Cassettes for multi-channel pump heads Hei-FLOW

Charging carousel 2 Eppendorf

For storing up to 6 Eppendorf Xplorer®/plus models. Up to four instruments can be charged simultaneously. Magnetic contact for quick and easy connection. Includes four interchangeable mains plugs for different countries, 100 - 240 volts, 50/60 Hz.

Charging carousel for Picus and eLINE® electronic micropipettes

For storing and charging electronic pipettes.

Charging cradle 2 Eppendorf

For charging carousel 2, with charging function.

Charging stand 2 Eppendorf

To use with the power supply included in the delivery of the Eppendorf Xplorer® /plus, Multipette® E3/E3x/stream/Xstream.

Charging stand for Picus and eLINE® electronic micropipettes

For storing and charging an electronic pipette.

Charging stands for single channel microliter pipettes Transferpette® electronic

Three pipettes (up to 1000 μl) can be charged simultaneously.

Check flasks, DAkkS calibrated, boro 3.3, class A, with 3 marks, blue graduations

BLAUBRAND®, DIN EN ISO 1042. Calibrated to contain (TC, IN). DAkkS (former DKD) certificate included. The volumetric flask with 3 marks is used to check the functioning of a dispenser. The mark in the middle shows the nominal volume, the upper and lower marks show the error limits as specified in the table below. If the error limit is exceeded even with repeated measurements, the dispenser is defective. The DAkkS-calibrated volumetric flask does not replace the gravimetric test of the monitoring of measuring instruments according to ISO 8655.Other sizes on demand.

Chemically-resistant Diaphragm Dosing Pumps SIMDOS® 02, external control

Application: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small sizeApplication: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small size

Chemically-resistant Diaphragm Dosing Pumps SIMDOS® 02, manual control

Application: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small sizeApplication: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small size

Chemically-resistant Diaphragm Dosing Pumps SIMDOS® 10, external control

Application: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small sizeApplication: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small size

Chemically-resistant Diaphragm Dosing Pumps SIMDOS® 10, manual control

Application: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small sizeApplication: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small size

Chemically-resistant Liquid Pumps LIQUIPORT® NF 1.100, external control

Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 4 barFor tubing ID 8 mm

Chemically-resistant Liquid Pumps LIQUIPORT® NF 1.100, manual control

Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 4 barFor tubing ID 8 mm

Chemically-resistant Liquid Pumps LIQUIPORT® NF 1.300, external control

Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 4 barFor tubing ID 12 mm

Chemically-resistant Liquid Pumps LIQUIPORT® NF 1.300, manual control

Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 4 barFor tubing ID 12 mm

Chemically-resistant Liquid Pumps LIQUIPORT® NF 100, external control

Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 1 barFor tubing ID 8 mm

Chemically-resistant Liquid Pumps LIQUIPORT® NF 100, manual control

Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 1 barFor tubing ID 8 mm

Chemically-resistant Liquid Pumps LIQUIPORT® NF 300, external control

Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 1 barFor tubing ID 12 mm

Chemically-resistant Liquid Pumps LIQUIPORT® NF 300, manual control

Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 1 barFor tubing ID 12 mm

Closure caps, PP, for seripettor® / seripettor® pro

PP cap to close the valve blockAutoclavable

Compact automatic burette, BLAUBRAND®, Boro 3.3, class AS

All BLAUBRAND® automatic burettes are supplied with a batch number and an accompanying batch certificate in the original packaging. On request, they are also available with an individual certificate, USP individual certificate or DAkkS calibration certificate.Fast to dismantle and easy to cleanAll individual components replaceableDE-M markingDIN EN ISO 385Calibrated to deliver (TD, Ex)Scope of supply: Burette tube with automatic zeroing and Schellbach stripe, detachable PTFE stopcock, precision tip, filling tube (PVC, transparent)Please order reservoir bottle, pumphead, rubber bellows, supports and burette clamps separately.

Compact automatic burettes amber with PE-bottle SILBERBRAND

The modular automatic burette concept! Fast to dismantle and easy to clean. Easy to repair - all individual components replaceable! Borosilicate glass 3.3, detachable PTFE stopcock. Calibrated to deliver (TD, EX). 25 ml: Error limit according to class B, DIN EN ISO 385. 50 ml: DIN EN ISO 385, class B.Scope of supply:Burette tube with white graduation and automatic zeroing, stopcock with precision tip, filling tube (PVC, transparent), brown 1000 ml PE-bottle with baseStands, burette clamps and bellows please order separately.

Compact automatic burettes with PE-bottle BLAUBRAND®

The Modular Automatic Burette Concept! Fast to dismantle and easy to clean. Easy to repair - all individual components replaceable! Class AS, DE-M marking, borosilicate glass 3.3, detachable PTFE stopcock. DIN EN ISO 385. Calibrated to deliver (TD, EX). All BLAUBRAND® automatic burettes are supplied with a batch number and an accompanying batch certificate. On request, they are available also with an individual certificate, USP individual certificate or DAkkS calibration certificate.Scope of supply:Burette tube with Schellbach stripe and automatic zeroing, stopcock with precision tip, filling tube (PVC, transparent), 1000 ml PE-bottle with baseStands, burette clamps and bellows please order separately.