Accessories for orbital shaker KS 130
AS 130.1 Universal attachment: Able to hold most types of container using adjustable tension rollers.AS 130.3 Petri dish attachment: For gentle mixing and suspension of cell cultures or growth media in petri dishes, culture bottles and containers. With integral anti-slide mat (PP).AS 130.4 Test tube holder: For intensive vibrating of small tubes, test tubes, cuvettes, centrifuge tubes.
Accessories for Shakers KS/HS 501 digital
For orbital shaker KS 501 digital and reciprocating shaker HS 501 digital.AS 501.1 Universal attachmentFor a variety of vessels (flasks, beakers etc.) with volumes of at least 50 ml (ideally greater than 250 ml). With tension rollers that can be mounted on 2 levels.Usable area: 420 mm x 420 mm.AS 501.5 Dish attachmentFor the gentle movement of petri dishes, but also suitable for gentle mixing in vessels with large, flat bottoms (wide mouth erlenmeyers, beakers). Fitted with a non-slip, plastic mat.Usable area: 420 mm x 420 mm.
Adhesive mat
Blue adhesive mat for securing vessels on shakers that cannot be fixed with conventional clamps or roller bars. The patented material is naturally adhesive. The adhesive properties can be renewed by rinsing.
Adjustable platforms, stainless steel
Adjustable clamping bars accommodate various vessel types. The base tray has a non-slip rubber surface. Large Vessel Carriers are ideal for large sample containers like carboys, jugs, and bottles.
Adjustable tube rack IO R 2.10
The adjustable tube rack can be attached to all IKA orbital and horizontal shakers in combination with the AS fixing clamp attachments, as well as to the SP shaking platforms of the INC 125 FS incubators. With the spring fixation, up to 60 vessels with a diameter of 8 to 30 mm can be attached. The shaking angle of the samples can be easily adjusted using the side knobs.Number of sample tubes:Ø 8 to 11 mm: 60 piecesØ 12 to 15 mm: 40 piecesØ 15 to 18 mm: 28 piecesØ 18 to 21 mm: 20 piecesØ 22 to 26 mm: 15 piecesØ 26 to 30 mm: 60 pieces
Benchtop Shakers MaxQ 416 HP
The benchtop shaker is designed to operate in reach-in incubators, environmental rooms, or on lab benches. It performs continuously, even in temperatures from 4 ºC to 40 ºC (39.2 ºF to 104 ºF) and in the following humidity conditions: 80 % RH at or below 31 ºC (87.8 ºF), decreasing linearly to 50 % RH at 40 ºC (104 ºF).Choice of two platform sizes maximizes capacityTriple counter-balanced mechanism for optimum handling of full or unbalanced loads regardless of vessel placement and completely eliminates walkingOver-sized, adjustable, suction cup style, rubber feet minimize vibration and provide maximum stabilityHeavy-duty, triple counter-balanced eccentric drive allows extended speed ranges of 25 to 525 rpmPower supply 115/230 V, 50/60 Hz
Clamp screw spare kit for orbital shakers Solaris™
Spare kit with clamp screws.
Clamps for IKA shakers and shaking incubators
Clamps for safe shaking of Erlenmeyer flasks.
Clamps for Separating Funnels for Shaking trays, stainless steel
Other clamps on request
Compact shaker KS 15 A
Robust shaker for medium loads. Cost-effective. Suitable for continuous operation.Analogue controlOrbital shaking motionTimer 0 to 120 min.Scope of supply: Shaker without platform
Compact shaker KS 15 A control
Robust shaker for medium loads. Cost-effective. Suitable for continuous operation.Controller with touch display and advanced featuresOrbital shaking motionProgrammable timerScope of supply: Shaker without platform
Compact shaker KS 15 A, with attachment Combifix KS
Robust shaker for medium loads. Cost-effective. Suitable for continuous operation.Analogue controlOrbital shaking motionTimer 0 to 120 min.Scope of supply: Shaker with attachment Combifix KS
Culture platforms, stainless steel 304
Ideal for slow speed applications like petri dishes, culture flasks, and other flat bottom, low profile vessels. The platform has a non-slip rubber surface.
Digital Orbital Shaker
Electronically controlled and programmable shakersSlow, soft-start greatly decreases the risk of spillsErlenmeyer flasks, beakers, culture flasks and micro plates can easily be fixed using 8 rubber stripsDigital LCD display for speed and run time controlIntegrated overload shutdownPermanent motor feedback, which automatically adjusts the speed even if the load is changed during operationContinuous mode or timer for up to 49 hoursSoft rubber feet minimise system movementPlatform with non-slip surfacePlatform capacity:Erlenmeyer Flasks e.g.: 25 x 50 ml, 16 x 125 ml, 9 x 250 ml, 4 x 500 ml, 4 x 1000 ml, 1 x 2000 mlBeakers e.g.: 36 x 50 ml, 25 x 100 ml, 16 x 250 ml, 9 x 400 ml, 4 x 1000 mlDeep well assay plates e.g.: 6 x standard (more if stacking is an option)Supplied with: Orbital Shaker incl. universal attachment, universal power supply, non-slip rubber mat and 8 elastic ties
Erlenmeyer Flask Clamps, PVC
Constructed of one piece, molded PVC. Autoclavable. Will not scratch or mark flask like other clamps. Incl. screws for easy attachment to universal platforms. Ideal for polycarbonate flasks.
Extension platform for Mini-100 Orbital-Genie®/Genie Temp-Shaker 100
Non-slip tray that extends the capacity of shakers. 2 platforms can be stacked.
Fixing clip platform AS 130.2
For shaking round bottom vessels, volumetric and Erlenmeyer flasks.Supplied without clips.
Fixing clip platform AS 501.4
For shaking round bottom, flat-bottom, pear-shaped, volumetric and erlenmeyer flasks etc. Minimum volume 25 ml.Capacity: Number of fixing clips (volume held) 110 x AS 2.1 (25 ml), 55 x AS 2.2 (50 ml), 35 x AS 2.3 (100 ml), 16 x AS 2.4 (250 ml), 12 x AS 2.5 (500 ml), 8 x AS 2.6 (1000 ml)Without spring clips.
Flask Clamps, stainless steel
Clamps for Erlenmeyer flasks, Media bottles* and Fernbach flasks**. Incl. screws for easy attachment to platforms. Clamps for flasks with 50 ml and higher are supplied with a spring to hold the flask in place.
