Accessories for shakers HS/KS 260
AS 260.1 Universal attachmentAble to hold most types of container using adjustable tension rollers. Surface: 320 x 320 mmAS 260.3 Petri dish attachmentFor gentle mixing and suspension of cell cultures or growth media in petri dishes, culture bottles and containers. With integral anti-slide mat (PP).
Accessories for Shakers KS/HS 501 digital
For orbital shaker KS 501 digital and reciprocating shaker HS 501 digital.AS 501.1 Universal attachmentFor a variety of vessels (flasks, beakers etc.) with volumes of at least 50 ml (ideally greater than 250 ml). With tension rollers that can be mounted on 2 levels.Usable area: 420 mm x 420 mm.AS 501.5 Dish attachmentFor the gentle movement of petri dishes, but also suitable for gentle mixing in vessels with large, flat bottoms (wide mouth erlenmeyers, beakers). Fitted with a non-slip, plastic mat.Usable area: 420 mm x 420 mm.
Accessories for universal shaker SM 30
Combifix SM A attachment: Flexible attachment with 5 clamping bars for various containers with flat bases.Combifix SM B attachment: With 4 clamping bars for holding horizontal or tall containers securely.Combifix SM C attachment: For separating funnels.Universal tray SM: For flexible fitting with accessory spring clips or test tube stands.Sliding Plates: Sliding plates with Combifix SM (rack systems Combifix SM, but with additional base plate).Mounting set: for universal trays, or sliding plates on the 2-storey top frame SM.SM attachment, 2-storey support: With 2 boards for spring clips (please order separately) or for mounting Combifix SM attachments.2-storey top frame SM / TH: 2-storey top frame for all SM shakers. Dimensions adapted to TH 30. For vessels with a max. height of 14 cm (Erlenmeyer flasks 200 / 250 ml). Dimensions (w x d x h): 600 x 402 x 192 mm. For fastening the vessels, either universal trays SM or sliding plates with Combifix SM can be used.
Additional Stirrer Blades for Bola Stirrer Shafts, PTFE
Useful extension to the existing range of Bola stirrer shafts. The additional blades can optionally be fixed in your preferred position on every stirrer shaft with diameter 8,10 or 16 mm (a flat spanner is included). The stirrer blades are entirely made of PTFE, the mounting devices are made of a special PTFE-compound. A high chemical and thermical (-200 to +250 °C) resistance is assured. This "building block system" allows the user to define a stirrer of their own special requirements.
Adhesive mat
Blue adhesive mat for securing vessels on shakers that cannot be fixed with conventional clamps or roller bars. The patented material is naturally adhesive. The adhesive properties can be renewed by rinsing.
Adjustable platforms, stainless steel
Adjustable clamping bars accommodate various vessel types. The base tray has a non-slip rubber surface. Large Vessel Carriers are ideal for large sample containers like carboys, jugs, and bottles.
Adjustable tube rack IO R 2.10
The adjustable tube rack can be attached to all IKA orbital and horizontal shakers in combination with the AS fixing clamp attachments, as well as to the SP shaking platforms of the INC 125 FS incubators. With the spring fixation, up to 60 vessels with a diameter of 8 to 30 mm can be attached. The shaking angle of the samples can be easily adjusted using the side knobs.Number of sample tubes:Ø 8 to 11 mm: 60 piecesØ 12 to 15 mm: 40 piecesØ 15 to 18 mm: 28 piecesØ 18 to 21 mm: 20 piecesØ 22 to 26 mm: 15 piecesØ 26 to 30 mm: 60 pieces
Ampoule/tube attachments for vortexers Vortex-Genie®
The attachments enable vigorous mixing of samples in tubes or ampoules.
Anchor stirrer for Overhead Stirrers
These impellers are recommended for applications which require a low speedFor mixing products with medium or high viscosity
Anchor stirrer, PTFE
The stirrer shafts consist of a PTFE-jacketed, stainless steel shaft and a stirrer paddle made of solid PTFE. The stainless steel core assures stability of the stirrer shaft and allows safe attachment of the stirrer chuck. Thanks to the thick PTFE coat and the paddle made of solid PTFE, the medium will only come into contact with PTFE. High chemical resistance makes it almost universally suitable. PTFE is extremely nonstick so that residues are repelled from shaft and paddle. The stirrer shafts are similar in size to (KPG) glass stirring rods and are therefore interchangeable easily.Operating temperature: -200°C to +250°CAdditional sizes and accessories are available on request.Information on the mixing effects of the different stirring geometries can be found in the descriptions of the stainless steel stirring rotors.Recommended for low speed operations.Additional wings available on request
Anchor stirrers, stainless steel 1.4571
The anchor stirrers create a tangential flow and high shear forces between the vessel wall and stirring blades. Especially suitable for medium to high viscosity fluids. Recommended for low speed operations.
Anchor stirring rotors, stainless steel
The anchor-shape rotor creates a tangential flow and high shear forces between the vessel wall and stirring blades. This stirrer is especially suitable for medium to high viscosity fluids. Recommended for low speed operations.
Attachements Heat-On for Magnetic Stirrers
These attachments are by far the safest, fastest and most efficient method for heating and mixing solutions in round-bottom flasks from 10 ml to 5L. Heat-On fits precisely to every flask, thus insuring maximum surface contact and fast heat transfer. This eliminates the need for oil as a heat conductor.This unique design prevents glass breakage and protects from spilled chemicals or solventsThe high temperature range provides unlimited safety for applications up to 260°CA unique PTFE coating on the aluminum Heat-On body allows for superior chemical resistance and many years of service life150 ml of water boils in less than 11 minutes
