Microbiological incubators Heratherm™ General Protocol
Thermo Scientific™ Heratherm™ General Protocol incubators have been designed for routine applications in pharmaceutical, medical, food and research laboratories. Gravity convection provides gentle air flow and minimal drying out.Corrosion resistant stainless steel chamber (1.4016)Intuitive user interface for easy temperature settingLarge vacuum fluorescent display for easy readingSafe view of samples through internal glass door, without impact on temperatureAutomatic overtemperature alarmEasy to clean interior with rounded cornersEfficient small footprint to optimize benchtop spaceEfficient utilization of interior with flexible shelf systemTabletop models conveniently stackable without the need for tools or stacking kitsLockable casters for easy mobility and stability (floor models only)
Microbiological rapid tests Dual agar Lovibond® Dipslides
The Lovibond® Dipslides are designed to test liquids as well as surfaces. They are ideal for use in many applications including evaporative cooling towers, closed water circuits, cutting fluids, food testing, and many more.These dual-sided Dipslides are available in a wide range of different media types.
Microplate incubator INC-200D-M
A dedicated microtitration plate incubator, working volume 20 litres. Up to 48 x 96-well plates can be held, evenly distributed onto four pull-out stainless steel shelves, one or two layers deep. Precise, even temperature control is maintained throughout the chamber by forced circulation of preheated air from one side to the other across the plates. When filled with 24 x 96-well plates evenly distributed and at a temperature setting of +37°C, variation of temperature between shelves is maintained to within ±0.5°C and fluctuation to within ±0.5°C. A removable stainless steel tray in the chamber base may be filled with water to increase humidity. The 10mm clear acrylic door opens upwards. For 230V 50Hz single phase supplies, 280W.With BioCote, silver-based, antimicrobial protection.
Mini Incubator, with Mini LabRoller™ and rotisseries
Compact incubator is suitable for microbiological and haematological applications, such as cultivation of Petri dishes, microtitre plates, and other small-volume vessels.Interior volume of 9.2 lDoor with large windowCable port on the backPort for a thermometer on the topAnalogue control2 shelf levelsThe incubator is supplied with Mini LabRoller™ and rotisseries for 1.5 ml, 15 ml, and 50 ml tubes.
Mini Incubator, with shelf
Compact incubator is suitable for microbiological and haematological applications, such as cultivation of Petri dishes, microtitre plates, and other small-volume vessels.Interior volume of 9.2 lDoor with large windowCable port on the backPort for a thermometer on the topAnalogue control2 shelf levelsThe incubator is supplied with one shelf.
Mini-Incubator CULTURA® M, with Multirack
The CULTURA® M Mini-Incubator has specifically been designed for the incubation of contact slides and dipslides, as well as common Petri dishes for detecting bacteria, fungi, and yeasts. With its extremely small footprint, it can easily be transported wherever you need to use it. The CULTURA® M incubator has an internal capacity of approximately 4 l. It is used in the areas of medical diagnostics and water analytics. The transparent door allows monitoring of the interior without opening the incubator.Supplied with one Multirack for the incubation of up to 18 dipslides and a thermometer.
Mini-Incubator CULTURA® M, with Multirack and LLG-Min/Max Digital-Thermometer
The CULTURA® M Mini-Incubator has specifically been designed for the incubation of contact slides and dipslides, as well as common Petri dishes for detecting bacteria, fungi, and yeasts. With its extremely small footprint, it can easily be transported wherever you need to use it. The CULTURA® M incubator has an internal capacity of approximately 4 l. It is used in the areas of medical diagnostics and water analytics. The transparent door allows monitoring of the interior without opening the incubator.Supplied with one Multirack for the incubation of up to 18 dipslides, one shelf, and one thermometer.Supplied with a free LLG-Min/Max Digital-Thermometer with outdoor sensor.
Mini-Incubator CULTURA® M, with shelf
The CULTURA® M Mini-Incubator has specifically been designed for the incubation of contact slides and dipslides, as well as common Petri dishes for detecting bacteria, fungi, and yeasts. With its extremely small footprint, it can easily be transported wherever you need to use it. The CULTURA® M incubator has an internal capacity of approximately 4 l. It is used in the areas of medical diagnostics and water analytics. The transparent door allows monitoring of the interior without opening the incubator.Supplied with one shelf and one thermometer.
Mini-Incubator Heratherm™ Compact IMC 18
The most compact unit of the Heratherm™ microbiological incubator family has an 18 l capacity, ideal for personalized workspace.Minimal footprint for space restricted lab areasTemperatures at or below ambientHigh temperature accuracyInternal light facilitates sample observationThe most compact unit of the Heratherm™ microbiological incubator family has an 18 l capacity, ideal for personalized workspace.Minimal footprint for space restricted lab areasTemperatures at or below ambientHigh temperature accuracyInternal light facilitates sample observation
Mini-Incubator Heratherm™ Compact IMC 18, with darkened windscreen
The most compact unit of the Heratherm™ microbiological incubator family has an 18 l capacity, ideal for personalized workspace.Minimal footprint for space restricted lab areasTemperatures at or below ambientHigh temperature accuracyInternal light facilitates sample observationMini-Incubator with darkened windscreen
Multirack for Mini-Incubator CULTURA® M, ABS
With the practical Multirack, up to 18 imprint tests (Ø 25 to 30 mm) can be incubated in the CULTURA® M Mini-Incubator.
Perforated shelves for Incubators Heratherm™
Stainless steel. Including 2 shelf suports.
Rapid tests Single agar Lovibond® Dipslides
The Lovibond® Dipslides are designed to test liquids as well as surfaces. They are ideal for use in many applications including evaporative cooling towers, closed water circuits, cutting fluids, food testing, and many more.For the determination of the total count.
Stacking kits for Ovens and Incubators Heratherm™
For stacking devices on top of each other. Recommended when performing decontamination cycles in the lower unit.
Support stand for Ovens and Incubators Heratherm™
With casters. Height including casters 187 mm.
Tube tests for anaerobes Lovibond® Dipslides
The Lovibond® Dipslides are designed to test liquids as well as surfaces. They are ideal for use in many applications including evaporative cooling towers, closed water circuits, cutting fluids, food testing, and many more.Semisolid medium measures anaerobic bacteria and indicates microbial induced corrosion.
Wire mesh shelves for Ovens and Incubators Heratherm™
Including 2 shelf supports.