Gas burner powerjet
Mobile handheld laboratory gas burner with piezoelectric ignition for liquid gas cartridges. Suitable for flame sterilisations in the microbiological or biotechnical field, where no central gas supply is available.For gas cartridges with 7/16" x 28 UNEF thread, e.g. CG1750Ignition at keystrokeSize of the flame infinitely adjustable Gas supply only when bar is pressed With a locking device for long term flamingSafe handling due to one-handed operationScope of supply: Laboratory gas burner with gas cartridge adapter (7/16" x 28 UNEF thread)
Gas Burner Powerjet 2
The mobile handheld laboratory gas burner with piezoelectrical ignition for natural gas, propane / butane gas. For all flame sterilization work in the microbiology or biotechnical fields.Ignition at keystrokeSize of the flame infinitely adjustableGas supply only when bar is pressedThe flame can be regulated in sizeWith a locking device for long term flamingConnection for gas cartridge or gas tubingSafe handling due to one-handed operationScope of supply: Gas burner, adapter for gas cartridges CV 360, tubing connector with swivel nut, stainless steel stand, nozzle for natural gas (08), nozzle for propane / butane gas (06), nozzle-box spanner, wrenches (14 / 17 mm) and instruction manual
Gas cartridges
C 206 GLS pierceable cartridgePiercing cartridge with integrated gas lock system according to EN 417: 2012. For bunsen burner without safety valve. For bunsen burners Labogaz® 206 and Soudogaz blow torches.CV470 Plus and CV 300 Plus valve cartridgeWith safety valve. For bunsen burner Labogaz® 470.CV 360 valve cartridgeWith safety valve. For gas-safety burner schuett phoenix (Cat.-No. 9.018 761).Safety valve allows removal of partially used valve gas cartidges.
Gas safety adapters
For gasprofi 1 SCS micro / Fuego SCS / Flame100.Scope of supply:Integrated pressure regulator 50 mbar, DVGW tubing (0.5 m)
General Purpose Homogenisers, Borosilicate glass
Precision Bore Borosilicate glass mortars with a range from 5.0 to 55ml capacityBorosilicate glass pestleAll parts are fully autoclavableGrinding Clearance Pestle and Mortar: 0.152 to 0.254mm
Glass caps, DURAN®
Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.
Glass mortar for dounce homogenizers
Suitable if the nuclei are to be maintained after homogenising.
Hand tally counter
Use for counting blood cells, bacterial colonies, drops of liquid, or any repetitive event. Tallies up to 9999. Features a quick-reset knob, lens window for easy reading, and finger ring for a secure grip. Sturdy, chrome-finished, metal housing.Dimensions: 46mm diameter x 41mm W.
Homogeniser drive unit, schuett homgenplus
Potter Elvehjem & Dounce. Safe homogenisation without much effort, for gentle digestion of biological samples and tough, difficult to homogenize material, so that a high proportion of intact cell nuclei can be isolated.Large stability, vibration-free due to robust 3-fold stand construction4-digit display for reproducible homogenisationEasy handlingSteplessly adjustable, electronic speed control from 40 - 3000 min-1 High torque drive, powerful even at low speedsFlexible useLarge selection of conical and cylindrical homogenizers and pestle (PTFE, glass and also glass fibre reinforced)Tubes with volumes from 1.5 to 40 ml and outer diameters from 10 to 40 mm can be usedUse of Eppendorf® microreaction vessels with 1.5 ml possibleChuck with hollow shaft for quick and easy pestle change and the use of different shaft lengths and diametersFor optimum cooling, the cooling vessel can be filled with ice or ice waterSupplied with: schuett homgenplus homogeniser drive unit with universal keyless chuck, incl. cooling vessel, 1000 ml and universal chuck set (consisting of 6 sizes).We also offer a sterile alternative for use in a glove box and with infectious material. Details on request.
Homogenisers DUALL®, with glass pestle
With conical and cylindrical area for effective tissue for grinding and also for homogenising. Especially suitable for cellular tissue such as muscle, heart and lungs. The pestle is sufficiently stable to be motor driven. The space between the pestle and mortar is between 0.1mm to 0.15mm. Spare components are available and are completely interchangeable.
Homogenisers DUALL®, with PTFE pestle
With conical and cylindrical area for effective tissue for homogenising. The PTFE pestle is ideal for soft tissue such as brain or liver. The pestle is suitable for motor drive. The space between the pestle and mortar is between 0.1mm to 0.15mm. Spare components are available and are completely interchangeable.
Homogenisers Potter-Elvehjem, with glass pestle
All-glass. Pestle is suitable for motor drive. The space between the pestle and mortar is between 0.1mm to 0.15mm. Spare components are available and are completely interchangeable.
Homogenisers Potter-Elvehjem, with PTFE pestle
With PTFE pestle and glass mortar. Sizes 21 and 24 have notches on the bottom edge of the pestle so that particles can be transported up to the cylindrical part of the mortar for extraction. The space between the pestle and mortar is between 0.1mm to 0.15mm. Spare components are available and are completely interchangeable.
Homogenisers with PTFE or glass pestles
For use with all homogeniser drive-units or for schuett homgenplus.Homogenisers and pestles provide a precise shape and are consequently separately exchangeable. Clearance between pestle and homogeniser is between 0.18 and 0.23 mm.Homogeniser with PTFE pestleTapered or cylindrical. Shaft made of stainless steel. Inert. Elastic. With smooth, wax-like, moisture-rejecting surface. Resistant against high temperatures. Also available as glass fiber reinforced model. Highly efficient with especially tough tissue.Homogeniser with glass pestleTapered or cylindrical. With robust glass shaft. Ground-glass surface in cylindrical/tapered part. Highly efficient with tough tissue.Homogenizers and pestles also available individually as spare parts.Glass mortar Type 1:With flared overflow neck and spout, conicalGlass mortar Type 2:Without flared overflow neck, cylindricalGlass mortar Type 3:With flared overflow neck and spout, cylindricalGlass mortar Type 4:Round bottom, with flared overflow neck, without spout, cylindrical*glass-fibre reinforced
Homogenisers, Dounce, glass
For fine particle size reductions without damage to cell nuclei. Supplied with interchangeable pestles ground and polished to large' and small' clearances for use in the same tube. Includes 2 larges pestle used for sample preparation and 2 tight pestles for final homogenate.
Homogenisers, Duo-Form, Borosilicate glass 3.3
The pestles are conicaly shaped at the tip and cylindrically shaped in the upper part. This combination gives two separate areas, one for initial grinding and a second for final homogenisation.
Homogenisers, Griffiths tube, Borosilicate glass 3.3
For grinding bacterial emulsions and tissues. Rounded pestle and mortar ends, ensure perfect grinding. Autoclavable. Large Griffiths tube is ideal for coarse material.
Homogenisers, Mini series, borosilicate glass 3.3
Manufactured from high quality borosilicate glass this range of mini homogenisers is ideal for micro tissue work. Bodies are clear precision glass. Pestles have ground glass working length. With or without handles. Fully autoclavable.Grinding clearance pestle and mortar 0.152mm to 0.254mm.
Homogenisers, Round Body, glass
The all-glass Uni-Form range of round body tissue grinders is made from sterilisable heat-resisting glass in capacities 5ml to 55ml. Models are available with rod ends for motor drive, or hollow pestles designed for use with coolants/dry ice. Bodies are available in clear precision glass or ground glass for more effective homogenisation of tougher tissues.Grinding clearance pestle and mortar 0.152mm to 0.254mm.
Homogenisers, Safe-Seal, borosilicate glass 3.3/PTFE
Supplied complete with a PTFE pestle, stainless steel handle and borosilicate glass mortar which is stoppered in PTFE to protect against splash back during the grinding process. Autoclavable.
Incubator Lovibond® DI 10
For fast and reliable incubation of dipslides in the laboratory or in the field directly during sampling.Low voltage, in-car operation possibleHolds up to 12 dipslides or 10 quanti-discsExcellent temperature stabilityProgrammable incubation period settingLCD Temperature display with up/down push button controlRapid heating times for fast testingExternal status LEDsScope of supply: Incubator incl. external 12 V universal power supply, set of leads (UK, EU, US), 12 V in-car power adapter
Inoculating loops, PS
Radiation-sterilised. Semi-quantitative standard for sample handling, e.g. for diseases of the urinary tract. Surface treated to increase drop adhesion. Reduced contamination risks as product is disposable and does not require flaming.Other colours on request
Inoculating needles smartPicks®, wood
Available in three lengths and two needle sizes to suit a wide range of application needs. The Mini fits neatly into a 1.5 mL microfuge tube allowing the lid to be closed for full sample transfer/recovery.Naturally biodegradable White Birch woodManufactured in an FDA-registered factory and complies with FDA standards for food contactAutoclavable and available in semi or needle point styles for delicate operations
Inoculating needles, PS
Radiation-sterilised. Semi-quantitative standard for sample handling, e.g. for diseases of the urinary tract. Surface treated to increase drop adhesion. Reduced contamination risks as product is disposable and does not require flaming.Other colours on request
Inoculating Turntable
Manually operated turntable guarantees smooth and easy rotation in both directions. Also enables easy and fast allocation of bacteria across petri dish surface. Double-sided construction accomodates petri dishes from 60 to 150 mm diameter by inverting the turntable. Ball bearings provide smooth and effortless spinning, ensuring rapid inoculation steps and extended operation life. Light weight but robust body manufactured from aluminum with non-skid footprint. The silicone pad holds the petri dishes firmly and always keeps the dish centered during inoculation steps. The non-skid pad can easily be removed for fast and efficient cleaning.
Inoculation loop holder
Inoculation loop holder according to Kolle for 0.3 to 0.7 mm wire diameter. Stainless steel with handle. Fixed by union nut.
Inoculation loop stands
Inoculation loop stand robust and sturdy made of plastic (autoclavable). Accomodate up to 6 inoculation loop holders at any one time.
Inoculation loops
Inoculation loops made from stainless steel, special stainless steel wire or platinum-iridium wire (90/10). Can be heated to red heat. Length: 60 mm. Wire diameter: 0.5 mm.
Inoculation loops, platinum-iridium, fused into glass rod
Platinum-iridium wire 90/10.0.5mm thick.
Inoculation loops, PS, loop/loop
The material is of a very high flexibility and guarantees a careful application without injuring the breeding ground-surface. Sterile by gamma irradiation. 1 + 10 µl.