Special flat stainless steel cover for Water baths WTB
Special flat stainless steel cover with openings and concentric ring sets (only in combination with Peltier-cooling device CDP115/ CDP115X2)
Special stainless steel gable cover for Water baths WTB
Special stainless steel gable cover (only in combination with CDP115/ CDP115X2/ CPM650/ SV1524/ SV1524X2/ SV3550/ SV3550X2)
Spring clamps for Erlenmeyer flasks
The spring clamps can be used to securely fasten Erlenmeyer flasks to the base tray. In combination with the separately available base tray, suitable for tempering tasks in a shaking water bath.
Stabilising Solution for Water Baths ThermoClean DC
Plastic bottle containing 100 ml concentrate for 100L water.Suitable for all kinds of thermostats and circulation pumps made of metal, glass or any plasticsCan also be used for closed temperature control systems, e.g. pH blood gas analyserPrevents algae and bacterial growth, no odour formationNo obstructions in tubings and temperature control systemFrequent cleaning of the tank is unnecessarySolution is without aggressive phosphates and oxidising or reducing substancesOnly insignificant pH value change of the waterSolvent-freePrevents foam formation, even with strong circulationApplication: Take 1 ml of the solution for 1L of distilled water (Clean the tank before use!)Use biocides safely. Always read the labelling and the product information before use.
Stacking adapters for CO2 incubators CB series
Suitable for thermally isolated stacking of two CO2 incubators.
Stacking frames for CO2 incubators CB series
Stable, vibration-free stacking frame on casters with stop brake for safe stacking of two CO2 incubators.
Stacking kits for Ovens and Incubators Heratherm™
For stacking devices on top of each other. Recommended when performing decontamination cycles in the lower unit.
Standard heating mantles series KM-G
LabHEAT®-Heating mantles for flasks, round bottom. Flexible glass yarn heating element, outer jacket in glass silk, with diam. 60 mm bottom out-let from 500 ml, max. heating element temperature 450 °C, 1.5 m power supply (earthed) cable with heating-zone switch and RCD (residual current detection).
Standard heating mantles series KM-GF
LabHEAT®-Heating cover for reaction vessels. Flexible glass yarn heating element, outer jacket in glass silk, with Ø 60 mm bottom outlet from 500 ml, max. heating element temperature 450 °C, 1.5 m power supply (earthed) cable with heating-zone and RCD (residual current detection.
Standard heating mantles series KM-GH
LabHEAT®-Heating mantles for flasks, round bottom. Designed identical to series KM-G, but the heating element is made of heat-resistant quartz yarn and permits a maximum temperature up to 900 °C; 1.5 m power supply (earthed) cable with heating-zone switch and RCD (residual current detection).
Steam baths Hydro
With their stable, low-wear mechanics, the Hydro steam baths ensure particularly quiet operation and reliable continuous operation. For gentle evaporation work from columns, Erlenmeyer flasks, beakers, with 1, 4, 6 or 8 openings. With their precise temperature distribution, they are designed for the needs of biological, medical or biochemical laboratories.With »GFL Technology« for the highest quality, reliability and durabilityWater level regulator as standardRemovable perforated lid made of heat-resistant plasticH 11 V and H 19 V completely made of stainless steel, suitable for the evaporation of aggressive media
Steriliser SFplus
Safer than disinfection, hot-air sterilisation of containers and instruments.The safety feature for this hot air steriliser: Setpoint Wait. This means that the programme for sterilisation only starts when the set temperature has been reached. This feature can also be used with freely positionable Pt100 temperature sensors. Here the sterilisation time only begins when the set temperature has been reached at all measurement points, and reliable sterilisation is guaranteed at all times.Textured stainless steel housing, rear of zinc-plated steel, intuitively operated TwinDISPLAY(TFT colour display) with touchscreenYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.comAvailable parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertimeTwo Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an errorAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB portControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID functionDisplaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online loggingMultiple overtemperature protection: Electronic temperature monitoring TWW/TWB and mechanical temperature limiter TB acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN / MAX values for over/undertemperature alarm
Stirring heating mantles LabHEAT® KM-MER series
LabHEAT® - Heating mantles for flasks, round bottom. Designed and technical identical to series KM-ME, but in addition equipped with a magnetic stirrer; rotational frequency up to 1600 rpm max. heating element temperature 450 °C, 1.5 m power supply (earthed) cable and RCD (residual current detection).
Support basket for Water baths WTB
Support basket with perforated mounting shelf (stainless steel) with grid perforations to take clips for conical flasks (use of test tube racks not possible)
Support clamp KM-SK
LabHEAT®-Accessories for metal-cased heating mantles and serial heating unit to fix support rods up to diameter 12 mm or to integrate the metal-cased heating mantles within support wall.
Support stand for Ovens and Incubators Heratherm™
With casters. Height including casters 187 mm.
Temperature controllers, TEMPAT®-D
For controlling temperature of heating coils, hotplates, ovens, infrared radiators and water baths. TEMPAT®-D has a 10mm high, LED display which can even be seen in dark rooms and allows monitoring of actual temperature at any time. Set point can be entered via a 3 or 4 figure coding switch with 1°C resolution. Built-in sensor breakdown fuse, switching interval display and Xp trimmer to adjust variable gain amplification between 0 and 10K. Sensor connection is via a plug-in socket.Appropriate temperature sensor please order separately.If no temperature sensor is ordered, a loose plug is supplied.SpecificationsInput: Switching capacity:230V, 50/60Hz 2300W, 10AConnection, appliance:1.20M long connection cable with impact resistant plugConsumer load:earthed schuko socket, other plug-in connections in accordance with Swiss or French/Belgian standards, for example can be supplied at additional cost.Housing: Dimensions:Polycarbonate plastic, gray 188mm x 110mm x 70mmOn/off switch:via dipole luminous rocker switchProbe connection:via socketContact assignment Pt100:1 and 2Contact load:1 + 3Accuracy:±1% from measuring range value
Temperature controllers, TEMPAT®-DSI
Safety temperature controllers for regulating the temperature of heating coils, hotplates, ovens, infrared radiators and water baths with 7mm high LED display. A coding switch is provided for entering set points. For optimum safety: Irreversible safety contact breaker with secondary sensor input and dipole switch-off in the event of overtemperature or sensor malfunction. Visual and audible alarms. Critical temperature values are set using potentiometer and controlled via the display.Appropriate temperature sensor please order separately.For each operating two sensors per thermostat is required. Please order separately.Specifications Voltage: 220-235V, 50/60HzSwitching capacity:max. 1800VASwitching current:max. 8 AMeasuring accuracy:±1%Dimensions:188mm x 110mm x 70mmWeight:1.1kg
Temperature Probe Kit for Dry Block Heaters
Enables the unit to read actual block or sample temperature and display that temperature on the control panel. The optional External Temperature Probe Kit includes a stainless steel RTD PT100 probe, 457 mm stainless steel support rod, thermometer/temperature probe extension clamp and hook connector. The PT100 RTD probe is designed to fit perfectly in to the thermometer well of each modular block.
Temperature sensors for Laboratory regulator series KM-RX
LabHEAT®-sensors. Suitable for temperature control and KM-KM-RX1001 RX1004 with permanently attached cable, with or without diode plug.KM-TP2: Pt100, up to 400 °C, sheated element V2A, dia. 4 x 50 mm,KM-TPG: Pt100, up to 250 °C, glass tube, dia. 6 x 40 0mm,KM-TNS: NiCr-Ni, up to 1200 °C, rod sensor in Inconell, dia. 1.5 x 300 mmKM-TNF: NiCr-Ni, up to 400 °C, flat sensor, 0.4 x 15 x 400 mmFurther models available on request.
Temperature Test chamber TTC256
Simulate the perfect atmosphere for climate and temperature tests, specifically in accordance with DIN EN 60068-2-1, 2-2 and 2-3. Provide unlimited flexibility for controlled material and function tests as well as ageing tests.Ventilation and Control: high-performance air fan in working chamberdepending on operation status automatically variable fan speed with manual adjustment from 10 % to 100 %adaptive, fuzzy-supported multifunctional digital microprocessor PID-controllerautodiagnostic system with fault indication on temperature control2 x Class A, 4-wire circuit, Pt100 sensors, mutually monitoring and maintaining performance at the same temperature valuedigital 7-day-programme-timer with real time clock, precise minute settingintegral timer for heating profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hoursdigital display (LED) of all set parameters, such as temperature, weekdays, time, humidity and set-up values - language to be chosen in setupdigital display of set values (resolution: 0.1 °C below 99.9 °C, 0.5 °C above 100 °C) and actual values (resolution: 0.1 °C) of temperature (LED)long-term documenting (ring store) of all relevant data, GLP-conforming as data logger - 1024 kBprogramme stored on power failureparallel printer interface (incl. real-time clock with date function) for all PCL3-compatible ink-jet printers for GLP-conforming documentationUSB interface including Memmert "Celsius" software for programming and documentationchip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)incl. works calibration certificate for -20 °C and 160 °CHeating concept: high-performance ring heaters with optimised air circulationdoor heating to avoid condensateCooling Concept:twin compressorspeed adjustable condenser fanrefrigerant R449AMultiple Overtemperature Protection:with audible and visual alarm in case of over-/undertemperature and open doorindependently working, digitally adjustable electronic overtemperature controller, TWW protection class 3.3additional adjustable Auto-Safety-Function "ASF" for over- and undertemperature automatically following the set value at a preset tolerance rangemechanical temperature limiter TB class 1 switching the heating off at approx.10 °C above max. oven temperature
Test tube racks for shaking incubators MaxQ/Solaris™ and orbital shakers Solaris™
Test tube racks with adjustable inclination angle.
Test tube racks for shaking water bath
Stainless steel, 200 x 75 mm. The OLS 26 holds up to 5 SR racks, LSB12 holds up to 3 SR racks and LSB18 holds up to 5 SR racks.
Test tube racks for shaking water baths SW, stainless steel
Test tube racks made of stainless steel. In combination with the separately available base tray, suitable for tempering test tubes in shaking water baths.
Test tube racks for water baths PURA™, shaking water baths SW and heating circulators CORIO™
Test tube racks made of plastic.Suitable for heating thermostats CORIO™ C and CD with the bath types B13, B17, B19, BT19, B27, BT27, B33.