Compact shaker KS 15 B control
Robust shaker for medium loads. Cost-effective. Suitable for continuous operation.Controller with touch display and advanced featuresReciprocal shaking motionProgrammable timerScope of supply: Shaker without platform
Compact shaker KS 15 B, with attachment Combifix KS
Robust shaker for medium loads. Cost-effective. Suitable for continuous operation.Analogue controlReciprocal shaking motionTimer 0 to 120 min.Scope of supply: Shaker with attachment Combifix KS
Culture platforms, stainless steel 304
Ideal for slow speed applications like petri dishes, culture flasks, and other flat bottom, low profile vessels. The platform has a non-slip rubber surface.
Deep well plate thermoshaker TS-DW
A thermoshaker designed for shaking and heating of deep well plates. A multisystem principle, used in the design of the thermoshaker allows it to operate as 3 independent devices: Incubator, Plate shaker and Thermoshaker.Profiled platform for perfect plate fit and maximum heat transferTemperature setting range: +25 to 100°CTemperature control range: +5°C above ambient to 100°CShaking speed: 250 to 1400rpmRapid heat-up speedVery small footprintApplications: Life science applications, molecular biology, cell biology lab, cell lysis, DNA isolation and purification, sample preparation for PCR, pellet re-suspension, or any other method where you have many samples that need mixing in deep well plates.
Digital Cel-Gro Tissue culture rotator
Rotator for effective and gentle mixing of biological samples. Suitable for versatile applications in the life science sector.Compact designBrushless motorFor tubes from 1.5 to 50 mlAdjustable rotation angleDigital speed controlTimer 0 to 9999 min
Digital Multi-tube vortex mixer MULTI-TX5
Ideal for all demanding mixing tasks with multiple tubes. The tubes are placed in matching foam racks and the samples can then be mixed, homogenised or emulsified.Interchangeable foam racks available for different tube diametersPowerful brushless motorSmall footprintIntuitive control panel for setting and monitoring stirring speed and stirring timeDigital dual displaySafety lock avoids unintentional setting changesBuilt-in timer (1 min to 99 h 59 min)Various modes selectable: Pulse mode, continuous mode, intermittent mode, autoreverseScope of supply: Multi-tube vortex mixer, sample rack for 44 tubes (Ø 12 mm)
Digital Orbital Shaker
Electronically controlled and programmable shakersSlow, soft-start greatly decreases the risk of spillsErlenmeyer flasks, beakers, culture flasks and micro plates can easily be fixed using 8 rubber stripsDigital LCD display for speed and run time controlIntegrated overload shutdownPermanent motor feedback, which automatically adjusts the speed even if the load is changed during operationContinuous mode or timer for up to 49 hoursSoft rubber feet minimise system movementPlatform with non-slip surfacePlatform capacity:Erlenmeyer Flasks e.g.: 25 x 50 ml, 16 x 125 ml, 9 x 250 ml, 4 x 500 ml, 4 x 1000 ml, 1 x 2000 mlBeakers e.g.: 36 x 50 ml, 25 x 100 ml, 16 x 250 ml, 9 x 400 ml, 4 x 1000 mlDeep well assay plates e.g.: 6 x standard (more if stacking is an option)Supplied with: Orbital Shaker incl. universal attachment, universal power supply, non-slip rubber mat and 8 elastic ties
Digital Platform rocker
The Digital Platform rocker is suitable for gentle and consistent mixing. Ideal for hybridisation, blotting and gel staining applications.Adjustable tilt angleInfinitely variable speed controlTimer adjustable from 1 s to 9999 minSuitable for continuous operationPlatform with dimpled rubber mat keeps samples in positionRobust ABS housingOptionally, another platform can be added for a 2-tier structure. Please order separately.
Digital Vortex Mixer
For continuous mixing or pulsing of samples with accurate speed control.Digital display of speed and timeContinuous and touch modesTimer (1 to 99 min)2 timer modes: down-counting for repeat tests and timer continuous operationScope of supply: Digital Vortex Mixer, rubber platform
Digital Vortexer
The versatile device combines digital precision with ergonomic comfort and a durable construction.Multiple-position head allows vortexing at angles beyond 90 degrees for enhanced versatilityVariable speed control offers flexibility and precise control of mixing intensityIlluminated digital displayThe touchpad is suitable for working with glovesPrevents from user fatigue due to minimal activation forceABS and silicone housing is resistant to common chemicals and easy to cleanStable platform and elastomer feet keep the device stable during operationComplies with safety and conformity certificates
Digital Vortexer LLG-uniTEXER 4
Compact vortexer with brushless motor and infinitely variable speed control up to 4200 rpm for optimal mixing results. The digital display alternately shows the set speed and time.Programmable Pulse mode3-way switch (on/off/touch)Timer adjustable from 1 min up to 999 minScope of supply: Vortexer, conical tube attachment, round disk attachment, universal plug
Dimpled mat for platform rocker PMR-30, tumbling-platform rotator PS-3D and multi-function rotator PSM-3D
Prevents tubes from rolling around.
Disc rotator LLG-uniLOOPMIX 2
Analogue disc rotator for gentle and effective sample mixing. Suitable for all biological samples. With easily interchangeable clamps that allow a quick cleaning of the rotator.For a maximum of 48 x 1.5 ml, 16 x 5 or 15 ml, 8 x 50 ml tubes. Also for parallel use of different sizes, can be equipped individually.Compact designHousing easy to cleanNon-slip, adjustable screw feetAdditional clamps on requestScope of supply: Disc rotator incl. 12 clamps each for 2 ml, 15 ml and 50 ml tubes
Drum for Clip Plates STR/1 for overhead shakers DR-200
Square drum which accepts one plate of clips on each side.Please order Clip Plates for different tube sizes, tubes and drive DR-200 separately.
Drum for four bottles STR4/4 for overhead shakers DR-200
Perspex four segment cradle with velcro straps. Holds 2 to 4 bottles, each up to 1000 ml capacity.With BioCote, silver-based, antimicrobial protection.Please order drive DR-200 separately.
Drum for microcentrifuge tubes STR4/5 for overhead shakers DR-200
Holds four acrylic racks for end over end mixing of 1.5 ml microcentrifuge tubes. Supplied with four racks, each with a capacity of 60 tubes.With BioCote, silver-based, antimicrobial protection.Please order drive DR-200 separately.
Drum for one bottle STR4/3 for overhead shakers DR-200
The drum has a platform which can be adjusted within the drum from horizontal to 45°. In this way, the sample container can be rolled and turned end over end at the same time (figure-8 motion). Suitable for extractions, paint mixing, powders and granular samples. The sample container is held by an adjustable velcro strap.With BioCote, silver-based, antimicrobial protection.Please order drive DR-200 separately.
Drum for two bottles STR4/2 for overhead shakers DR-200
Drum with two platforms. Accepts two 250 ml conical flasks or reagent bottles.With BioCote, silver-based, antimicrobial protection.Please order drive DR-200 separately.
Elastic bands for recessed platform for vortexers Vortex-Genie®
Elastic bands for attaching various sample vessels to the recessed platform. Suitable for microtitre plates, as well as vessels up to 500 ml.
Eppendorf ThermoMixer C
The Eppendorf ThermoMixer C combines unique mixing performance with excellent temperature control to consistently guarantee complete, dependable and reproducible test results. Improve your assay results by mixing and incubating samples at the same time.Excellent mixing performance due to unique 2DMix-Control technologyPrevent condensation and improve temperature homogeneity with the new ThermoTopErgonomic designEppendorf QuickRelease™ Technology for fast and simple block exchange of Eppendorf SmartBlocks™Highest flexibility thanks to broad choice of exchangeable SmartBlocks™Heating, mixing and cooling of all common tubes and microplates with a volume range of 5µl to 50mlNow you can control the temperature of your samples with ease: The ThermoTop, with unique condensation protection technology, reliably prevents condensation formation on the tube lid and wall. It also improves temperature homogeneity. The Eppendorf ThermoTop does not have a cable connection. It is detected by the device as soon as it is positioned, via inductive signal transmission, and thermo-regulation starts automatically. The sample temperature is not affected: optimal sample protection with optimal reaction conditions produce optimal results.
Eppendorf ThermoMixer™ F0.5/F1.5/F2.0/FP
To simplify lab routines. Whether work with regularly 0.5, 1.5 or 2.0 ml reaction vessels or plates (MTP and DWP) - the customized systems from Eppendorf offer the perfect solution for special applications. The devices combine precise heating and mixing with the highest stability, even at maximum mixing frequency. Mixing and incubation steps can be performed independently.For 24 reaction vessels or one microplate/deepwell plateEfficient mixing thanks to 2DMix-Control and anti-spill technologySimple and intuitive operation using predefined temperature keys (37 °C, 42 °C, 56 °C and 95 °C)Improved temperature homogeneity with the new ThermoTop
Erlenmeyer Flask Clamps, PVC
Constructed of one piece, molded PVC. Autoclavable. Will not scratch or mark flask like other clamps. Incl. screws for easy attachment to universal platforms. Ideal for polycarbonate flasks.
Exchangeable blocks Eppendorf SmartBlocks™
Flexibility has never been this easy. Eppendorf offers a variety of SmartBlocks™ for tubes from 0.5 ml to 50 ml.Fast and simple block exchange due to Eppendorf Quick ReleaseOptimized block design guarantees maximum temperature transfer to the sample
Extension platform for Mini-100 Orbital-Genie®/Genie Temp-Shaker 100
Non-slip tray that extends the capacity of shakers. 2 platforms can be stacked.
Fixing clip platform AS 130.2
For shaking round bottom vessels, volumetric and Erlenmeyer flasks.Supplied without clips.
Fixing clip platform AS 260.2
For shaking round bottom vessels, volumetric and Erlenmeyer flasks.Max. number of clips (capacity held): 56 x AS 2.1 (25 ml), 23 x AS 2.2 (50 ml), 23 x AS 2.3 (100 ml), 11 x AS 2.4 (250 ml), 9 x AS 2.5 (500 ml), 5 x AS 2.6 (1000 ml)Supplied without clips.
Fixing clip platform AS 501.4
For shaking round bottom, flat-bottom, pear-shaped, volumetric and erlenmeyer flasks etc. Minimum volume 25 ml.Capacity: Number of fixing clips (volume held) 110 x AS 2.1 (25 ml), 55 x AS 2.2 (50 ml), 35 x AS 2.3 (100 ml), 16 x AS 2.4 (250 ml), 12 x AS 2.5 (500 ml), 8 x AS 2.6 (1000 ml)Without spring clips.
Flask Clamps, stainless steel
Clamps for Erlenmeyer flasks, Media bottles* and Fernbach flasks**. Incl. screws for easy attachment to platforms. Clamps for flasks with 50 ml and higher are supplied with a spring to hold the flask in place.
Flask shaker WA-200
Creates a vigorous reciprocal shaking action. With clamps to accept 8 flasks up to 500 ml capacity. With stepless variable speed control from 80 to 800 oscillations/min. and 10 to 60 minute timer with off and continuous run settings. Electronic feedback control ensures a constant speed irrespective of the load.With BioCote, silver-based, antimicrobial protection.Scope of supply: Flask shaker incl. 2 arms, 8 clamps and allen keyPlease order extension kit for shaking of 12 bottles or flasks separately.
Foam inserts for Mini Vortex Mixers
The Insert Retainer is required for use of the Foam inserts. Please order separately.
Foam inserts for recessed platform for vortexers Vortex-Genie®
For use with the recessed platform. Ideal for shaking and mixing several test tubes with different diameters.Please order recessed platform separately.
Foam inserts for shaker platform for vortexers Vortex-Genie®
For use with the shaker platform. Ideal for shaking and mixing samples in reaction vessels or microtitre plates.Please order shaker platform separately.