for 12 microtubes (1.5 or 2.0 ml), vertical holders for 12 microtubes (1.5 or 2.0 ml), 6 tubes (15 ml) and 3 tubes (50 ml)Please order beads separately.
Cell disruption shakers Disruptor Genie® analog
The patented Disruptor Genie® provides a multi-directional action, which simultaneously agitates and vortexes at high speed, dramatically increasing cell disruption or sample resuspension efficiency. Ideal for difficult glass bead procedures (Glass beads - please order separately), cell disruption/homogenisation of yeast, bacteria, plant and animal tissues and pellet resuspensions or anything that requires extremely violent, high-speed agitation.Patented multi-directional action simultaneously agitates and vortexes at high-speed producing greater yields in less timeHands-Free disruption of up to twelve 1.5ml or 2.0ml microtubesPerformance comparable to expensive ultrasonic cell disruptors/homogenisers.Suitable for use in cold rooms or incubatorsTimer from 0 to 15 minutes or continuous operationSupplied with: Disruptor Genie, tube holder for 12 tubes, pop-off cup
Cell disruption shakers Disruptor Genie® digital
The patented Disruptor Genie® provides a multi-directional action, which simultaneously agitates and vortexes at high speed, dramatically increasing cell disruption or sample resuspension efficiency. Ideal for difficult glass bead procedures (Glass beads - please order separately), cell disruption/homogenisation of yeast, bacteria, plant and animal tissues and pellet resuspensions or anything that requires extremely violent, high-speed agitation.Patented multi-directional action simultaneously agitates and vortexes at high-speed producing greater yields in less timeHands-Free disruption of up to twelve 1.5ml or 2.0ml microtubesPerformance comparable to expensive ultrasonic cell disruptors/homogenisers.Suitable for use in cold rooms or incubatorsTimer from 0 to 99 minutes or continuous operationSupplied with: Disruptor Genie, tube holder for 12 tubes, pop-off cup
Cell Factories EasyFill™ mit Nunclon™Δ Surface, PS, sterile
A time and space saving vessel for large scale cell culture production. Suitable for industrial scale production of vaccines, monoclonal antibodies or pharmaceuticals. Nunclon™Δ surface modification is certified for cell culture and ensures consistent cell growth layer to layer, lot to lot. Ready to use and easy to fill and empty with plug and play connection. Wide range of accessories available for different methods of filling, venting and harvesting (please see Cell Factories Accessories). Sterile.Material cell factories: Polystyrene
Cell Factories with Nunclon™Δ Surface, PS, sterile
Cell culture Cell Factories are optimal for industrial scale production of vaccines, monoclonal antibodies or pharmaceuticals. Nunclon™Δ modification is certified for cell culture, ideal for adherent cells and can be used for suspension cultures. Available in 1, 2, 4, 10 or 40 tray versions for easy scale-up. Additional connectors etc. please see Cell Factories Accessories. Sterile.Material Cell Factories: Polystyrene