Chemically-resistant Liquid Pumps LIQUIPORT® NF 300, external control
Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 1 barFor tubing ID 12 mm
Chemically-resistant Liquid Pumps LIQUIPORT® NF 300, manual control
Application: Transferring liquidsSelf priming, dry running and maintenance freePump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)Operating pressure max. 1 barFor tubing ID 12 mm
Compact peristaltic pumps MS-CA
Simple Click'n'go mini tubing assembly cartridges.3-stop colour-coded tubingFixed-speed motor
Connector nipples for Gear pumps MCP-Z, BVP-Z, Reglo-Z/ZS
Please order 2 tubing connection ferrules which are necessary for pump operation.
Conveying pipes, PE
For OTAL® disposable pump, Ø 12 mm, immersion depth 900 mm.
Disposable foot pumps OTAL®, with PE conveying pipes
Space-saving container pump for single use. The medium to be filled only comes into contact with the conveying pipe. The conveying pipe is made of one piece and can easily be shortened to the respective container height with the supplied cutter for good residual emptying. The disposable conveying pipe can be replaced quickly and easily after use.Scope of supply: Pump ball, universal plug made of soft PVC for container openings of 30 - 70 mm Ø, cutter and 10 disposable conveying pipes
Disposable hand pumps OTAL®, with PE conveying pipes
Space-saving container pump for single use. The medium to be filled only comes into contact with the conveying pipe. The conveying pipe is made of one piece and can easily be shortened to the respective container height with the supplied cutter for good residual emptying. The disposable conveying pipe can be replaced quickly and easily after use.Scope of supply: Pump ball, universal plug made of soft PVC for container openings of 30 - 70 mm Ø, cutter and 10 disposable conveying pipes
Double diaphragm pump DMP 1/4" PPB
Oil-free compressed air pumps for small systems or in the laboratory area.High hydraulic performanceSelf-priming (even when dry)Maintenance-optimized design and easy installationNon-stalling operationHighly resistant NBR diaphragm. Housing made of PP, glass fibre reinforced.
Double diaphragm pumps DMP 1/4" KNT
Oil-free compressed air pumps for small systems or in the laboratory area.High hydraulic performanceSelf-priming (even when dry)Maintenance-optimized design and easy installationNon-stalling operationHighly resistant diaphragm made of TPV (EPDM-PP) and TFM (PTFE). Housing made of PVDF, carbon fiber reinforced.
Double diaphragm pumps DMP 1/4" KNTC Ex
Oil-free compressed air pumps for small systems or in the laboratory area.High hydraulic performanceSelf-priming (even when dry)Maintenance-optimized design and easy installationNon-stalling operationHighly resistant diaphragm made of TPV (EPDM-PP) and TFM (PTFE). Conductive version approved according to ATEX directive 2014/34/EU, category 4. Housing made of PVDF, carbon fiber reinforced.
Double diaphragm pumps DMP 1/4" PPT
Oil-free compressed air pumps for small systems or in the laboratory area.High hydraulic performanceSelf-priming (even when dry)Maintenance-optimized design and easy installationNon-stalling operationReinforced elastomers and highly resistant thermoplastic diaphragm made of TPC-ET and TFM (PTFE). Housing made of PP, glass fibre reinforced.
Drum holder, stainless steel
The storage area of the drum holder can be adjusted for height and provides a place for setting down the filling container directly under the discharge of drum pumps. A scale with container can also be placed on the storage area so the liquid that is being dispensed can be measured accurately. The holder can be used for pumps with discharge tube and discharge hose.For drums with 60 to 220 lSize storage area: 240 x 240 mmLoad capacity: 10 kg
Drum pump Pump-it®
For rapid and clean emptying from cans, drums and small barrels up to 60 l.Medium-contacting parts made of PP, PE and FKMPrecise dosing, without drippingPump connection suitable for 64 mm dia. (BSI) container threadsStepless length adjustment of immersion tubeThreaded adapters for most commercially-sold containers availableNot suitable for HCl
Drum pump PumpMaster, for acids and chemical liquids
The manual pressure pump is ideally suited for drawing off, decanting and emptying canisters and barrels. The hand pump is used to create excess pressure that forces the liquid out of the container. The stopcock also allows extraction of small quantities of liquid. The PumpMaster container pump is mounted on the container using a flexible stopper with a variable and adjustable diameter. No special thread adapters are required. PumpMaster fits all commercial container openings with a diameter from 46.5 mm to 60 mm. The immersion tube has a length of 95 cm and it can be shortened depending on the size of the container.Green. FKM gasket.Scope of supply: Drum pump, three bungs in different sizes
Drum pump PumpMaster, for aqueous liquids
The manual pressure pump is ideally suited for drawing off, decanting and emptying canisters and barrels. The hand pump is used to create excess pressure that forces the liquid out of the container. The stopcock also allows extraction of small quantities of liquid. The PumpMaster container pump is mounted on the container using a flexible stopper with a variable and adjustable diameter. No special thread adapters are required. PumpMaster fits all commercial container openings with a diameter from 46.5 mm to 60 mm. The immersion tube has a length of 95 cm and it can be shortened depending on the size of the container.Red. EPDM gasket.Scope of supply: Drum pump, three bungs in different sizes
Drum pump PumpMaster, for petrochemical liquids
The manual pressure pump is ideally suited for drawing off, decanting and emptying canisters and barrels. The hand pump is used to create excess pressure that forces the liquid out of the container. The stopcock also allows extraction of small quantities of liquid. The PumpMaster container pump is mounted on the container using a flexible stopper with a variable and adjustable diameter. No special thread adapters are required. PumpMaster fits all commercial container openings with a diameter from 46.5 mm to 60 mm. The immersion tube has a length of 95 cm and it can be shortened depending on the size of the container.Blue grey. NBR gasket.Scope of supply: Drum pump, three bungs in different sizes
Drum pump set "alkalis", mains-powered
For safe handling of environmentally hazardous and aggressive liquids as well as inflammable and explosive fluids.For low-viscosity alkali solutions such as sodium chloride, Potassium hydrate, ammonia, formic acid and acetic acid.Supplied with: Pump, 2.0m PVC tubing (DN19 fitting), PP nozzle and barrel adapter
Drum pump set "acids", mains-powered
For safe handling of environmentally hazardous and aggressive liquids as well as inflammable and explosive fluids.For low-viscosity acids such as hydrochloric, phosphoric, chromic, citric acids and battery acid.Supplied with: Pump, 2.0m PVC tubing (DN19 fitting), PP nozzle and barrel adapter
Drum pump set "mineral oils", mains-powered
For safe handling of environmentally hazardous and aggressive liquids as well as inflammable and explosive fluids.For low-viscosity mineral oil products such as Diesel, fuel, hydraulic, machinery and motor oils.Supplied with: Pump, 2.0m PVC tubing (DN25 fitting), aluminium nozzle and PP barrel adapter
Drum pump set "solvents", explosion-proof version, mains-powered
For safe handling of environmentally hazardous and aggressive liquids as well as inflammable and explosive fluids.For easily flammable hydrocarbons such as ethanol, gasoline, butanol, isopropanol, kerosene, methanol and petroleum.Supplied with: Pump, 2.0m solvent-resistant tubing (DN19 fitting), brass conductive tubing coupling and nozzle, earthing strap and PP barrel adapter
Drum pump sets B2 Vario, mains-powered, PP
Lightweight and powerful pump for transferring small amounts of aqueous liquids up to 300 mPas from cans and drums with infinitely variable speed controller.Motor 230 V, 200 W (IP 24)Seal less pump tubeSuitable accessory flow meter requiredPump with tubing connectionPolypropylene version for acids and alkalis.Scope of supply: Motor B2 Vario, pump tube, PVC spiral hose (1.5 m), hose connectors, hose clamps, Lutz nozzle, wall bracket
Drum pump sets B2 Vario, mains-powered, stainless steel
Lightweight and powerful pump for transferring small amounts of aqueous liquids up to 300 mPas from cans and drums with infinitely variable speed controller.Motor 230 V, 200 W (IP 24)Seal less pump tubeSuitable accessory flow meter requiredPump with tubing connectionStainless steel version for low-viscosity lubricants.Scope of supply: Motor B2 Vario, pump tube, PVC spiral hose (1.5 m), hose connectors, hose clamps, Lutz nozzle, wall bracket
Drum pumps "acids", mains-powered
For safe handling of environmentally hazardous and aggressive liquids as well as inflammable and explosive fluids.For low-viscosity acids such as hydrochloric, phosphoric, chromic, citric acids and battery acid.Supplied with: 230V motor, 5m cable and plug, pump tube and tubing connection
Drum pumps "alkalis", mains-powered
For safe handling of environmentally hazardous and aggressive liquids as well as inflammable and explosive fluids.For low-viscosity alkali solutions such as sodium chloride, Potassium hydrate, ammonia, formic acid and acetic acid.Supplied with: 230V motor, 5m cable and plug, pump tube and tubing connection.
Drum pumps "mineral oils", mains-powered
For safe handling of environmentally hazardous and aggressive liquids as well as inflammable and explosive fluids.For low-viscosity mineral oil products such as Diesel, fuel, hydraulic, machinery and motor oils.Supplied with: 230V motor, 5m cable and plug, pump tube and tubing connection.
Drum pumps B2 Vario, mains-powered, PP
Lightweight and powerful pump for transferring small amounts of aqueous liquids up to 300 mPas from cans and drums with infinitely variable speed controller.Motor 230 V, 200 W (IP 24)Seal less pump tubeSuitable accessory flow meter requiredPump with tubing connectionPolypropylene version for acids and alkalis.Scope of supply: Motor B2 Vario, pump tube, hose connectors
Drum pumps B2 Vario, mains-powered, PVDF
Lightweight and powerful pump for transferring small amounts of aqueous liquids up to 300 mPas from cans and drums with infinitely variable speed controller.Motor 230 V, 200 W (IP 24)Seal less pump tubeSuitable accessory flow meter requiredPump with tubing connectionSuitable for Naphthalin, Natriumhypochlorit, Nitric acid, Perchloric acid.Scope of supply: Motor B2 Vario, pump tube, hose connectors
Drum pumps B2 Vario, mains-powered, stainless steel
Lightweight and powerful pump for transferring small amounts of aqueous liquids up to 300 mPas from cans and drums with infinitely variable speed controller.Motor 230 V, 200 W (IP 24)Seal less pump tubeSuitable accessory flow meter requiredPump with tubing connectionStainless steel version for low-viscosity lubricants.Scope of supply: Motor B2 Vario, pump tube, hose connectors
Drum pumps GLP 25
GLP 25 is your ideal helper for clean and safe liquid transfer from small containers and drums up to 220 litres. Various media such as acids and bases low concentrated, dies, emulsions, dispersions and low-viscosity liquids can be measured out without any problems. Wetted materials are PP, stainless steel and Viton®. The pump is therefore additionally media resistant against aggressive liquids. Driveshaft made from stainless steel. Delivery rates from 1 to 20 l/min adjustable. Pump Set supplied with: motor, pump unit, PP, ¾" dia. inlet tubing (length 500, 700 or 1000mm), PP discharge tubing, 250mm long and adapter for drum necks of 40 to 58mm.
Drum pumps, "solvents", explosion-proof version, mains-powered
For safe handling of environmentally hazardous and aggressive liquids as well as inflammable and explosive fluids.For easily flammable hydrocarbons such as ethanol, gasoline, butanol, isopropanol, kerosene, methanol and petroleum.Supplied with: 230V motor, 5m cable and plug, pump tube and tubing connection, earthing strap
Flow Indicator with ball, SAN
For liquid flow from 50 ml/min in horizontal position, and 140 ml/min in vertical position. Minimum air flow 3 l/min horizontal and 8 l/min vertical. Speed of rotation of ball proportional to flow. Not to be used with corrosive fluids or over +50 °C.
Flow Indicator with paddle wheel, SAN
For liquid flows down to 5 ml/sec. Wheel spins freely and speed of rotation is proportional to flow rate. Maximum recommended flow rate up to 95 ml/sec, max 2 bar pressure. Not to be used with corrosive fluids or over +85 °C. Can be used with gases.
Flow meter TR3
Can be combined with all drum and container pumps. For thin-bodied fluids.Measurement according to the turbine wheel principleFree-rotatable after assemblyVariable display alignmentLarge illuminated displaySimultaneous display of subset (4-digit) and total quantity (7-digit)Display of the partial and total volumeCustomary 1.5 V batteries (AAA)
Foot pumps OTAL®, battery-pumps
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeWith delivery tubes made of PP/PVCFor safe filling of car batteries with acid or distilled waterWith tube shutoff valveWith dosing tip for precise filling
Foot pumps OTAL®, PP
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PPUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor weak acids, alkalis and detergents
Foot pumps OTAL®, PP, with tube and stopcock
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PPUniversal bungs made of soft PVC, for container openings of 30 – 70 mm1.5 m discharge tube, PVCStopcock made of PP/PE (Ø 10 mm)