Magnetic stirrer SHP-300-BS/WS
Magnetic stirrers with precise temperature control.LED speed displayLarge 7-segment digital display shows set and actual temperatureSpill-resistant front control panel with chemically toughened glass for extra resilienceHot surface warning light flashes when plate temperature is above 50 °COptional digital temperature controller for precise control of sample temperatureWith BioCote, silver-based, antimicrobial protectionThe ceramic coated aluminium top plate with a heated area of 150x150 mm offers excellent heat transmission, rapid heating, and even temperature distribution.
Magnetic stirrer ST-200-C
Without heatingCompact, space saving designTop plate made of glass ceramicElectronic variable speed control with off positionWith BioCote® coating. Based on the antibacterial effect of silver, the growth of microorganisms and bacteria is prevented.
Magnetic stirrer ST-200-P, with battery operation.
For use in the field or inside incubators or glove boxes where external power supply is impractical. With BioCote, silver-based, antimicrobial protection. Maximum speed 1300rpm. Maximum volume stirred 1.5L (H2O). Top plate 150 mm x 160 mm. Variable speed control with battery status indicator. ABS casing 70 mm high. Accessory adapters are available for use on 230V 50Hz mains or 12V vehicle supply using the cigar lighter socket.
Magnetic stirrer ST-200-S
Without heatingCompact, space saving designTop plate made of stainless steelElectronic variable speed control with off positionWith BioCote® coating. Based on the antibacterial effect of silver, the growth of microorganisms and bacteria is prevented.
Magnetic stirrer steriMIXdrive for external control
Due to the external control, these magnetic stirrers are suitable for use in ovens, incubators, safety cabinets or for underwater operation, depending on the device. Wide speed ranges make them ideal for viscous media. Low space requirement due to the flat and compact design with maximum stirring surface.Maintenance-free 2mag motor driveFully sealed housingExtremely robust construction and designEasy to clean and maximum resistance3 years warrantyMade in GermanyPlease always order control units separately.Pressure, steam, vacuum and temperature-resistant magnetic stirrer for operation in steam sterilisers.Encapsulated, pressure and vacuum tight housing, temperature resistant up to 150 °CeasyMOUNT plug coupling for quick installation of the stirrer cable through a pressure and steam tight grommetHigh power transmission over longer distances or for thick vessel bottomsmixWATCH stirring rod monitoring in connection with steriMIXcontrol
Magnetic stirrer with heating AREC 10 Advance
The AREC 10 Advance is characterised by precise temperature control, several connection options, advanced functions and improved user-friendliness. The user interface with capacitive buttons and a tempered glass control panel ensures seamless navigation and can be read from any angle. The powerful brushless motor reliably stirs up to 25 l (H2O). Thanks to SpeedServo™ technology, the set speed remains constant even when the viscosity changes. Various stirring modes, such as auto-reverse, intermittent operation and programmable speed limits make the AREC 10 Advance extremely versatile. The 10-inch ceramic plate is particularly resistant to chemicals and ensures uniform heat distribution. If an external sensor is connected, 2 thermoregulation modes can be selected: FAST (fast temperature rise) and FINE (optimised temperature control with minimal overshoot). In addition, up to 9 temperature and speed ramps can be programmed. The integrated timer in countdown or count-up mode enables precise time management. Built-in functions such as the safety lock button and overheating protection ensure safety in the laboratory. The ‘Hot’ warning appears on the display if the plate exceeds 50 °C, even if the heating is switched off. Data can be saved via the USB interface and exported to a PC for further analysis. Stirring and heating curves can be easily visualised on the PC using the ControllerSoft™ software. Alternatively, the AREC 10 Advance can be remotely controlled and monitored in real-time using the VELP Ermes Cloud Platform via PC or mobile devices.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm)
Magnetic stirrer with heating AREC 10 Advance System, with temperature probe
The AREC 10 Advance is characterised by precise temperature control, several connection options, advanced functions and improved user-friendliness. The user interface with capacitive buttons and a tempered glass control panel ensures seamless navigation and can be read from any angle. The powerful brushless motor reliably stirs up to 25 l (H2O). Thanks to SpeedServo™ technology, the set speed remains constant even when the viscosity changes. Various stirring modes, such as auto-reverse, intermittent operation and programmable speed limits make the AREC 10 Advance extremely versatile. The 10-inch ceramic plate is particularly resistant to chemicals and ensures uniform heat distribution. If an external sensor is connected, 2 thermoregulation modes can be selected: FAST (fast temperature rise) and FINE (optimised temperature control with minimal overshoot). In addition, up to 9 temperature and speed ramps can be programmed. The integrated timer in countdown or count-up mode enables precise time management. Built-in functions such as the safety lock button and overheating protection ensure safety in the laboratory. The ‘Hot’ warning appears on the display if the plate exceeds 50 °C, even if the heating is switched off. Data can be saved via the USB interface and exported to a PC for further analysis. Stirring and heating curves can be easily visualised on the PC using the ControllerSoft™ software. Alternatively, the AREC 10 Advance can be remotely controlled and monitored in real-time using the VELP Ermes Cloud Platform via PC or mobile devices.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm), Pt100 temperature probe
Magnetic stirrer with heating AREC 10 Advance System, with temperature probe, rod and clamp
The AREC 10 Advance is characterised by precise temperature control, several connection options, advanced functions and improved user-friendliness. The user interface with capacitive buttons and a tempered glass control panel ensures seamless navigation and can be read from any angle. The powerful brushless motor reliably stirs up to 25 l (H2O). Thanks to SpeedServo™ technology, the set speed remains constant even when the viscosity changes. Various stirring modes, such as auto-reverse, intermittent operation and programmable speed limits make the AREC 10 Advance extremely versatile. The 10-inch ceramic plate is particularly resistant to chemicals and ensures uniform heat distribution. If an external sensor is connected, 2 thermoregulation modes can be selected: FAST (fast temperature rise) and FINE (optimised temperature control with minimal overshoot). In addition, up to 9 temperature and speed ramps can be programmed. The integrated timer in countdown or count-up mode enables precise time management. Built-in functions such as the safety lock button and overheating protection ensure safety in the laboratory. The ‘Hot’ warning appears on the display if the plate exceeds 50 °C, even if the heating is switched off. Data can be saved via the USB interface and exported to a PC for further analysis. Stirring and heating curves can be easily visualised on the PC using the ControllerSoft™ software. Alternatively, the AREC 10 Advance can be remotely controlled and monitored in real-time using the VELP Ermes Cloud Platform via PC or mobile devices.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm), Pt100 temperature probe, rod, clamp
Magnetic stirrer with heating AREC 10 Digital
Robust magnetic stirrer for temperature-sensitive heating and stirring tasks in the laboratory. An external temperature probe can be connected for precise thermoregulation of the sample. The temperature and stirring speed can be easily set and monitored via the bright and user-friendly digital display. Suitable for stirring volumes up to 25 litres. The stirring position made of ceramic is resistant to chemicals and scratches, and is easy to clean. The hot indicator signals when the plate temperature is above 50 °C, even if the heating function is not active. Other safety functions, such as overtemperature protection and safety circuits, protect during daily operation. The SpeedServo™ torque compensation keeps the speed constant even if the viscosity changes.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm)
Magnetic stirrer with heating AREC 10 Digital set, with temperature controller
Robust magnetic stirrer for temperature-sensitive heating and stirring tasks in the laboratory. An external temperature probe can be connected for precise thermoregulation of the sample. The temperature and stirring speed can be easily set and monitored via the bright and user-friendly digital display. Suitable for stirring volumes up to 25 litres. The stirring position made of ceramic is resistant to chemicals and scratches, and is easy to clean. The hot indicator signals when the plate temperature is above 50 °C, even if the heating function is not active. Other safety functions, such as overtemperature protection and safety circuits, protect during daily operation. The SpeedServo™ torque compensation keeps the speed constant even if the viscosity changes.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm), VTF temperature controller, rod
Magnetic stirrer with heating AREC 10 Digital set, with temperature probe
Robust magnetic stirrer for temperature-sensitive heating and stirring tasks in the laboratory. An external temperature probe can be connected for precise thermoregulation of the sample. The temperature and stirring speed can be easily set and monitored via the bright and user-friendly digital display. Suitable for stirring volumes up to 25 litres. The stirring position made of ceramic is resistant to chemicals and scratches, and is easy to clean. The hot indicator signals when the plate temperature is above 50 °C, even if the heating function is not active. Other safety functions, such as overtemperature protection and safety circuits, protect during daily operation. The SpeedServo™ torque compensation keeps the speed constant even if the viscosity changes.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm), Pt100 temperature probe
Magnetic stirrer with heating AREC 10 Digital set, with temperature probe, rod, clamp
Robust magnetic stirrer for temperature-sensitive heating and stirring tasks in the laboratory. An external temperature probe can be connected for precise thermoregulation of the sample. The temperature and stirring speed can be easily set and monitored via the bright and user-friendly digital display. Suitable for stirring volumes up to 25 litres. The stirring position made of ceramic is resistant to chemicals and scratches, and is easy to clean. The hot indicator signals when the plate temperature is above 50 °C, even if the heating function is not active. Other safety functions, such as overtemperature protection and safety circuits, protect during daily operation. The SpeedServo™ torque compensation keeps the speed constant even if the viscosity changes.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm), Pt100 temperature probe, rod, clamp
Magnetic stirrer with heating AREC 4
Robust magnetic stirrer for general heating and stirring tasks in the laboratory. Suitable for stirring volumes of up to 5 litres. The stirring position made of ceramic is resistant to chemicals and scratches, and is easy to clean. Two illuminated indicators signal when the heating plate reaches over temperature, or the stirring system is not working correctly. A warning symbol indicates when the temperature of the plate is above 50 °C, even if the heating function is not active. The SpeedServo™ torque compensation keeps the speed constant even if the viscosity changes.
Magnetic stirrer with heating AREC 4 Digital
Compact, robust magnetic stirrer for temperature-sensitive heating and stirring tasks in the laboratory. An external temperature probe can be connected for precise thermoregulation of the sample. The temperature and stirring speed can be easily set and monitored via the bright and user-friendly digital display. Suitable for stirring volumes up to 5 litres. The stirring position made of ceramic is resistant to chemicals and scratches, and is easy to clean. The hot indicator signals when the plate temperature is above 50 °C, even if the heating function is not active. Other safety functions, such as overtemperature protection and safety circuits, protect during daily operation. The SpeedServo™ torque compensation keeps the speed constant even if the viscosity changes.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm)
Magnetic stirrer with heating AREC 4 Digital set, with temperature controller
Compact, robust magnetic stirrer for temperature-sensitive heating and stirring tasks in the laboratory. An external temperature probe can be connected for precise thermoregulation of the sample. The temperature and stirring speed can be easily set and monitored via the bright and user-friendly digital display. Suitable for stirring volumes up to 5 litres. The stirring position made of ceramic is resistant to chemicals and scratches, and is easy to clean. The hot indicator signals when the plate temperature is above 50 °C, even if the heating function is not active. Other safety functions, such as overtemperature protection and safety circuits, protect during daily operation. The SpeedServo™ torque compensation keeps the speed constant even if the viscosity changes.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm), VTF temperature controller, rod
Magnetic stirrer with heating AREC 4 Digital set, with temperature probe
Compact, robust magnetic stirrer for temperature-sensitive heating and stirring tasks in the laboratory. An external temperature probe can be connected for precise thermoregulation of the sample. The temperature and stirring speed can be easily set and monitored via the bright and user-friendly digital display. Suitable for stirring volumes up to 5 litres. The stirring position made of ceramic is resistant to chemicals and scratches, and is easy to clean. The hot indicator signals when the plate temperature is above 50 °C, even if the heating function is not active. Other safety functions, such as overtemperature protection and safety circuits, protect during daily operation. The SpeedServo™ torque compensation keeps the speed constant even if the viscosity changes.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm), Pt100 temperature probe
Magnetic stirrer with heating AREC 4 Digital set, with temperature probe, rod, clamp
Compact, robust magnetic stirrer for temperature-sensitive heating and stirring tasks in the laboratory. An external temperature probe can be connected for precise thermoregulation of the sample. The temperature and stirring speed can be easily set and monitored via the bright and user-friendly digital display. Suitable for stirring volumes up to 5 litres. The stirring position made of ceramic is resistant to chemicals and scratches, and is easy to clean. The hot indicator signals when the plate temperature is above 50 °C, even if the heating function is not active. Other safety functions, such as overtemperature protection and safety circuits, protect during daily operation. The SpeedServo™ torque compensation keeps the speed constant even if the viscosity changes.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm), Pt100 temperature probe, rod, clamp
Magnetic stirrer with heating AREC 7
Robust magnetic stirrer for general heating and stirring tasks in the laboratory. Suitable for stirring volumes of up to 15 litres. The stirring position made of ceramic is resistant to chemicals and scratches, and is easy to clean. A warning symbol indicates when the temperature of the plate is above 50 °C, even if the heating function is not active. The SpeedServo™ torque compensation keeps the speed constant even if the viscosity changes.
Magnetic stirrer with heating AREC 7 Advance
The AREC 7 Advance is characterised by precise temperature control, several connection options, advanced functions and improved user-friendliness. The user interface with capacitive buttons and a tempered glass control panel ensures seamless navigation and can be read from any angle. The powerful brushless motor reliably stirs up to 20 l (H2O). Thanks to SpeedServo™ technology, the set speed remains constant even when the viscosity changes. Various stirring modes, such as auto-reverse, intermittent operation and settable speed limits make the AREC 7 Advance extremely versatile. The 7-inch ceramic plate is particularly resistant to chemicals and ensures uniform heat distribution. If an external sensor is connected, 2 thermoregulation modes can be selected: FAST (fast temperature rise) and FINE (optimised temperature control with minimal overshoot). In addition, up to 9 temperature and speed ramps can be programmed. The integrated timer in countdown or count-up mode enables precise time management. Built-in functions such as the safety lock button and overheating protection ensure safety in the laboratory. The ‘Hot’ warning appears on the display if the plate exceeds 50 °C, even if the heating is switched off. Data can be saved via the USB interface and exported to a PC for further analysis. Stirring and heating curves can be easily visualised on the PC using the ControllerSoft™ software. Alternatively, the AREC 7 Advance can be remotely controlled and monitored in real-time using the VELP Ermes Cloud Platform via PC or mobile devices.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm)
Magnetic stirrer with heating AREC 7 Advance System, with temperature probe
The AREC 7 Advance is characterised by precise temperature control, several connection options, advanced functions and improved user-friendliness. The user interface with capacitive buttons and a tempered glass control panel ensures seamless navigation and can be read from any angle. The powerful brushless motor reliably stirs up to 20 l (H2O). Thanks to SpeedServo™ technology, the set speed remains constant even when the viscosity changes. Various stirring modes, such as auto-reverse, intermittent operation and settable speed limits make the AREC 7 Advance extremely versatile. The 7-inch ceramic plate is particularly resistant to chemicals and ensures uniform heat distribution. If an external sensor is connected, 2 thermoregulation modes can be selected: FAST (fast temperature rise) and FINE (optimised temperature control with minimal overshoot). In addition, up to 9 temperature and speed ramps can be programmed. The integrated timer in countdown or count-up mode enables precise time management. Built-in functions such as the safety lock button and overheating protection ensure safety in the laboratory. The ‘Hot’ warning appears on the display if the plate exceeds 50 °C, even if the heating is switched off. Data can be saved via the USB interface and exported to a PC for further analysis. Stirring and heating curves can be easily visualised on the PC using the ControllerSoft™ software. Alternatively, the AREC 7 Advance can be remotely controlled and monitored in real-time using the VELP Ermes Cloud Platform via PC or mobile devices.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm), Pt100 temperature probe
Magnetic stirrer with heating AREC 7 Advance System, with temperature probe, rod and clamp
The AREC 7 Advance is characterised by precise temperature control, several connection options, advanced functions and improved user-friendliness. The user interface with capacitive buttons and a tempered glass control panel ensures seamless navigation and can be read from any angle. The powerful brushless motor reliably stirs up to 20 l (H2O). Thanks to SpeedServo™ technology, the set speed remains constant even when the viscosity changes. Various stirring modes, such as auto-reverse, intermittent operation and settable speed limits make the AREC 7 Advance extremely versatile. The 7-inch ceramic plate is particularly resistant to chemicals and ensures uniform heat distribution. If an external sensor is connected, 2 thermoregulation modes can be selected: FAST (fast temperature rise) and FINE (optimised temperature control with minimal overshoot). In addition, up to 9 temperature and speed ramps can be programmed. The integrated timer in countdown or count-up mode enables precise time management. Built-in functions such as the safety lock button and overheating protection ensure safety in the laboratory. The ‘Hot’ warning appears on the display if the plate exceeds 50 °C, even if the heating is switched off. Data can be saved via the USB interface and exported to a PC for further analysis. Stirring and heating curves can be easily visualised on the PC using the ControllerSoft™ software. Alternatively, the AREC 7 Advance can be remotely controlled and monitored in real-time using the VELP Ermes Cloud Platform via PC or mobile devices.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm), Pt100 temperature probe, rod, clamp
Magnetic stirrer with heating AREC 7 Digital
Compact, robust magnetic stirrer for temperature-sensitive heating and stirring tasks in the laboratory. An external temperature probe or the temperature controller VTF can be connected for precise thermoregulation of the sample. The temperature and stirring speed can be easily set and monitored via the bright and user-friendly digital display. Suitable for stirring volumes up to 15 litres. The stirring position made of ceramic is resistant to chemicals and scratches, and is easy to clean. The hot indicator signals when the plate temperature is above 50 °C, even if the heating function is not active. The SpeedServo™ torque compensation keeps the speed constant even if the viscosity changes.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm)
Magnetic stirrer with heating AREC 7 Digital Set, with temperature controller VTF
Compact, robust magnetic stirrer for temperature-sensitive heating and stirring tasks in the laboratory. An external temperature probe or the temperature controller VTF can be connected for precise thermoregulation of the sample. The temperature and stirring speed can be easily set and monitored via the bright and user-friendly digital display. Suitable for stirring volumes up to 15 litres. The stirring position made of ceramic is resistant to chemicals and scratches, and is easy to clean. The hot indicator signals when the plate temperature is above 50 °C, even if the heating function is not active. The SpeedServo™ torque compensation keeps the speed constant even if the viscosity changes.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm), temperature controller VTF, rod
Magnetic stirrer with heating AREC 7 Digital Set, with temperature probe
Compact, robust magnetic stirrer for temperature-sensitive heating and stirring tasks in the laboratory. An external temperature probe or the temperature controller VTF can be connected for precise thermoregulation of the sample. The temperature and stirring speed can be easily set and monitored via the bright and user-friendly digital display. Suitable for stirring volumes up to 15 litres. The stirring position made of ceramic is resistant to chemicals and scratches, and is easy to clean. The hot indicator signals when the plate temperature is above 50 °C, even if the heating function is not active. The SpeedServo™ torque compensation keeps the speed constant even if the viscosity changes.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm), Pt100 temperature probe
Magnetic stirrer with heating AREC 7 Digital Set, with temperature probe, rod, clamp
Compact, robust magnetic stirrer for temperature-sensitive heating and stirring tasks in the laboratory. An external temperature probe or the temperature controller VTF can be connected for precise thermoregulation of the sample. The temperature and stirring speed can be easily set and monitored via the bright and user-friendly digital display. Suitable for stirring volumes up to 15 litres. The stirring position made of ceramic is resistant to chemicals and scratches, and is easy to clean. The hot indicator signals when the plate temperature is above 50 °C, even if the heating function is not active. The SpeedServo™ torque compensation keeps the speed constant even if the viscosity changes.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm), Pt100 temperature probe, rod, clamp
Magnetic stirrer with heating AREX 5 Advance
The AREX 5 Advance is characterised by precise temperature control, several connection options, advanced functions and improved user-friendliness. The user interface with capacitive buttons and a tempered glass control panel ensures seamless navigation and can be read from any angle. The powerful brushless motor reliably stirs up to 20 l (H2O). Thanks to SpeedServo™ technology, the set speed remains constant even when the viscosity changes. Various stirring modes, such as auto-reverse, intermittent operation and settable speed limits make the AREX 5 Advance extremely versatile. The CerAlTop™ plate ensures fast and uniform heating over the entire surface. If an external sensor is connected, 2 thermoregulation modes can be selected: FAST (fast temperature rise) and FINE (optimised temperature control with minimal overshoot). In addition, up to 9 temperature and speed ramps can be programmed. The integrated timer in countdown or count-up mode enables precise time management. Built-in functions such as the safety lock button, overheating protection and safety circuits ensure safety in the laboratory. The ‘Hot’ warning appears on the display if the plate exceeds 50 °C, even if the heating is switched off. Data can be saved via the USB interface and exported to a PC for further analysis. Stirring and heating curves can be easily visualised on the PC using the ControllerSoft™ software. Alternatively, the AREX 5 Advance can be remotely controlled and monitored in real-time using the VELP Ermes Cloud Platform via PC or mobile devices.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm)
Magnetic stirrer with heating AREX 5 Advance System, with temperature probe
The AREX 5 Advance is characterised by precise temperature control, several connection options, advanced functions and improved user-friendliness. The user interface with capacitive buttons and a tempered glass control panel ensures seamless navigation and can be read from any angle. The powerful brushless motor reliably stirs up to 20 l (H2O). Thanks to SpeedServo™ technology, the set speed remains constant even when the viscosity changes. Various stirring modes, such as auto-reverse, intermittent operation and settable speed limits make the AREX 5 Advance extremely versatile. The CerAlTop™ plate ensures fast and uniform heating over the entire surface. If an external sensor is connected, 2 thermoregulation modes can be selected: FAST (fast temperature rise) and FINE (optimised temperature control with minimal overshoot). In addition, up to 9 temperature and speed ramps can be programmed. The integrated timer in countdown or count-up mode enables precise time management. Built-in functions such as the safety lock button, overheating protection and safety circuits ensure safety in the laboratory. The ‘Hot’ warning appears on the display if the plate exceeds 50 °C, even if the heating is switched off. Data can be saved via the USB interface and exported to a PC for further analysis. Stirring and heating curves can be easily visualised on the PC using the ControllerSoft™ software. Alternatively, the AREX 5 Advance can be remotely controlled and monitored in real-time using the VELP Ermes Cloud Platform via PC or mobile devices.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm), Pt100 temperature probe
Magnetic stirrer with heating AREX 5 Advance System, with temperature probe, rod and clamp
The AREX 5 Advance is characterised by precise temperature control, several connection options, advanced functions and improved user-friendliness. The user interface with capacitive buttons and a tempered glass control panel ensures seamless navigation and can be read from any angle. The powerful brushless motor reliably stirs up to 20 l (H2O). Thanks to SpeedServo™ technology, the set speed remains constant even when the viscosity changes. Various stirring modes, such as auto-reverse, intermittent operation and settable speed limits make the AREX 5 Advance extremely versatile. The CerAlTop™ plate ensures fast and uniform heating over the entire surface. If an external sensor is connected, 2 thermoregulation modes can be selected: FAST (fast temperature rise) and FINE (optimised temperature control with minimal overshoot). In addition, up to 9 temperature and speed ramps can be programmed. The integrated timer in countdown or count-up mode enables precise time management. Built-in functions such as the safety lock button, overheating protection and safety circuits ensure safety in the laboratory. The ‘Hot’ warning appears on the display if the plate exceeds 50 °C, even if the heating is switched off. Data can be saved via the USB interface and exported to a PC for further analysis. Stirring and heating curves can be easily visualised on the PC using the ControllerSoft™ software. Alternatively, the AREX 5 Advance can be remotely controlled and monitored in real-time using the VELP Ermes Cloud Platform via PC or mobile devices.Scope of supply: Magnetic stirrer, magnetic stirring bar (Ø 8 x 40 mm), Pt100 temperature probe, rod, clamp
Magnetic stirrer with heating Guardian™ 2000, with round top plate
Reliable, analogue magnetic stirrer with heating for general heating and stirring applications. Ideal for educational institutions and other laboratory environments.User-friendly rotary knob control for easy operationHot top indicator illuminates when the heating element temperature is above 40 °CWith build-in support rod holderEasy to clean top plateDurable metal housingWith round top plate made of ceramic-coated stainless steel
Magnetic stirrer with heating Guardian™ 2000, with square top plate
Reliable, analogue magnetic stirrer with heating for general heating and stirring applications. Ideal for educational institutions and other laboratory environments.User-friendly rotary knob control for easy operationHot top indicator illuminates when the heating element temperature is above 40 °CWith build-in support rod holderEasy to clean top plateDurable metal housingWith square top plate made of ceramic
Magnetic stirrer with heating LLG-uniSTIRRER 3 pro, complete set
Universal magnetic stirrer with outstanding price-performance ratio.High level of safety thanks to "Hot" display with continuing stirring function until the plate temperature has dropped below 50 °C, even when the device is switched off. Integrated control function for precise control of the media temperature by a connected PT1000 temperature probe.Stainless steel plate with ceramic coatingDigital speed and temperature controlLED display"HOT" display for hot surfaces, even when the device is switched offFixed safety circuit of the hotplate temperature at 320 °CConnection for PT1000 temperature probe, integrated control function. The control accuracy with temperature sensor is ±0.5 °C.Scope of supply: Magnetic stirrer, PT1000 temperature probe, rod, holder
Magnetic stirrer with heating LLG-uniSTIRRER 5 pro, complete set
Universal magnetic stirrer with outstanding price-performance ratio and new, improved design.High level of safety thanks to "Hot" display with continuing stirring function until the plate temperature has dropped below 50 °C, even when the device is switched off. Integrated control function for precise control of the media temperature by a connected PT1000 temperature probe.Digital timer (1 min to 99 h 59 min)Maintenance-free, brushless DC motorStainless steel plate with ceramic coatingSturdy metal housingPowerful stirringDigital control, backlit displayDisplay for hot surfaces, even when the device is switched offFixed safety circuit of the hotplate temperature at 360 °CConnection for PT1000 temperature probe, integrated control function. The control accuracy with temperature sensor is ±0.2 °C.Scope of supply: Magnetic stirrer, PT1000 temperature probe, rod, holder
Magnetic stirrer with heating LLG-uniSTIRRER 7 pro
Universal magnetic stirrer with an outstanding price-performance ratio and new design.High level of safety thanks to "Hot" display with continuing stirring function until the plate temperature has dropped below 50 °C, even when the device is switched off. Integrated control function for precise control of the media temperature by a connected PT1000 temperature probe.Maintenance-free, brushless DC motorStainless steel plate with glass ceramic coatingHeatableSturdy metal housingPowerful stirringDigital control, backlit displayRS232 for stirrer control and display of all parameters via PCDisplay for hot surfaces, even when the device is switched offFixed safety circuit of the hotplate temperature at 580 °CConnection for PT1000 temperature probe, integrated control function. The control accuracy with temperature sensor is ±0.2 °C.Rod can be mounted on the right and left side of the magnetic stirrerScope of supply: Magnetic stirrer, PT1000 temperature probe, rod, holder
Magnetic stirrer with heating, 3-Position, SHP-200-MP
With 3 independently adjustable aluminium hotplates, Overheat protection mechanism and warning light which switches on when the plate temperature exceeds 50°C. With facility for mounting a 12.5mm retort rod at the rear of each plate and 3mm x 25mm PTFE coated followers.With BioCote, silver-based, antimicrobial protection.
Magnetic stirrer with infra-red heating SHP-200-IR-L
Using an ultra-efficient, infra-red heater of just 900 W power this hotplate stirrer will boil 1 litre of water over 30 % faster than a conventional ceramic hotplate of 1200 W. Ideal for heating and stirring large volumes of liquid, particularly microbiological media.Chemically resistant glass ceramic top plateFlashing "Hot" warning light for temperature above 50 °C, mains independentWith BioCote®, silver-based, antimicrobial protection.
Magnetic stirrer, Cimarec Power Direct
Super flat, powerful magnetic stirrer for volumes from 100ml up to 40L, with long-range, magnetic field for stirring over long distances up to max. 40mm, ideal for thick-walled, glass vessels, round bottom flasks or double-walled containers, wash- and abrasion-resistant, stainless steel housing, speed range 100rpm to 2000rpm with feedback control, quick stop within 2 sec., 4-step stirring power adjustment (5W / 10W / 15W / 20W), digital speed display, bi-directional RS232 interface allowing up to 14 units to be directly and individually controlled by the user's PC and 24V d.c. output, a.c. adapter for 100 - 240V. Ambient operating temperature: -10 to +40°C.