Drip pan for incubator INC 125 F digital and incubator shaker INC 125 FS digital
Ideal for collecting accidentally spilled samples or for use as a water reservoir to reduce evaporation losses during the cultivation process.
Hybridisation bottles
For use with Stuart hybridisation ovens. Heavy wall borosilicate glass. Suitable for autoclaving up to 140 °C.
Incubator BF Classic.Line
Incubators for long-term stable continuous operation. Ideal for gentle incubation of organisms and other incubation tasks.APT.line™ preheating chamber technologySafe and reproducible results even with high batch throughputs in long-term operationDisinfection routine at 100 °CAdjustable exhaust air flapController with timer functionsInner door made of tempered safety glass2 chrome-plated racksClass 3.1 independent temperature safety device (DIN 12880) with visual temperature alarmComputer interface RS 422Incubators with forced convectionAdjustable fan speedTemperature stability ±0.1 K (at 37 °C)
Incubator INC 125 F digital
The incubator is designed for precise temperature control during microbiological applications up to 100 °C. INC 125 F digital is a forced air incubator with powerful pre-heat air inlet to ensure fast, stable and uniform tempering performance.Excellent temperature stability and temperature uniformity of +/-0.3 °CAvailability of counter, timer and timer auto modesElectronically adjustable ventilation flap and fan speed from 0% to 100%Decontamination mode availableEasy to clean chamber made of corrosion-resistant AISI 304 materialExcellent chamber insulationUp to 2 units (incubator shaker or incubator) stackable (accessories required)Additional inner glass door that prevents dissipation of heat when the outer door is opened to observe the samplesLockable door (optional accessory)Door hinge changeable upon request
Incubator INC-200, analogue
The incubator is suitable for a wide range of applications, such as plant propagation, humidity testing, simulation of climatic conditions, and corrosion testing. Forced air circulation and electronic temperature control ensure accurate temperature conditions.Clear acrylic construction offers full view of the samplesHinged front door panel facilitates sample access2 feed-throughs (Ø 10 mm) on the side wallsTemperature safety cut-out is set at 72 ºCWith BioCote, silver-based, antimicrobial protection on the metal surfaces.With analogue temperature control
Incubator INC-200D, digital
The incubator is suitable for a wide range of applications, such as plant propagation, humidity testing, simulation of climatic conditions, and corrosion testing. Forced air circulation and electronic temperature control ensure accurate temperature conditions.Clear acrylic construction offers full view of the samplesHinged front door panel facilitates sample access2 feed-throughs (Ø 10 mm) on the side wallsTemperature safety cut-out is set at 72 ºCWith BioCote, silver-based, antimicrobial protection on the metal surfaces.With digital temperature controlLCD display
Incubator Lovibond® DI 10
For fast and reliable incubation of dipslides in the laboratory or in the field directly during sampling.Low voltage, in-car operation possibleHolds up to 12 dipslides or 10 quanti-discsExcellent temperature stabilityProgrammable incubation period settingLCD Temperature display with up/down push button controlRapid heating times for fast testingExternal status LEDsScope of supply: Incubator incl. external 12 V universal power supply, set of leads (UK, EU, US), 12 V in-car power adapter
Incubator, mechanical control, B 28 series
Robust, small, space-saving unit with mechanical controller and adjustable ventilation for accurate and reliable incubation.Temperature range: 30 °C to 70 °CInner glass door
Incubators BD Avantgarde.Line
Incubators with homogeneous temperature distribution ensure the best results for a wide range of incubation tasks.High temperature accuracy thanks to APT.line™ technology100 °C disinfection routineHigh process reliabilityController with LCD displayElectromechanical control of the exhaust air flapInner door made of tempered safety glass2 chrome-plated racksChambers up to 115 l are stackableClass 3.1 integrated independent temperature safety device (DIN 12880) with visual alarmErgonomic handle designUSB connection for data recordingIncubators with natural convection
Incubators BD Classic.Line
Incubators for long-term stable continuous operation. Ideal for gentle incubation of organisms and other incubation tasks.APT.line™ preheating chamber technologySafe and reproducible results even with high batch throughputs in long-term operationDisinfection routine at 100 °CAdjustable exhaust air flapController with timer functionsInner door made of tempered safety glass2 chrome-plated racksClass 3.1 independent temperature safety device (DIN 12880) with visual temperature alarmComputer interface RS 422Incubators with natural convection
Incubators BD-S Solid.Line with natural convection
Standard incubators for research and quality control.APT.line™ preheating chamber technology for exact temperature controlNatural convection with homogenous temperature distributionAdjustable exhaust air flapDigital controller with timerInner door made from safety glassClass 3.1 integrated independent adjustable temperature safety device (DIN 12880) with visual alarm
Incubators BF Avantgarde.Line
Incubators with homogeneous temperature distribution ensure the best results for a wide range of incubation tasks.High temperature accuracy thanks to APT.line™ technology100 °C disinfection routineHigh process reliabilityController with LCD displayElectromechanical control of the exhaust air flapInner door made of tempered safety glass2 chrome-plated racksChambers up to 115 l are stackableClass 3.1 integrated independent temperature safety device (DIN 12880) with visual alarmErgonomic handle designUSB connection for data recordingIncubators with forced convectionAdjustable fan speedTemperature stability ±0.1 K (at 37 °C)
Incubators IF
Incubators for research, medicine, pharmacy, and food technology. Ideal for all applications with temperatures up to 80 °C, especially for incubating living cultures at 37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are excluded, and the load is warmed up particularly carefully.User-friendly, intuitive operating menuPrecise and homogeneous temperature control thanks to product-specific heating conceptPre-heated fresh air prevents temperature fluctuationsWith inner glass doorForced air circulationFan speed adjustableSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
Incubators IFplus
Incubators for research, medicine, pharmacy, and food technology. Ideal for all applications with temperatures up to 80 °C, especially for incubating living cultures at 37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are excluded, and the load is warmed up particularly carefully.User-friendly, intuitive operating menuPrecise and homogeneous temperature control thanks to product-specific heating conceptPre-heated fresh air prevents temperature fluctuationsWith inner glass doorForced air circulationFan speed adjustableSterilization programme (4 h/160 °C) for sterilization of working chamberTwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Incubators IN
Incubators for research, medicine, pharmacy, and food technology. Ideal for all applications with temperatures up to 80 °C, especially for incubating living cultures at 37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are excluded, and the load is warmed up particularly carefully.User-friendly, intuitive operating menuPrecise and homogeneous temperature control thanks to product-specific heating conceptPre-heated fresh air prevents temperature fluctuationsWith inner glass doorNatural convectionSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
Incubators INplus
Incubators for research, medicine, pharmacy, and food technology. Ideal for all applications with temperatures up to 80 °C, especially for incubating living cultures at 37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are excluded, and the load is warmed up particularly carefully.User-friendly, intuitive operating menuPrecise and homogeneous temperature control thanks to product-specific heating conceptPre-heated fresh air prevents temperature fluctuationsWith inner glass doorNatural convectionSterilization programme (4 h/160 °C) for sterilization of working chamberTwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Microbiological incubators Heratherm™ Advanced Protocol Security, floor-standing models with powder-coated exterior housing
Incubators with additional safety features for ultimate sample protection. The 140 °C decontamination cycle is certified by an accredited microbiological institute and eliminates the need for separate autoclaving of internal fittings, as unwanted microorganisms are reduced to a minimum within 6 hours.Intuitive operation for easy temperature settingEasy-to-read, large vacuum fluorescence displayInternal glass door for safe observation of samples without affecting the temperatureAdvanced digital timer for daily/weekly on/off cyclesAudible alarm if door is left open accidentallyAutomatic alarm for over- and under-temperatureEasy cleaning of the interior due to rounded cornersChamber made of corrosion-resistant stainless steelEfficient use of the interior with the flexible shelf systemIncubators with powder-coated steel exterior housingWith mechanical convectionFan speed adjustable (slow/high speed)
Microbiological incubators Heratherm™ Advanced Protocol Security, floor-standing models with stainless steel exterior housing
Incubators with additional safety features for ultimate sample protection. The 140 °C decontamination cycle is certified by an accredited microbiological institute and eliminates the need for separate autoclaving of internal fittings, as unwanted microorganisms are reduced to a minimum within 6 hours.Intuitive operation for easy temperature settingEasy-to-read, large vacuum fluorescence displayInternal glass door for safe observation of samples without affecting the temperatureAdvanced digital timer for daily/weekly on/off cyclesAudible alarm if door is left open accidentallyAutomatic alarm for over- and under-temperatureEasy cleaning of the interior due to rounded cornersChamber made of corrosion-resistant stainless steelEfficient use of the interior with the flexible shelf systemIncubators with stainless steel exterior housingWith mechanical convectionFan speed adjustable (slow/high speed)
Microbiological incubators Heratherm™ Advanced Protocol Security, tabletop models with powder-coated exterior housing
Incubators with additional safety features for ultimate sample protection. The 140 °C decontamination cycle is certified by an accredited microbiological institute and eliminates the need for separate autoclaving of internal fittings, as unwanted microorganisms are reduced to a minimum within 6 hours.Intuitive operation for easy temperature settingEasy-to-read, large vacuum fluorescence displayInternal glass door for safe observation of samples without affecting the temperatureAdvanced digital timer for daily/weekly on/off cyclesAudible alarm if door is left open accidentallyAutomatic alarm for over- and under-temperatureEasy cleaning of the interior due to rounded cornersChamber made of corrosion-resistant stainless steelEfficient use of the interior with the flexible shelf systemIncubators with powder-coated steel exterior housingWith Dual convection technologyFan speed adjustable (0 to 100 %)Lockable incubator door with alarm for restricted accessEasily stackable without tools or stacking framesCompact dimensions for space optimisation on the lab bench
Microbiological incubators Heratherm™ Advanced Protocol Security, tabletop models with stainless steel exterior housing
Incubators with additional safety features for ultimate sample protection. The 140 °C decontamination cycle is certified by an accredited microbiological institute and eliminates the need for separate autoclaving of internal fittings, as unwanted microorganisms are reduced to a minimum within 6 hours.Intuitive operation for easy temperature settingEasy-to-read, large vacuum fluorescence displayInternal glass door for safe observation of samples without affecting the temperatureAdvanced digital timer for daily/weekly on/off cyclesAudible alarm if door is left open accidentallyAutomatic alarm for over- and under-temperatureEasy cleaning of the interior due to rounded cornersChamber made of corrosion-resistant stainless steelEfficient use of the interior with the flexible shelf systemIncubators with stainless steel exterior housingWith Dual convection technologyFan speed adjustable (0 to 100 %)Lockable incubator door with alarm for restricted accessEasily stackable without tools or stacking framesCompact dimensions for space optimisation on the lab bench
Microbiological incubators Heratherm™ Advanced Protocol, with powder-coated exterior housing
Incubators with Dual convection technology are ideal for drying applications.Intuitive operation for easy temperature settingEasy-to-read, large vacuum fluorescence displayInternal glass door for safe observation of samples without affecting the temperatureFan speed adjustable (0 to 100 %)Advanced digital timer for daily/weekly on/off cyclesEasy cleaning of the interior due to rounded cornersChamber made of corrosion-resistant stainless steelEfficient use of the interior with the flexible shelf systemCompact dimensions for space optimisation on the lab benchTable-top units easily stackable without tools or stacking framesIncubators with powder-coated steel exterior housing
Microbiological incubators Heratherm™ General Protocol
Thermo Scientific™ Heratherm™ General Protocol incubators have been designed for routine applications in pharmaceutical, medical, food and research laboratories. Gravity convection provides gentle air flow and minimal drying out.Corrosion resistant stainless steel chamber (1.4016)Intuitive user interface for easy temperature settingLarge vacuum fluorescent display for easy readingSafe view of samples through internal glass door, without impact on temperatureAutomatic overtemperature alarmEasy to clean interior with rounded cornersEfficient small footprint to optimize benchtop spaceEfficient utilization of interior with flexible shelf systemTabletop models conveniently stackable without the need for tools or stacking kitsLockable casters for easy mobility and stability (floor models only)
Microbiological rapid tests Dual agar Lovibond® Dipslides
The Lovibond® Dipslides are designed to test liquids as well as surfaces. They are ideal for use in many applications including evaporative cooling towers, closed water circuits, cutting fluids, food testing, and many more.These dual-sided Dipslides are available in a wide range of different media types.
Microplate incubator INC-200D-M
A dedicated microtitration plate incubator, working volume 20 litres. Up to 48 x 96-well plates can be held, evenly distributed onto four pull-out stainless steel shelves, one or two layers deep. Precise, even temperature control is maintained throughout the chamber by forced circulation of preheated air from one side to the other across the plates. When filled with 24 x 96-well plates evenly distributed and at a temperature setting of +37°C, variation of temperature between shelves is maintained to within ±0.5°C and fluctuation to within ±0.5°C. A removable stainless steel tray in the chamber base may be filled with water to increase humidity. The 10mm clear acrylic door opens upwards. For 230V 50Hz single phase supplies, 280W.With BioCote, silver-based, antimicrobial protection.
Mini Incubator, with Mini LabRoller™ and rotisseries
Compact incubator is suitable for microbiological and haematological applications, such as cultivation of Petri dishes, microtitre plates, and other small-volume vessels.Interior volume of 9.2 lDoor with large windowCable port on the backPort for a thermometer on the topAnalogue control2 shelf levelsThe incubator is supplied with Mini LabRoller™ and rotisseries for 1.5 ml, 15 ml, and 50 ml tubes.
Mini Incubator, with shelf
Compact incubator is suitable for microbiological and haematological applications, such as cultivation of Petri dishes, microtitre plates, and other small-volume vessels.Interior volume of 9.2 lDoor with large windowCable port on the backPort for a thermometer on the topAnalogue control2 shelf levelsThe incubator is supplied with one shelf.
Mini-Incubator CULTURA® M, with Multirack
The CULTURA® M Mini-Incubator has specifically been designed for the incubation of contact slides and dipslides, as well as common Petri dishes for detecting bacteria, fungi, and yeasts. With its extremely small footprint, it can easily be transported wherever you need to use it. The CULTURA® M incubator has an internal capacity of approximately 4 l. It is used in the areas of medical diagnostics and water analytics. The transparent door allows monitoring of the interior without opening the incubator.Supplied with one Multirack for the incubation of up to 18 dipslides and a thermometer.
Mini-Incubator CULTURA® M, with Multirack and LLG-Min/Max Digital-Thermometer
The CULTURA® M Mini-Incubator has specifically been designed for the incubation of contact slides and dipslides, as well as common Petri dishes for detecting bacteria, fungi, and yeasts. With its extremely small footprint, it can easily be transported wherever you need to use it. The CULTURA® M incubator has an internal capacity of approximately 4 l. It is used in the areas of medical diagnostics and water analytics. The transparent door allows monitoring of the interior without opening the incubator.Supplied with one Multirack for the incubation of up to 18 dipslides, one shelf, and one thermometer.Supplied with a free LLG-Min/Max Digital-Thermometer with outdoor sensor.
Mini-Incubator CULTURA® M, with shelf
The CULTURA® M Mini-Incubator has specifically been designed for the incubation of contact slides and dipslides, as well as common Petri dishes for detecting bacteria, fungi, and yeasts. With its extremely small footprint, it can easily be transported wherever you need to use it. The CULTURA® M incubator has an internal capacity of approximately 4 l. It is used in the areas of medical diagnostics and water analytics. The transparent door allows monitoring of the interior without opening the incubator.Supplied with one shelf and one thermometer.
Mini-Incubator Heratherm™ Compact IMC 18
The most compact unit of the Heratherm™ microbiological incubator family has an 18 l capacity, ideal for personalized workspace.Minimal footprint for space restricted lab areasTemperatures at or below ambientHigh temperature accuracyInternal light facilitates sample observationThe most compact unit of the Heratherm™ microbiological incubator family has an 18 l capacity, ideal for personalized workspace.Minimal footprint for space restricted lab areasTemperatures at or below ambientHigh temperature accuracyInternal light facilitates sample observation
Mini-Incubator Heratherm™ Compact IMC 18, with darkened windscreen
The most compact unit of the Heratherm™ microbiological incubator family has an 18 l capacity, ideal for personalized workspace.Minimal footprint for space restricted lab areasTemperatures at or below ambientHigh temperature accuracyInternal light facilitates sample observationMini-Incubator with darkened windscreen
Multirack for Mini-Incubator CULTURA® M, ABS
With the practical Multirack, up to 18 imprint tests (Ø 25 to 30 mm) can be incubated in the CULTURA® M Mini-Incubator.
Perforated shelves for Incubators Heratherm™
Stainless steel. Including 2 shelf suports.