Cool Containers True North®, PU
Rigid polyurethane container provides durability for chilling your temperature sensitive samples. Excellent insulation properties for ultra cold. Use with ice, dry ice and ice-salt slurries, etc. For low temperature use down to -196°C. Minimize evaporation loss with close fit lid. Easily remove with comfortable recessed knobs. Keyed lid and base fit together to conveniently store lid under base. With spout and ergonomic handles for safe handling. Stackable.*(diam. x H)
Cool packs Freez'Pack®
Composition: water, carboxymethyl cellulose, acticides and blue dyeSuitable for food contact (non-toxic coolant)Dishwasher safe
Cool packs Icecatch®
Icecatch® cool packs for temperature sensitive products used in the pharmaceutical, biotech, medical and food industries. Icecatch® cool packs distinguish themselves through the following specific features:Reliable cold storage through the use of immobilised coolantFor repeat usage due to the use of robust PA/PE filmDisposal with the domestic trash due to the use of non-poisonous ingredientsUnobjectionable use in the pharmaceutical and food industriesPhase transition 0°CIcecatch®-Gel Spreading of heat absorption around the 0°C range through the use of immobilised cooling gelOptimal price / heat absorption capacity relationshipFilled with cooling gelIcecatch®-Solid Maximum dimensional stability during the freezing process through the use of hard foamFilled with hard foamIcecatch®-Solid Insulated 2 - 8 °CA perfect cool pack in combination with our System packaging for the +2 °C up to +8 °C transportMaximum dimensional stability during the freezing process through the use of hard foam, coolant and integrated isolation layerFilled with hard foam and isolation layer
Cooling bag Fold'N Cool™
The cooler Fold'N Cool™ 30 L has a wide range of uses and can be laid flat after use. 1 large front pocket with zip, 2 carrying handles and hanging loop.100 % polyester with PU coating on the backEasy-to-clean inner material, food-free PEVAIsolation: high-performance EPE foamDark blue / grey
Cooling block system IsoTherm-System®, IsoPack and IsoRack set
Modular system for transporting, storing, and gently thawing deep-frozen samples.Holds 24 tubes (1.5 ml, 2 ml)IsoPack (cold pack) white holds 0 °C for up to 6 h and blue holds -21°C for up to 3 h, pre-cooling in the freezerNo more melting ice baths (contamination risk)All system components can be used separatelyRacks can be stacked, are autoclavable, float in water and can be centrifuged in a microtitration plate rotorScope of supply: 1 x IsoRack (work rack), 1 x IsoPack (cold pack)
Cooling Block Systems, FreezeBox™
Blue. FreezeBox™ is a new, energy-saving, environmentally friendly and safe cooling equipment, without additives. It does not require electricity (except for pre-cooling the cores in the freezer) and no ice for low-temperature cooling of biological samples. The system can be used ice-free, is lightweight, easy to transport and ideal for the collection and storage of biological samples. It can be combined with interchangeable cores and different tube modules. Cooling cores can be tempered in a refrigerator or freezer and inserted into the FreezeBox™. For operation with dry ice, leave out the cooling core and fill with 200 g dry ice instead.For use with cooling core, ice or dry iceEasy to clean and disinfectDurable, suitable for frequent useEasy to mount
Cooling boxes Powerbox® Plus
Cooling capacity: 22 °C (± 1 °C) below ambient temperature.
Cooling boxes Powerbox® Plus, with mains connection
Cooling capacity: 19 °C (± 1 °C) below ambient temperature. With plugs for 12 V car connection and 230 V socket.
Cooling Boxes, Icetime® Plus
Strong, high quality PU insulation,Lockable lid, which clicks audibly when closingHandle for easy transport
Cooling Boxes, Isotherm Extreme
Strong, high quality PU insulationCompact and robust cool boxesCover can be locked with carrier bracketRubber seal for airtight seal
Cooling boxes, PUR, with lid
For bench-top cold storage.Durable, rigid polyurethane foamGood insulating propertiesImproved stability because of sturdy, octagonal designStackableSuitable for chemical disinfectionOperating temperature -196 °C to 95 °C
Cryo-Safe™ Coolers
Use to protect samples on the bench, during transport, or in freezers with defrost cycle and fluctuating temperaturesPolycarbonate. A non-toxic freezing gel is isolated within the walls of the cooler, guaranteeing that labels or marks on the vials or tube are not damaged.The indexed and transparent (9.401 090, 9.401 091, 9.401 092) or gel-filled (9.401 093, 9.401 094) polycarbonate lid shows tube location and matches locations printed on the coolerSide handles ( 9.401 090, 9.401 091) or a wire handle for easy carryingCoolers can be stacked to save space and maximize freezer volumeRubber feet to prevent slippingAll polycarbonate cooler body easy to clean
Euronormboxes, PP, stackable
Solid transparent plastic containers, odorless, cold- and heat-resistant, stable against the most acids and alkalis. Dishwasher safe, food safe. Corresponding lids please order separatelySuitable Trolley (Cat. No.: 9.301 502)
Freezing Aid for Cell Cultures, FreezerCell™
FreezerCell™ can be used for a variety of cell types, including stem cells, primary cells, cell lines and yeasts. The FreezerCell™ does not require any additives and only needs to be placed in an ultra deep freezer and the cooling runs at -1°C per minute. Fill the freezing aid with the cryotubes and freeze for approx. 3 hours at -80 °C. Then the samples are readyto transfer to a nitrogen tank. This gentle method ensures a high survival rate of the cells during the freezing process.No pre-cooling necessaryConsistent temperature distribution, even with partial loadingLid can be opened easily
Insulated containers Magic Touch 2™, with lid
Excellent insulating properties combined with high chemical resistance, the ice containers can be used with wet ice as well as with dry ice, ice-salt mixtures, dry ice methanol mixtures or liquid nitrogen.DurableImpervious to moisture and odorsWith pour spout, drip-proof rims and fill line indicatorLightly textured non-slip finishTemperature range: -196 °C to 100 °CExcellent insulating properties combined with high chemical resistance, the ice containers can be used with wet ice as well as with dry ice, ice-salt mixtures, dry ice methanol mixtures or liquid nitrogen.DurableImpervious to moisture and odorsWith pour spout, drip-proof rims and fill line indicatorLightly textured non-slip finishTemperature range: -196 °C to 100 °C
Isolating box with lid
The insulation boxes are suitable for the transport and storage of temperature-sensitive products.To maintain cold chainsStackableNeopor® is characterised by its high hot and cold thermal insulation properties, compressive strength, shock absorbing properties, low weight and insensitivity to moisture. In addition, it has infrared absorbers and reflectors that reduce thermal conductivity and give the box its silver-grey colour.
IsoTherm-System®, starter set
Modular system for transporting, storing, and gently thawing deep-frozen samples.Holds 24 tubes (1.5 ml, 2 ml)IsoPack (cold pack) white holds 0 °C for up to 6 h and blue holds -21°C for up to 3 h, pre-cooling in the freezerNo more melting ice baths (contamination risk)All system components can be used separatelyRacks can be stacked, are autoclavable, float in water and can be centrifuged in a microtitration plate rotorScope of supply: 1 x IsoSafe (insulating box), 1 x IsoRack (work rack), 1 x IsoPack (cold pack) 0 °C, 1 x IsoPack (cold pack) -21 °C
Labtop Cooler Nalgene™, Type 5115, 5116, DS5116
The economical alternative for keeping samples and biochemical reagents cool at the workbench or for protecting against temperature fluctuations and power failure in refrigeration apparatus. With write-on, gridded lid. Lids fit one way to maintain the correct grid orientation. Robust, space-saving and stackable. With non-slip rubber feet. Can be used down to -135°C. Adapters are also supplied for 0.5ml microtubes.
LLG-Freezing container
The LLG-Freezing container is a simple system for rapid cryo preservation of cells in a freezer. Up to 18 cryovials with a volume of 1 or 1.8 ml can be placed in the freezing container.Made of PC with HDPE closureCooling rate of -1 °C/min100 % isopropyl alcohol is required for use.
Mini coolers, PC
Mini coolers are designed to protect a wide range of solutions (enzymes, DNA, RNA, cell suspensions) by helping to maintain freezer temperatures on the lab bench. Durable polycarbonate filled with non-toxic gel. Mini coolers hold twelve 0.5 ml to 2.0 ml tubes.
Nalgene Freezing container Mr. Frosty, PC
With 120mm diameter screw cap in blue HDPE, vial holder made of white HDPE. Foam interior. Cooling rate 1°C/min. Tubes can be easily removed. Each aperture has a moulded number for identification. Stackable.
Safety Boxes, Styrofoam® (EPS) with lid
For glass bottles with dangerous contents. With BAM approval.
Standard Insulated box, Styrofoam
The insulated boxes, in combination with the separately available Icecatch® cooling elements, are ideal for transporting temperature-sensitive products and samples.
System packaging Icecatch®, EPS
This system solution, is a combination of a specific EPS Box and the cooling element Icecatch®-Solid Insulated (Cat-No. 9.695 007). It is the perfect medium for the transport of temperature sensitive products in the spectrum of 2 °C up to 8 °C.In this solution there is no need of a combination of variably precondition cooling elements. By the use of an easily convertible packaging instruction the packaging process is simplified and wrong assembly is excluded.Easy handling, no ''thawing'', no additional isolation materialModular system in terms of temperature an run time requirementsPrequalified system solution consisting of the EPS Box and Icecatch®-Solid Isolated 2 °C - 8 °CImmediate availability